sak500 | # 661 | 2010-08-09, 20:24 | Report

I installed NITDroid yesterday and after hooking up on my home wifi 8Mbps connection i was able to connect to register my gmail account and getinto Market place almost immediately. I have no issues browsing or d/l loads of stuff off, off market place.

However i tried the built in clock's alarm and there is no way i could switch it off so had to reboot. Is there a way to off it?

Also just an hour back added power.conf file with following settings and it's working in realtime speed. NO lag whatsoever. However it's still getting pretty warm and battery drains at alarming rate same as before o/cing.

# Automatic voltage scaling
scaling_governor ondemand
scaling_max_freq 1000000
scaling_min_freq 125000
avoid_frequencies 950000 900000 850000 805000 700000 600000 55000

I more thing, if i flash zimage 1000/500dsp kernel via PC to o/c the cpu in Maemo will it do anything to multiboot and cause problems in booting to NITDroid? Since i installed NIT, my maemo is now at default 600/250 instead of 1Ghz/500dsp.

---

Last edited by sak500; 2010-08-09 at 20:27.

Deaconclgi | # 662 | 2010-08-09, 20:39 | Report

When I updated to NITDroid the last time, it took about a minute or less. It wasn't instant but it wasn't too long to bother me. I haven't had many wifi issues as far as connection.

QUESTION: When I updated to the next release of NITDroid, will I lose all my data for my saved games? I am thinking yes, but I would rather ask and know for sure than to guess. If it is a yes, I may have to do the old, copy to pc, paste back into NITDroid once updated...

Thank you and your Team for all your efforts.

Vic_Mackey | # 663 | 2010-08-09, 20:50 | Report

Thank you Blues, but i'm not very handy with these procedures, usually I rely on guides made by experienced users than me ... i hope it will be possible to have a detailed guide on how to do!
It would be fantastic!

dj_steve | # 664 | 2010-08-09, 20:50 | Report

in theory just wiping the out everything EXCEPT the data folder on sd then extractign should work

DDRFAN | # 665 | 2010-08-09, 20:51 | Report

With the overclock, it was almost instant for me.

Nick502 | # 666 | 2010-08-09, 20:54 | Report

Steve, are you releasing new RootFS tonight ?

leetut | # 667 | 2010-08-09, 21:23 | Report

if i type mount /dev/mmcblk1p2 /and
into xterm it says :not found

says the same if i type : mount /dev/mmcblk1p2 /and

i then open winscp

and still cant find what im looking for

(thats why i avoid xterm at all costs!)

dj_steve | # 668 | 2010-08-09, 21:44 | Report

need to be in root xterm leetut

leetut | # 669 | 2010-08-09, 22:09 | Report

well that worked once, now it gives me
failed: No such file or directory

using the same command as above

dj_steve | # 670 | 2010-08-09, 22:12 | Report

try mkdir /and first

rootfs etc will be released tomorrow, have to get a kernel and multiboot version sorted too