shamoni8 | # 171 | 2010-01-30, 17:26 | Report

do i need a connection to the net to install this? whenever i click on the app manager, it tells me to specify a data source?

also, it gave me errors
the first one told me to enable RD mode if i want to break my device

and the second one told me it could not open lock file/var/lib/dpkg/lock - open
and E: Unable to lock the admin directory, are you root?

---

Last edited by shamoni8; 2010-01-30 at 17:31.

plaban | # 172 | 2010-01-30, 17:31 | Report

Yes you need internet connection in your mobile to install this.

jgarneau | # 173 | 2010-01-30, 19:13 | Report

OK, I found a solution for my call forwarding problem with my Nokia N900

First, I am from Canada and I am using phone service with this company: http://www.fido.ca/

The condition may be different if you are from a different country or you are using a different company.

To call forward your call:
1.Open X Terminal
2.type «pnatd»
3.To call forward to number 14186562131 type «AT+CCFC=0,1,"+14186562131"»
4.To cancel call forward type «AT+CCFC=0,0»
5.To check if the unconditional call forwarding is on or off type «AT+CCFC=0,2»

According to my phone company, *21*14186562131# is the USSD code to call forward. (http://www.fido.ca/web/content/faq/faq_call_forwarding)

This doesn't work with my nokia. I tried ussd-pad and ussd-widget without any success

To found the solution, I used those two links:
http://sw.nokia.com/id/95672052-6c77...ts_v1_2_en.pdf

http://www.forum.nokia.com/piazza/wi...T-Commands.doc

Thank you everyone.

---

Last edited by jgarneau; 2010-01-30 at 20:22.

KiberGus | # 174 | 2010-01-30, 20:06 | Report

2 jgarneau
I don'y know, why that ussd queries don't work. If you find bug in my code, I'll fix it. I'm not going to implement call forwarding application, but you are free to look at ussd-common code, especially ussdquery.py, and write your own script, which will invoke pnatd and do needed queries.

2 lendurhenry
I've implemented banner idea and redesigned workflow, now regexp is applied first, then two parsers and chain. I'll describe it on separate page.
This version will be available today or tomorrow.
I'm not going to implement it this way. Instead I want implement interface for controlling widgets by programs, then you can organize such groups by writing specialized parsers or chains. This will make widget absolutely finished because you would be able to implement any behavior. But I don't think I'll start working on it in near future.

2 all
If you have any wishes, post them now, not when I'll swithc to another task.

jgarneau | # 175 | 2010-01-30, 20:31 | Report

2 KiberGus,

I don't think there is a problem with your code.

ussd-pas and ussd-widget return me the same answer as the CUSD command with pnatd «UKNOWN APPLICATION».

Thank you for your help.

KiberGus | # 176 | 2010-01-31, 09:35 | Report

Final version should be available as soon, as autobuilder builds it. There is also an article, describing how widget works:
http://kibergus.su/en/node/3
There are several advises hor to configure widget for different cases.

白い熊 | # 177 | 2010-01-31, 12:31 | Report

How do you put in a reply to the operator?

Is it what the chain does?

I.e., to query the balance I need to dial *102#
that's easy, put that into the config. Then the operator sends back a menu, in which I need to select the 1st option, i.e. 1.

Should I put 1 into the chain box, or echo 1, or it doesn't work yet, or how?

KiberGus | # 178 | 2010-01-31, 12:52 | Report

USSD menu navigation is not supported.

白い熊 | # 179 | 2010-01-31, 13:00 | Report

Damn it, so there is still no way to check the balance with Megafon in Russia, as they changed the direct access, to this stupid menu.

Is it hard to implement?

KiberGus | # 180 | 2010-01-31, 13:05 | Report

There is a way, but not in ussd widget, I'll think about it. I needed menu navigation too for activation of internet assistant. Here is how it is done:
So, basically, you just need to dial several numbers.