mine was good at 1ghz...... put 1.1ghz and it freezes and switches off.....
im better off leaving it on 900/500dsp for a few days...
Same thing on Droid- 1.1ghz appears to be the ceiling of the 3430.
IMO, 800mhz is the best compromise, since significantly better performance than 600mhz and much less of a chance for device failure. Not to mention the 1320mah battery is challenged enough already
Titan Hello!
I would like to thank the excellent work of you here in the Community! congratulations for the dedication!
My problem is a Next. I wanted a Kernel From 950mhz-500DSP And 1000Mhz-500DSP to test, equal to that I picked up here http://www.farahfa.com/n900-custom-k...rnelslehto-oc/
Problem is that Ali has no Major 500Mhz 930mhz.
Can you help?
I want a kernel that I Place by Flash and Stay permanent
I do not want to configure the X-editor.
You could post so I can download? http://www.saunalahti.fi/crailt/ of these I can not use the link opens with various codes and I can not save.
as I wrote, only for kernels that have a 625 or 600 level a phone call will
reset the limit to 600MHz.
only this specific kernel by letho and my kernel are affected.
but qwerty12 seems to have found a workaround http://talk.maemo.org/showpost.php?p...postcount=1722
So, what would be the correct to happen when making a phone call?
Confused..sorry.
I've 900 Mhz lehto kernel, stock DSP.
It's bad what happens, not bad.. can anyone explain.
So, what would be the correct to happen when making a phone call?
Confused..sorry.
I've 900 Mhz lehto kernel, stock DSP.
It's bad what happens, not bad.. can anyone explain.
Thanks.
from what i can gather titans kernel, will reset after a phone call, back to 600 mhz, (so will need to be re-enabled after callls) it will also be maxed out on the mhz while in a call.
lethos kernel doesn't do this.
well, this is how i understand it, obviously there is an awful lot of infos in this thread and hard to get head round some of it! ;0)
No, Letho's kernels that don't have any frequency >= 600 available except the maximum one WILL max out during phone call (btw it seems to scale down during call)
Titan's one will stay at 600.
there no command to change dsp clock speed,
In titan's kernel it is at stock speed when the CPU clock is <=800Mhz and overclocked to 500Mhz when cpu clock is above 800Mhz.
