nightfire | # 3381 | 2010-04-30, 15:16 | Report

Oh - specifically the voltages?

See if the output matches the voltages requested in your kernel-load config file.

maykon-de-angra | # 3382 | 2010-04-30, 20:19 | Report

Hello Friends!

I'm using Maemo XLV Kernel 21.

I set my PMCONFIG 850MHz minimum, 1.15Ghz Maximum

This all works great!

So I have a problem when I received a call Minimo Back to 500Mhz

What should I do for this not to happen

what can I do to get clock set at 850Mhz - 1.15Ghz, even when receiving a phone call?

I care not what I'm doing is wrong! Can I burn my N900.
More is my will! Help me!

titan | # 3383 | 2010-05-01, 08:28 | Report

put your N900 into a microwave. It will erase the frequency and no longer go back to 500Mhz

(and please, please do not take this seriously!)

rpgAmazon | # 3384 | 2010-05-01, 08:41 | Report

You are a brave man boy... but you are not the first...
You MUST TRY a nice Psx4All long-day-play with these settings!
Unforgettable... believe me... still better: put 1.15min and 1.15 max... awesome experience!

jaeezzy | # 3385 | 2010-05-01, 10:35 | Report

hi just a quick one... I'm using titans maemo25 kernel the ideal one with the max freq to 900MHz. Now as the low freq is 500MHz and on top as I have avoided 250MHz what impact can it have for locking to 500MHz as the lowest most of the times?? and my apology if this been asked already. thanks

rickysio | # 3386 | 2010-05-01, 11:01 | Report

I need help with Beecon Widget to overclock.

I've tried the command listed on the wiki, but that doesn't work. So I replaced echo "" with sudo gainroot, still doesn't work. Any one can help? :X

ahmadamaj | # 3387 | 2010-05-01, 11:24 | Report

i dont think it has any negative impact as the 500mhz uses same (maye less) voltage than the 250mhz in the default kernel.

ahmadamaj | # 3388 | 2010-05-01, 12:16 | Report

i installed maemo25, after reboot i lost 10mb in rootfs. is that normal??

UNderworld | # 3389 | 2010-05-02, 13:08 | Report

i dont know whether its been discussed... i have maemo25, with ideal, but i set my min to 250.. but still after phone calls, it goes to 125 ( i tried everything but couldnt avoid the damn 125)..

now the interesting thing:

yesterday I thought to try something out with the battery, so I used the phone till the battery was dead, completely and it switched off by itself.
I was running on 500min and 900max at that time.. with widgets..

i took the battery off, left it a few hours, then put it back on, charged it completely, then turn the phone on..

it asked me to enter time and date again, then i noticed the phone was really slow, quick check and it was on 125min 600max...600 I guess is avoided, I normally use 599 when i need stock freq (satnav in sun)

rickysio | # 3390 | 2010-05-02, 13:09 | Report

Yes, it is.