andy_x_net | # 171 | 2010-01-19, 23:22 | Report

im in uk u in australia, can it be the reason that the servers are still down here (dev and so) ???

jaeezzy | # 172 | 2010-01-20, 08:16 | Report

I just came across someone having similar problem and the problem was misspelled "fremantle" and if thats not u check yours too coz its the same settings for the whole world.

jsbigs | # 173 | 2010-01-24, 08:53 | Report

No luck here. Still get backend error after running /etc/init.d/lirc start as root. Restarting device didn't help either. Any advice?

Peelaa | # 174 | 2010-01-25, 18:17 | Report

Hi, not sure if this is the right place to post but i am looking for a bit of help. After a few days of messing around with this app i have it working and can control my tv but have still not acheived what i set out to do in the first place. I have just bought a new tv (LG M2262D) and i am trying to get into the service menu to enable avi playback through the usb. This can be done using a service remote or smart phone (s60) with different apps but i dont have one hence the reason i am using my n900. Anybody know config for the service remote (service menu button) on the LG M2262D. I can edit the config file but not sure what to edit it to.
Thanks in advance

---

Last edited by Peelaa; 2010-01-25 at 18:24.

Peelaa | # 175 | 2010-01-25, 21:31 | Report

You could try uninstalling irreco for n900 and anything that came with it and install qtirreco.

adrian pavlovic | # 176 | 2010-01-29, 23:27 | Report

So i have a problem with the irreco, im hopeing someone can help. I cannot get the buttons to work at all when i make a new button. had problem with commands for remote showing only wait 1, wait 2 etc, how do i fix this?

---

Last edited by adrian pavlovic; 2010-02-03 at 16:36.

taril | # 177 | 2010-02-12, 12:56 | Report

I would like to record with irrecord, but it does not work.
Is there anybody succes with it?

Or this irreco was simply recompiled for N900 without any test like the 90% of applications here in modaco.org?

jgombos | # 178 | 2010-02-13, 17:32 | Report

I like this idea.

However, most routers do not have USB ports, in which case the router has to be opened (https://wwwn.dd-wrt.com/wiki/index.p...alo_WHR-HP-G54) and wired to the serial transceiver (http://iguanaworks.net/product2.psp).

Do you think that will work equally well? Were you able to also record the OEM remote control signals on the router?

[EDIT] After more research, I've found that this will not work. The serial port interface ("SPI") internal to routers is not RS232, but rather 3.3v TTL. 3.3v is not enough to power any IR device on the market. A transceiver could be built for 3.3v TTL as a DiY project, but it probably would not have enough power to get across a room. In conclusion, daperl's approach needs a router that has a USB port.

(and no, it will not work to use a MAX3232 chip to convert a routers 3.3v TTL to RS232)

---

Last edited by jgombos; 2010-02-14 at 15:10.

taril | # 179 | 2010-02-17, 10:04 | Report

PR 1.1.1 irreco is unuseable, always drops Lirc error.

Attached Images

 

---

Last edited by taril; 2010-02-17 at 11:42.

aiyaznz | # 180 | 2010-02-20, 02:58 | Report

My remote control is not on the database. RM-GD007 (sony bravia KDL-40W5500). I did find the remote control file for psiloc irrmote for nokia s60s. Is it possible to use that in some way to make the code for my remoteon qt irreco?

This is the link for the remote: http://irremote.psiloc.com/Download.aspx?id=35054