Page 5 of 18 « First 34 5 6715 Last »
Reply
Thread Tools
thonayan99 is offline thonayan99
2009-11-25 , 22:17
Posts: 43 | Thanked: 1 time | Joined on Nov 2009
#41
Originally Posted by FC_ View Post
Well, I couldn't get the flasher-3.5 working under Windows 7, so I downloaded Ubuntu (a linux distribution which can be booted from CD-ROM without installing) and tried it there. But that shouldn't make any difference if you see the flasher program flash it, and saying the flash was succesfull.

I first flashed the RX-51_2009SE_1.2009.42-11_PR_COMBINED_MR0_ARM.bin rom, which is the global release, because I have a dutch N900. I saw you tried the middle east/northern africa rom, so I assume you live in the middle east or northern africa.

And I used exactly the same command as you did:
flasher-3.5 -F RX-51_2009SE_1.2009.42-11_PR_COMBINED_MR0_ARM.bin -f -R

But that didn't work. So then I flashed it again with the eMMC rom:
flasher-3.5 -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin -f -R


Both times the flasher-3.5 program said something like "flash succesfull" and after this the device worked perfectly except the for microphone. But that is another problem, and has nothing to do with the memory being corrupted.
did you notice the above step for eMMC command (2nd step) ran less than a second and disappear, when i do this step only it wil ran for one second but the device afterthat is dead you can't switch it on unless i follow and do the other command and it is start to work again. is this happening to you.?
 
FC_ is offline FC_
2009-11-25 , 22:23
Posts: 13 | Thanked: 2 times | Joined on Nov 2009
#42
No, the eMMC flash will take at least a minute or two. So I think you did something wrong, because it at least has to say something like "flash failed". Or your memory is even more corrupted than mine was and you can't flash it.

When you flash the "COMBINED" rom of 160MB, does it take a while, and you see "flash successfull" when it's done?
 

The Following User Says Thank You to FC_ For This Useful Post:
thonayan99 is offline thonayan99
2009-11-25 , 22:26
Posts: 43 | Thanked: 1 time | Joined on Nov 2009
#43
what about you mentioned....."the Ubuntu (a linux distribution which can be booted from CD-ROM without installing)"

from wr u get it and did you burn it on CD and run it on your Wind 7? may be this is the trick here...
 
FC_ is offline FC_
2009-11-25 , 22:29
Posts: 13 | Thanked: 2 times | Joined on Nov 2009
#44
If the flasher tool works on Windows 7 that really shouldnt matter. But does it really work for you? When you run it you should see the progress of the flash, and get a confirmation in the end that the flash was succesfull, do you see that?
 
thonayan99 is offline thonayan99
2009-11-25 , 22:34
Posts: 43 | Thanked: 1 time | Joined on Nov 2009
#45
Originally Posted by FC_ View Post
If the flasher tool works on Windows 7 that really shouldnt matter. But does it really work for you? When you run it you should see the progress of the flash, and get a confirmation in the end that the flash was succesfull, do you see that?
yes it does for flashing using the middel east image as for the 1st step without problem...but when it comes to eMMC file it doesn't give me the progress the only thing i guss it is work cz it tell me it is waiting for usb connection and once i connect the device to the usb it start to work but in less than a second.

this is way i am asking if i can donload what you mention in a CD so that i can run it in the CD-ROM as you mentioned. by the way how many times you tried reflashing for the eMMC (2nd step).

and thanks to be patiant with us..
 
thonayan99 is offline thonayan99
2009-11-25 , 22:44
Posts: 43 | Thanked: 1 time | Joined on Nov 2009
#46
just clarification here we got two falsh to do one is for the combinde image command and the other is for the eMMC image.

the 1st one i can see the progress report and take 1-2 minutes.

the 2nd one i can't see any porgress and it takes less than a second and disapper but after that the device is dead no way to start it up unless i do the 1st step again then the life come back to it.
 
FC_ is offline FC_
2009-11-25 , 22:45
Posts: 13 | Thanked: 2 times | Joined on Nov 2009
#47
Ubuntu is a linux distribution, it's like a replacement for Windows. But you can try it without installing it. You have to download it, burn it to CD, and boot from the CD. You will then enter the linux environment, and you have to open a terminal (like command prompt in windows) and go to the directory where you downloaded the roms, and run flasher (it's already installed).

This is not that easy for someone who doesn't know what he's doing, and difficult to explain.

Download here: http://www.ubuntu.com/getubuntu/download
 
thonayan99 is offline thonayan99
2009-11-25 , 22:49
Posts: 43 | Thanked: 1 time | Joined on Nov 2009
#48
i think the problem i am facing now is in step # 2. Do you have any suggestion.
 
FC_ is offline FC_
2009-11-25 , 22:52
Posts: 13 | Thanked: 2 times | Joined on Nov 2009
#49
I don't know man. If you can flash the combined rom in step 1 without problems, step 2 should work. So think your memory is just more corrupted than mine was. I think the only way is to return it to Nokia.
 

The Following User Says Thank You to FC_ For This Useful Post:
thonayan99 is offline thonayan99
2009-11-25 , 22:58
Posts: 43 | Thanked: 1 time | Joined on Nov 2009
#50
thank you FC_. but it will take a week for me to return it back to nokia for different reason. Thank you agian man

any other suggestions from experts N900.
 
Reply
Page 5 of 18 « First 34 5 6715 Last »

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 02:14.

Contact Us - Home - Archive - Top