Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45! - Page 49 - maemo.org

srikar | # 481 | 2010-09-29, 12:57 | Report

btw i tried apt-get update too...

bunanson | # 482 | 2010-10-01, 02:30 | Report

Hot from the press, e-yes just released voice input, http://forum.nitdroid.com/index.php?topic=459.0

Coupled with ColorNote (from android market), this can become a dictaphone with voice transcription, cool!

Using my heavy NorthCarolina accent, here is a 1st attempt:
"I m trying you are wonderful. Watkins you do, this is a dictation, using kala nope, if you can be trained. I m done with you, bye bye."

Corrected:
"I m trying. You are wonderful. What can you do? This is a dictation, using ColorNote, if you can be trained. I m am done with you, bye, bye." Over 90% accuracy, not bad.

pics, noted the icon microphone.

bun

Attached Images

Last edited by bunanson; 2010-10-01 at 04:10.

allnameswereout | # 483 | 2010-10-01, 03:14 | Report

bun can you change

Originally Posted by

4) wget [url]http://downloads.nitdroid.com/e-yes/NitDroid-0.0.8-Popov.tar.bz2, size: 72952474 bytes (~72Mb)
****NOTE: you do not type the [url] after wget

to (just copy/paste)

Originally Posted by

4) $ wget [noparse]http://downloads.nitdroid.com/e-yes/NitDroid-0.0.8-Popov.tar.bz2[/noparse]
size: 72952474 bytes (~72Mb)

Or something like that.

Thx hun.

Last edited by allnameswereout; 2010-10-01 at 03:17. Reason: dont parse the noparse :D

The Following User Says Thank You to allnameswereout For This Useful Post:
bunanson

crazycow | # 484 | 2010-10-03, 07:39 | Report

i get an error which says Root filesystem mmcblk0p2 not avalable
guru meditation #000 etc.

i installed it with the auto installer, it said in maemo it was successfully installed any ideas?

The Following User Says Thank You to crazycow For This Useful Post:
bunanson

jbw89 | # 485 | 2010-10-03, 11:04 | Report

dosent work anny more, after a lot of trouble i got it working, if i reboot or restart my n900 i can't choose between Android or Maemo, whats up with that?
Thanks

the first time (and only time) i got to choose witsh i wanted!

The Following User Says Thank You to jbw89 For This Useful Post:
bunanson

iceman600 | # 486 | 2010-10-05, 03:18 | Report

im having trouble installing nitdroid...
as expected it hangs on the formating stage so i have to do the manual partitioning...
but using the manual partition is giving me errors... its a dead end for me... need help... here is my error on manual partitioning...

Attached Images

The Following User Says Thank You to iceman600 For This Useful Post:
bunanson

somedude | # 487 | 2010-10-05, 03:39 | Report

Originally Posted by iceman600 View Post

im having trouble installing nitdroid...
as expected it hangs on the formating stage so i have to do the manual partitioning...
but using the manual partition is giving me errors... its a dead end for me... need help... here is my error on manual partitioning...

check your connectors on your memory card holder, and check if the battery cover is completly on.
also search for a thread if you have your cover on: magnetic strip missing from battery cover,
your results looks like your phone has not recognized there is a memory card installed yet.

The Following User Says Thank You to somedude For This Useful Post:
bunanson

bunanson | # 488 | 2010-10-05, 03:54 | Report

Originally Posted by iceman600 View Post

im having trouble installing nitdroid...
as expected it hangs on the formating stage so i have to do the manual partitioning...
but using the manual partition is giving me errors... its a dead end for me... need help... here is my error on manual partitioning...

The error message because mmcblk1p1 is NOT there, so either umount the whole sd card or just simply ignore the error message.
xterm
sudo gainroot
umount /media/mmc1 or just
ignore the umount command, continue with your partitioning. when done, reboot,

xterm
cat /proc/partitions

should show a mmcblk1p2 (ext3), if it is there, you are alright and proceed with installation

umount error message means a lot of things, most of time, just proceed will be fine. If they are serious, they will warm you the 2nd time, then you would have to think. 1st time umount error message are bogus mostly. Of course this is just a rule of thumb, dont take it as a bible

bun

Last edited by bunanson; 2010-10-05 at 04:06.

The Following User Says Thank You to bunanson For This Useful Post:
iceman600

iceman600 | # 489 | 2010-10-05, 03:57 | Report

Originally Posted by somedude View Post

check your connectors on your memory card holder, and check if the battery cover is completly on.
also search for a thread if you have your cover on: magnetic strip missing from battery cover,
your results looks like your phone has not recognized there is a memory card installed yet.

im running DCEW with my mmc monitored... the DCEW detecs my mmc... thats why im confused?

The Following User Says Thank You to iceman600 For This Useful Post:
bunanson

iceman600 | # 490 | 2010-10-05, 06:07 | Report

Originally Posted by bunanson View Post

The error message because mmcblk1p1 is NOT there, so either umount the whole sd card or just simply ignore the error message.
xterm
sudo gainroot
umount /media/mmc1 or just
ignore the umount command, continue with your partitioning. when done, reboot,

xterm
cat /proc/partitions

should show a mmcblk1p2 (ext3), if it is there, you are alright and proceed with installation

umount error message means a lot of things, most of time, just proceed will be fine. If they are serious, they will warm you the 2nd time, then you would have to think. 1st time umount error message are bogus mostly. Of course this is just a rule of thumb, dont take it as a bible

bun

awsome... installed!!!
i thought flash is working by default?
then why i cant play youtube videoes on the default youtube app?

The Following User Says Thank You to iceman600 For This Useful Post:
bunanson