Still getting a bug which disables my camera. Steps to reproduce:
Open the shutter.
With the camera app still open, go to the desktop.
Start Flashlight
return to the camera app and try to take a picture. The camera will report "Operation Failed".
Any further attempt to load the camera app without resetting the N900 will report "Operation Failed".
Please, anyone see if they can confirm this. Also, is there a bugtracker that I should be reporting to?
Still getting a bug which disables my camera. Steps to reproduce:
Open the shutter.
With the camera app still open, go to the desktop.
Start Flashlight
return to the camera app and try to take a picture. The camera will report "Operation Failed".
Any further attempt to load the camera app without resetting the N900 will report "Operation Failed".
Please, anyone see if they can confirm this. Also, is there a bugtracker that I should be reporting to?
2. Driving LEDs safely. From what we've determined, LEDs are only rated for 320 mA for .5 seconds, and 50mA continuous. Does this drive the LEDs at full brightness, or at safe levels for continous?
Anyone know this, the developer? I really don't want to break the LEDs....
I d like to know f it is possible to tweak something to get a pop up when the lens cover is open to choose if i want the camera app or to switch of the LED?
2. Driving LEDs safely. From what we've determined, LEDs are only rated for 320 mA for .5 seconds, and 50mA continuous. Does this drive the LEDs at full brightness, or at safe levels for continous?
LEDs are tough to break...but if this app sets the LEDs to maximum brightness (like the brightness the moment you take a picture with flash), it will shorten lifespan.
I cannot get this Flashlight to work on my device at all. It some what disappeared completely after the installation. It won't show up as widget applet. I reinstalled like 10times and restart my device over and over. But no dice..
This flashlight app is cool! Finally I can use my phone as if it is a real torch! Thankfully the flashlight is not in red like my n95 8gb used to...
Open camera cover, close the camera application. At the desktop, Press the status bar (the bar with the clock) as you would do to initiate internet connection or wifi, you should see "Flashlight" appears in the status menu.
An interface which I would really like to have is for the flashlight to be activated by sliding the lens cover open twice within two seconds, e.g. open-shut-open. Then there would be no need to fiddle with the on-screen interface (which for me means putting on my reading glasses!).
