Notices


Reply
Thread Tools
Posts: 557 | Thanked: 370 times | Joined on Apr 2010
#51
You don't want to use mine. My second controller is switched off (plugged=0) just copy the respective lines over for the joystick from the second controller.
 
Posts: 3,664 | Thanked: 1,529 times | Joined on Sep 2009 @ Hamilton, New Zealand
#52
$10 NZD here!
 
Posts: 298 | Thanked: 197 times | Joined on Dec 2009 @ Norway
#53
Originally Posted by IzzehO View Post
You don't want to use mine. My second controller is switched off (plugged=0) just copy the respective lines over for the joystick from the second controller.
I was aware of that, but i did get to know what i had done wrong. I hadc set the device to 0, where you had -2, and -2 works perfectly.
 
Posts: 458 | Thanked: 274 times | Joined on Mar 2010 @ Finland
#54
Originally Posted by IzzehO View Post
Ok firstly, try Mario Kart and Lylat Wars.. both should work perfectly. As I have said MULTIPLE times... you need to rename your roms as the emulator really doesn't like spaces or special characters in rom names. Second here is my blight_input.conf

http://www.mediafire.com/?lgfdjmmvnnh

The first controller is PS3 Sixaxis and second is keyboard input. Joystick is IJKL and C buttons are TFGH, L, A, B, R are ZXCV respectively.
I HAVE renamed my roms and that isn't helping at all. I renamed my Mario Kart 64 just k.n64 and even just k (without even the file extension) and it still gives me Segmentation fault. I have also tried removing my config-folder and re-creating it but it doesn't help either!
 
Posts: 557 | Thanked: 370 times | Joined on Apr 2010
#55
Originally Posted by MiK546 View Post
I HAVE renamed my roms and that isn't helping at all. I renamed my Mario Kart 64 just k.n64 and even just k (without even the file extension) and it still gives me Segmentation fault. I have also tried removing my config-folder and re-creating it but it doesn't help either!

Very odd. Try a fresh ROM from different location? Also reinstall the emu?
 
Posts: 150 | Thanked: 80 times | Joined on Dec 2009
#56
How did you get the D-pad working on your N900 keyboard? Mine works in the options of a game but as soon as a game loads the D-pad stops working.

I've tried fiddling with these lines on blight_input.conf file:
Code:
Y Axis=key( 105 , 107 )
X Axis=key( 106 , 108 )
Any help would be appreciated.
 
Posts: 458 | Thanked: 274 times | Joined on Mar 2010 @ Finland
#57
Originally Posted by Sash View Post
How did you get the D-pad working on your N900 keyboard? Mine works in the options of a game but as soon as a game loads the D-pad stops working.

I've tried fiddling with these lines on blight_input.conf file:
Code:
Y Axis=key( 105 , 107 )
X Axis=key( 106 , 108 )
Any help would be appreciated.
Try changing the 0 in device to -2.
 

The Following User Says Thank You to MiK546 For This Useful Post:
Posts: 557 | Thanked: 370 times | Joined on Apr 2010
#58
^ What he said. It's also worth pointing out the dpad and the Joystick are two different beasts. Generally the D-pad on a 64 controller will allow you to navigate menus... but it will not work in game, however a joystick will do both.

Make sure your map for the joystick is right and it isn't just the dpad on the controller your using.

Also, I'm considering making a new thread with a fully worked guide to get this to work. In the hopes to get more attention for the product. Does anyone agree with this... and if so can you give me some recommendations on what tweaks are needed for the guide on page 2?

FINALLY, I discovered today that Banjo Kazooie runs really well on this emulator... go try it out!
 

The Following 2 Users Say Thank You to IzzehO For This Useful Post:
Posts: 27 | Thanked: 0 times | Joined on Feb 2010 @ United States
#59
Originally Posted by IzzehO View Post
^ What he said. It's also worth pointing out the dpad and the Joystick are two different beasts. Generally the D-pad on a 64 controller will allow you to navigate menus... but it will not work in game, however a joystick will do both.

Make sure your map for the joystick is right and it isn't just the dpad on the controller your using.

Also, I'm considering making a new thread with a fully worked guide to get this to work. In the hopes to get more attention for the product. Does anyone agree with this... and if so can you give me some recommendations on what tweaks are needed for the guide on page 2?

FINALLY, I discovered today that Banjo Kazooie runs really well on this emulator... go try it out!
Sounds like a great idea. I suck at coding on the n900 but if someone were to write detailed instructions I'd absolutly love to try this emulator!!

At least whenever Nokia sends back my n900 after replacing the cracked display
 
Posts: 662 | Thanked: 653 times | Joined on Feb 2010
#60
Completed the first boss on Super Mario 64. This emulator definitely deserves more attention.
 
Reply

Thread Tools

 
Forum Jump


All times are GMT. The time now is 12:50.