pctek | # 461 | 2010-06-10, 00:18 | Report

bump help...

Sash | # 462 | 2010-06-10, 00:33 | Report

You need SSH into your N900 if you want to edit the files via your PC. Or you could do it through X-terminal: cd /home/user/.q3a/baseq3/ and then leafpad /home/user/.q3a/baseq3/q3config.cfg (or vi or other software you might have) to edit the files.

nax3000 | # 463 | 2010-06-10, 00:35 | Report

Okay my turn now: I have no idea how to enable autoaiming. Any help?
________
YAMAHA FZ6

---

Last edited by nax3000; 2011-03-18 at 13:12.

Sash | # 464 | 2010-06-10, 00:42 | Report

I don't have the game installed but going off f2thak's guide here http://talk.maemo.org/showpost.php?p...&postcount=377
you need to edit the file /home/user/baseq3/autoexec.cfg

kingoddball | # 465 | 2010-06-10, 01:09 | Report

You need to copy the .pak files to:

/home/user/.q3a/baseq
Works fine for me on PR1.2

cp /home/user/MyDocs/baseq* /home/user/.q3a/baseq will copy all yours PAK's over.

pctek | # 466 | 2010-06-10, 01:47 | Report

Awesome leafpad worked.

Now upon starting quake3 it asks for cd key this time i entered with no problems and went online to frag, but when I exit quake3 and went back it asks for cd key again does anyone know how to make it stick>?

Waynder | # 467 | 2010-06-13, 17:08 | Report

bought new n900 after i messed up screen on old one..


so im instaling q3 again...

but cant find ioquake!?!?

i checked that im looking in right repositorz.. but cant find it... was it removed or im an idiot?

sorcgsdf | # 468 | 2010-07-01, 18:37 | Report

Same problem...cant find it

Mr Bump | # 469 | 2010-07-02, 03:27 | Report

just wondering if anyone is having trouble with getting autoaim working?

ive added the line to autoexec.cfg

set aim 1

//set shoot 1

but it still doesnt seem to be working?

ive also disabled the accelerometer, which has disabled it, except the jump, even though ive put q3config.cfg

seta accel_jump "-1300"
seta accel_epsilon_x "9999"
seta accel_epsilon_y "9999"

any ideas? thanks guys.

F2thaK | # 470 | 2010-07-02, 05:18 | Report

DISABLE AUTOAIM:


in file /home/user/baseq3/autoexec.cfg

at the bottom, change the section shown below

set the numbers (default: 1) to 0 (zero)

Code:

set aim 0
//set shoot 0


---


DISABLE ACCELEROMETER:


in file /home/user/.q3a/baseq3/q3config.cfg

at the bottom, change the section shown below

set the numbers for both "seta accel_epsilon_#" (default: 100) to 9999 as shown:

(do the same with "seta accel_jump" to disable jump)

Code:

seta accel_jump "-1300"
seta accel_epsilon_x "9999"
seta accel_epsilon_y "9999"