Practical widget and works nicely with Pentax. Still it should be a bit bigger. I think it's great as widget - if I need more functionality I can use irreco.
Works with Panasonic HDC-SD200 video camera with attached conf file. May work also with other Panasonic video cameras. I tested only 'capture_still' for still image capturing; 'start/stop' for video recording and 'power' for toggling stand-by. Range was about 3 meters.
.................
# Please make this file available to others
# by sending it to <lirc@bartelmus.de>
#
# this config file was automatically generated
# using lirc-0.8.4a(default) on Sat May 15 20:21:57 2010
#
# contributed by
#
# brand: Panasonic N2QAEC000024
# model no. of remote control: N2QAEC000024
# devices being controlled by this remote: Panasonic HDC-SD200
#
begin remote
name N2QAEC000024
bits 24
flags SPACE_ENC
eps 30
aeps 100
header 3468 1731
one 446 1269
zero 446 424
ptrail 447
pre_data_bits 24
pre_data 0x40040E
gap 74451
toggle_bit_mask 0x0
begin codes
capture_still 0x14667C
T/+ 0x14465C
W/- 0x14C6DC
start/stop 0x143329
power 0x143C26
ext_display 0x14EAF0
date/time 0x14E6FC
search_back 0x14405A
play 0x14504A
search_forw 0x14C0DA
still_adv_back 0x14E0FA
pause 0x14607A
still_adv_forw 0x14F0EA
skip_back 0x149288
stop 0x14001A
skip_forw 0x145248
delete 0x140E14
menu 0x146A70
up 0x940B91
left 0x94CB51
right 0x944BD1
down 0x948B11
ok 0x141A00
end codes
The idea for this app is great but sadly it does not seem to support Canon's Wireless Delay, as pointed out earlier in the thread. Any plans on getting this included in future versions? I'd also like to see the remote flash as a feature, though that's a hack for now (and doesn't work for my PowerShot SX1 IS now, thanks to the WD instead of IR).
