ali-bjk | # 811 | 2010-07-27, 16:40 | Report

but how can i copy the files to the emmc?

pingu | # 812 | 2010-07-27, 21:35 | Report

I have a question regarding touch support in the bootmenu, when I turn on the n900 the bootmenu shall apear, can I select to boot to android/maemo by touching on the screen or I have to open the keyboard and use the d-pad?
Thanks!

boxkillor | # 813 | 2010-07-27, 23:47 | Report

okay found the easiest way to copy apks without the full knowledge of xterm, i know silly but who cares. first make sure ure running open ssh , then use the mount command from the topic nitdroid modding etc. directly from the first post (its the one where ext3 and so on is mentionend).got it? k proof it by opening the filemanager of meemo, there ull see the /and folder besides your sdcard and ur mass. great now open winscp, move to your root of ur storage until u see the and folder. go in! put ur apk now in there, this is basically the emmc of the android. now on ur n900 unmount the p2 with "umount /dev/mmcblk1p2" after that install ur apk in android with a filemanager (which u get free from the market.) hope that works for u, i did it that way and it worked at all perfectly great ;D

mornage | # 814 | 2010-07-28, 00:14 | Report

connect your phone to a pc in mass storage mode, drag the apk from your pc into the main folder. then using a file manager on NITDroid, select sd card (the emmc is mounted as an sd card in NITDroid) and you will see the apk to run it.

mornage | # 815 | 2010-07-28, 00:17 | Report

in order for the menu of multiboot to appear you need the keyboard open. you select an option with numbers.

somedude | # 816 | 2010-07-28, 00:24 | Report

I finally got till the android not the flying world version but the old one that had Final on it,
Cannot get pass the touch android because keep getting foreclose errors a lot of them and brings me back to the touch android. Have cleared reformatted card multiple times but same error and it doesnot even connect to the wifi which it had done long time ago.

qole | # 817 | 2010-07-28, 03:12 | Report

Thread made sticky at the request of dj_steve.

ericube | # 818 | 2010-07-28, 03:14 | Report

Everything was fine during installation, then I tried to boot up the new NITDroid, those command lines rolling pretty fast on the screen, then gave me a black screen with '_' on the top left, and the backlight of the keyboard didn't go off....

Any one has the same problem?

using 8GB SD card, not that 4GB they mentioned

somedude | # 819 | 2010-07-28, 03:29 | Report

I am still trying to find how to connect to my wifi which has only wep encryption, worked the first time before updating to th new one with 3dfx and I also get a lot of fore close errors



Great got it working now what I did was started from scratch again.
Followed the new 1st post of steve on his new thread and then immediately did the post 2 which included 3dgfx. everything works now and nomore forceclose errors

---

Last edited by somedude; 2010-07-28 at 03:42. Reason: update

Dany-69 | # 820 | 2010-07-28, 09:02 | Report

TO SOMEONE THAT HAD THE ERROR "text 2 screen..."
Close the back of the phone
I had the error without closing it ..

Guys... i got two big problem...
First...Multiboot menu appears ALWAYS, even with the keyboard closed... e this is very boring.
I thought it was an hardware problem... but with bootmenu-n900 that i had some hours ago... no problem like this
How can i solve it?

The second problem, that someone in the 80th page have already had (http://talk.maemo.org/showpost.php?p...&postcount=795), is about a big black screen with only a " _ " in the left above corner

I've ene tried the advise of cricker:

So haven't installed the pagkage nitdroid-kernel-2.6.28-05_final1_armel.deb ....
But not installing it ... the phone neither starts to load nitdroid...

EDIT: and watching the video of rusban down here.... i've noticed that my N900 doesn't show the small symbol under the Nokia logo... that sort of envelop... :/

---

Last edited by Dany-69; 2010-07-28 at 09:29.