[Annouce] HealthCheck - Hardware/System checker for the N900 - Page 40 - maemo.org

MohammadAG | # 391 | 2010-04-05, 12:07 | Report

Originally Posted by Venomrush View Post

Can we add a tab to do:

(checking for updates and install latest packages)

Don't do dist-upgrades on the N900, use apt-get upgrade to install updates.

The Following User Says Thank You to MohammadAG For This Useful Post:
noobmonkey

noobmonkey | # 392 | 2010-04-05, 12:15 | Report

think i need to figure out sudoers to get that working

lots more info added today will put a new devel version up tonight.

noobmonkey | # 393 | 2010-04-05, 13:27 | Report

OK, New Version in extras - devel!!

Lots and lots of new goodies today.
There will be another version tonight as well, but off for a swim first

MohammadAG | # 394 | 2010-04-05, 17:00 | Report

Not sure about it, you can try though

user ALL = NOPASSWD: /usr/bin/apt-get
Put it in healthcheck.sudoers in /etc/sudoers.d/ and update-sudoers.

noobmonkey | # 395 | 2010-04-05, 18:53 | Report

Thanks Mohammad

- very helpful.
It's on my todo list

Right huge update today with lots of new things So here is what is currently displayed!
Version 0.7.3-1 - Extras devel

System Tab

Accelerometer data
App/Home % Used
App/Home MB Free
Backlight Level
Backlight Max Level
Battery Charge + Status
Battery current mAh
Battery last charge mAh
Boot Count
Boot Reason
Current CPU Frequency
CPU temp (c)
Camera Shutter State
FM Transmitter Strength
Firmware Version + Readable name (ie PR1.1.1)
Headphone state
Kernel Core info
Keyboard Slider State
Memory Card (MMC) % Used
Memory Card (MMC) MB Free
MyDocs % Used
MyDocs Card MB Free
N900 Board info
N900 Board Revision
Processor Information
Proximity Sensor State
Rootfs % Used
Rootfs MB Free
System Locale
System Uptime

Comms Tab

Cell ID
Cell RNC
Cell Services
Cell Status
Device Hostname
Device IMEI
GPS Position (lat/long - quickfix)
Internal IP Address
MAC Address
Phone Signal
WIFI Link Quality
WIFI Noise
WIFI RSSI

Apps Tab

Lists all apps + Libs installed - doesn't do much else at present

Tools Tab

Test Sound - dropdown list of sound files on your device
Test LEDs - dropdown list of some patterns on your device
Test Vibrate - dropdown list of some patterns on your device
Accuracy Test - Confirms keys work, confirms accuracy of the pointer + confirm screen touch works all over
Dead Pixel Test - allows you to test multiple colours @ Full screen - Mix and match from RGB
Camera Tests - Front and back Cam Tests - Back cam will detect shutter status first, and ask you to open it, if it is not open.
System Reboot - Reboots the device.

Ok so in my todo's there are things like....

Tools
Update all apps (possibly dangerous)
Clean cache and run autoremove etc.......
3D test of some sort

Information tabs
Anything else to add anyone?

Aesthetics -
Be able to click on information tabs for either more information or to set timed updates of information.
Make the whole thing look nicer........

Right....... done for now

- Enjoy, and as per usual i would appreciate any feedback you may have

The Following 2 Users Say Thank You to noobmonkey For This Useful Post:
casper27, MohammadAG

pabloniss | # 396 | 2010-04-05, 19:05 | Report

After the upgrade program will not run .. out of the application attempting to launch

The Following User Says Thank You to pabloniss For This Useful Post:
noobmonkey

noobmonkey | # 397 | 2010-04-05, 19:07 | Report

hmmmmm can you try running it from terminal please? - it should provide feedback as to where it is crashing

pabloniss | # 398 | 2010-04-05, 19:43 | Report

Originally Posted by noobmonkey View Post

hmmmmm can you try running it from terminal please? - it should provide feedback as to where it is crashing

yes, I tried .. sometimes starts and sometimes not .... it does not matter whether the x-term or manually

or runs in 5-10 minutes after turn on....

Last edited by pabloniss; 2010-04-05 at 20:15.

noobmonkey | # 399 | 2010-04-05, 20:37 | Report

[QUOTE=pabloniss;596736]yes, I tried .. sometimes starts and sometimes not .... it does not matter whether the x-term or manually

or runs in 5-10 minutes after turn on....

[/QUOTE

Thats really very random :|
The part of the code where the error messages seem to be appearing doesn't make a huge amount of sense....

Code:

try:
	import hildon
except:
	print "Unexpected error: Importing hildon"
	raise

Definitely no dbus calls that i can see.

Hoping someone has seen this before?

The load up time should be about 6-8 seconds now... - the only thing that could take a while is the gps, but it uses a quick fix...
Again, running it from terminal, should let you see what is taking a long time, if the dbus errors are intermittent........

legendsohai | # 400 | 2010-04-06, 00:10 | Report

hi guys, i have a problem to load up healthcheck. it went crashed straight away after i tapped on the icon.

sorry for my bad english, and hopes someone can help. thank you