Page 2 of 3 1 2 3
Reply
Thread Tools
fanoush is offline fanoush
2010-01-12 , 12:15
Posts: 2,152 | Thanked: 1,490 times | Joined on Jan 2006 @ Czech Republic
#11
BTW, I have tried it with NTSC before because my computer LCD panel visibly blinks when there is PAL signal on its composite output.

Few days ago I tried in with my LCD TV and PAL resolution. In PAL I can set Y resolution to be exactly 480 and everything is still visible. X dimension is hopeless since it cannot reach 800 anyway but when Y is 480, everything is only squashed horizontally and text (in browser, xterm and everywhere) is quite nice to read. Well unless one scrolls the screen, scrolling is quite ugly :-)
__________________
Newbies click here before posting. Thanks.

If you really need to PM me with troubleshooting question please consider posting it to the forum instead. It is OK to PM me a link to such post then. Thank you.
 
sph's Avatar
sph is offline sph
2010-01-12 , 12:44
Posts: 71 | Thanked: 47 times | Joined on Dec 2009
#12
Hm, don't know if was it the TV issue, it's said to be HD-ready but the resolution was far from 800x480, something like 400x300 at best.
 
slickyv is offline slickyv
2010-03-31 , 19:43
Posts: 14 | Thanked: 4 times | Joined on Mar 2010
#13
fanoush, how do I run that script you posted? Can I create a file to put on my desktop? Will this increase the output size to my lcd?
 
Noir86 is offline Noir86
2010-04-05 , 21:09
Posts: 7 | Thanked: 0 times | Joined on May 2009
#14
Hi my problem is next, i use a 5800 xpressmusic on my eonon car stereo and it works perfectly sound and video works fine it uses the same cable as the n900, but when i plug the n900 theres no output of nothing video or audio i try to turn on the stereo with the rca cable connected and nothing, try rebooting the n900 and nothing, but the curious case; i unmounted the stereo to see what my be the problem so i attach the video output to another source (the reverse camera in), then unplug and plug the cable, doing this causes that the audio on the aux input stars working then i plug the video out to the correct video in source (AUX video in), and it works YEAY; but when i unplug and plug the cable theres no audio and video all over again. So my cuestion is:

Is there any way to force the activation of the video output because it sems that the AUX video in of the car stereo doesn't recognize anything if its not sending a signal and since the n900 doesnt sends a signal if not detects a source well its practically imposible to make it works with my car stereo.
 
Royalridge is offline Royalridge
2010-04-06 , 10:02
Posts: 7 | Thanked: 8 times | Joined on Mar 2010 @ Dublin, Ireland
#15
Ok, so I'm a geek.

iVision 640x480 glasses being used with a N900, was watching a video but then wondered if the glasses would show the camera screen for taking pics of myself, and... yup, it worked.
Attached Images
 
 
bioepi is offline bioepi
2010-05-30 , 00:19
Posts: 13 | Thanked: 12 times | Joined on May 2010
#16
Originally Posted by Noir86 View Post
Hi my problem is next, i use a 5800 xpressmusic on my eonon car stereo and it works perfectly sound and video works fine it uses the same cable as the n900, but when i plug the n900 theres no output of nothing video or audio i try to turn on the stereo with the rca cable connected and nothing, try rebooting the n900 and nothing, but the curious case; i unmounted the stereo to see what my be the problem so i attach the video output to another source (the reverse camera in), then unplug and plug the cable, doing this causes that the audio on the aux input stars working then i plug the video out to the correct video in source (AUX video in), and it works YEAY; but when i unplug and plug the cable theres no audio and video all over again. So my cuestion is:

Is there any way to force the activation of the video output because it sems that the AUX video in of the car stereo doesn't recognize anything if its not sending a signal and since the n900 doesnt sends a signal if not detects a source well its practically imposible to make it works with my car stereo.
Yeah, i have the same problem and the same question, somebody can help us.
Maybe a script or widget to connect TV-OUT.
Thanks.
 
cicer is offline cicer
2010-07-21 , 01:39
Posts: 8 | Thanked: 2 times | Joined on Jul 2010
#17
I have a similar issue. My N900 doesn´t recognize the TV and my 5800 doesn´t have a problem.
But if a connect the N900 to a euroconector using an adaptor it works. Then I plug it in the video conector of the TV without unplugging the cable from the phone and it works, If I unplug the cable from the phone and plug in again it doesn´t work anymore.

I think it must be a software problem. I would prefer if it worked like the 5800 and you had to tell the phone what king of accesory you plug in and it showed in the status menu.
Originally Posted by Noir86 View Post
Hi my problem is next, i use a 5800 xpressmusic on my eonon car stereo and it works perfectly sound and video works fine it uses the same cable as the n900, but when i plug the n900 theres no output of nothing video or audio i try to turn on the stereo with the rca cable connected and nothing, try rebooting the n900 and nothing, but the curious case; i unmounted the stereo to see what my be the problem so i attach the video output to another source (the reverse camera in), then unplug and plug the cable, doing this causes that the audio on the aux input stars working then i plug the video out to the correct video in source (AUX video in), and it works YEAY; but when i unplug and plug the cable theres no audio and video all over again. So my cuestion is:

Is there any way to force the activation of the video output because it sems that the AUX video in of the car stereo doesn't recognize anything if its not sending a signal and since the n900 doesnt sends a signal if not detects a source well its practically imposible to make it works with my car stereo.
 
Deaconclgi is offline Deaconclgi
2010-07-21 , 02:39
Posts: 337 | Thanked: 192 times | Joined on Feb 2010 @ Atlanta
#18
I believe it is a problem with the Kernel software. Somewhere the tvout software got messed up. If I boot Titans OC kernel, only audio plays through TV out. If I load the Omap1 default kernel then everything works through tvout except on device recorded video. If I load the OC kernel again, it goes back to only audio. In my instance, I believe my kernel was messed up during the leaked PR1.2 and it carried over to the Nokia Omap1 kernel as even then I cant play videos recorded on the N900 via tvout.

I am not a programmer so I don't know how to validate any of this. All I know is that my tvout experience varies depending on the kernel that I have loaded.

Is it possible to load a PR1.1 or earlier kernel (not firmware) to possible get tvout working and then boot a newer kernel?
 
cicer is offline cicer
2010-07-21 , 19:21
Posts: 8 | Thanked: 2 times | Joined on Jul 2010
#19
Is there a command line to tell the kernel that a TV is connected? Then we could put a link in the desktop and we would have a workaround until this is properly fixed.
 
vijayv is offline vijayv
2010-11-13 , 15:45
Posts: 58 | Thanked: 10 times | Joined on Jan 2010
#20
Yes that would be the most optimum solution...

Anyone has a clue on how to do that ?




Originally Posted by cicer View Post
Is there a command line to tell the kernel that a TV is connected? Then we could put a link in the desktop and we would have a workaround until this is properly fixed.
 
Reply
Page 2 of 3 1 2 3

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 02:31.

Contact Us - Home - Archive - Top