- Installed PSFreedom
- Updated the psfreedom.ko file to this one LINK
- Shut off the PS3 by using the switch at the back.
- Connected the N900 to the PS3.
- Ran PSFreedom, clicked the Jailbreak Mode On button.
- Flipped the On switch at the back of the PS3.
- Pressed the power button and then immediately pressed the eject button.
- Heard 3 short beeps as the PS3 started to boot.
- Scratched head and looked at black screen.
Please help
EDIT:
Originally Posted by
[30203.603973] PSFreedom gadget: proc_payload_read (/proc/psfreedom/payload) called. count 3072.Offset 0x00000000 - 0x00000c00
[30203.604064] PSFreedom gadget: proc_payload_read (/proc/psfreedom/payload) called. count 1024.Offset 0x00000c00 - 0x00001000
[30203.604095] PSFreedom gadget: proc_payload_read (/proc/psfreedom/payload) called. count 288.Offset 0x00000ee0 - 0x00001000
[30203.604187] PSFreedom gadget: proc_payload_read (/proc/psfreedom/payload) called. count 3072.Offset 0x00000ee0 - 0x00001ae0
[30213.216125] PSFreedom gadget: unbind
[30220.821716] PSFreedom gadget: PS3 Jailbreak exploit, version: 1.0 - 29 August 2010
[30220.821746] PSFreedom gadget: Loading firmware 3.41
[30220.821746] PSFreedom gadget: Setting up descriptors for 3.41
[30220.821777] PSFreedom gadget: Loading default payload and shellcode for 3.41
[30220.821807] PSFreedom gadget: using musb_hdrc, EP IN ep2in
[30220.821838] PSFreedom gadget: using musb_hdrc, EP IN ep1in (0x81)
[30220.821838] PSFreedom gadget: using musb_hdrc, EP OUT ep2out (0x2)
[30220.821868] PSFreedom gadget: Got disconnected
[30220.822021] PSFreedom gadget: /proc/psfreedom/status created
[30220.822052] PSFreedom gadget: /proc/psfreedom/version created
[30220.822052] PSFreedom gadget: /proc/psfreedom/payload created
[30220.822082] PSFreedom gadget: /proc/psfreedom/shellcode created
[30220.822113] PSFreedom gadget: /proc/psfreedom/supported_firmwares created
[30220.822113] PSFreedom gadget: /proc/psfreedom/fw_version created
[30236.501586] PSFreedom gadget: high speed
[30240.214477] PSFreedom gadget: Enabled BULK OUT endpoint
[30240.214508] PSFreedom gadget: Enabled BULK IN endpoint
[30240.214538] PSFreedom gadget: high speed
Why is it going on about 3.41? I thought replacing the psfreedom.ko file with the PL3 one would allow it to work on 3.10
replace the older one
ive compiled this for powerkernel so you need a powerkernel to make this work
btw. theres a thanks button
I put it in /home/opt/psfreedom/modules/power40 and no luck, also tried just in modules and in psfreedom. Unfortunately none of these worked, they did not even show any messages at all when I clicked on "kernel messages".
I am for sure using the power kernel (I am overclocked), so that is not the issue.
