[ANNOUNCE] MediaBox Media Center 2010.06.26 is out for N900, N800, N810 - Page 57 - maemo.org

pycage | # 561 | 2010-11-07, 10:27 | Report

Originally Posted by mase View Post

I have tested the latest trunk. In camera pictures there are also shown all
podcast covers and some (not all) album covers.

Fixed.

Originally Posted by mase View Post

I think, the sleeptimer should be placed either on the shelf, or in the status
bar, not in the settings.

Technically it's a settings configurator, but from a user's point of view you're right.

Originally Posted by mase View Post

Did you remove phone behavior?

Nope, just forgot to check in the icon into SVN.

Fixed.

Originally Posted by mase View Post

Do you have a plan to implement a automatically go online function?

Yes, but not in the next release.

The Following User Says Thank You to pycage For This Useful Post:
Addison

yin67 | # 562 | 2010-11-07, 10:49 | Report

Originally Posted by pycage View Post

Try to resolve your package database mess with

Code:

apt-get install -f

It looks like you got some broken package or dependency conflicts in there.

Thanks for your quick answer.
I run the command and I get:

0 upgraded, 0 newly installed, 0 to remove and 6 not upgraded.

Then I run apt-get upgrade and I get:

The following packages have been kept back:
libreadline5 libsdl-mixer1.2 libsndfile1 libsoup2.4-1 readline-common x11-common

0 upgraded, 0 newly installed, 0 to remove and 6 not upgraded.

Edit: there is a conflict with gnome-python(2.18.0-2maemo6).

Last edited by yin67; 2010-11-07 at 16:12.

mase | # 563 | 2010-11-08, 14:43 | Report

@pycage
Did you change anything in the AVRCP code in the last trunk?
It doesn't work anymore.

pycage | # 564 | 2010-11-08, 16:43 | Report

Originally Posted by mase View Post

@pycage
Did you change anything in the AVRCP code in the last trunk?
It doesn't work anymore.

No, I haven't. Maybe it's time for a reboot?

Are there any error messages in the logging output?

mase | # 565 | 2010-11-08, 16:53 | Report

I don't know. I have already rebooted. I recognized it in the car today.
I will retry a cold startup.

jkq | # 566 | 2010-11-08, 17:52 | Report

Originally Posted by mase View Post

@pycage
Did you change anything in the AVRCP code in the last trunk?
It doesn't work anymore.

Try disconnecting and reconnecting? I've occasionally seen (on the built-in player too) that although the A2DP part works, the AVRCP side won't.

In general I've found that if I enable the BT on the N900 first, then connect manually (via the N900's menus) to the receiver, it will work. If I let it automatically reconnect, sometimes it works, sometimes it doesn't.

-jkq

mase | # 567 | 2010-11-08, 22:01 | Report

Tested the trunk. Skipping time is about 4 seconds.
I can see the progress indicator in the status bar during
this time. I think, this is ok.
The camera folder bug is fixed. Phone behavior is present
again. Also the call from gpodder with a closed mediabox
works now. Maybe it is time for a release, what do you think?
I did not test AVRCP yet, but I think, it must be a generic
connection problem. I will test it tomorrow.

The Following User Says Thank You to mase For This Useful Post:
pycage

dagee04 | # 568 | 2010-11-09, 04:18 | Report

Don't know if it's just me but the youtube segment is not working in my media player. Now everytime I perform a search it says "content not available". Don't know if it's due to the pr1.3 or not. I tried to check for information or maybe someone had said something similar but I couldn't. Help anyone?

pycage | # 569 | 2010-11-09, 05:04 | Report

Originally Posted by dagee04 View Post

Don't know if it's just me but the youtube segment is not working in my media player. Now everytime I perform a search it says "content not available". Don't know if it's due to the pr1.3 or not. I tried to check for information or maybe someone had said something similar but I couldn't. Help anyone?

Same here... YouTube must have changed something again.

EDIT: YouTube seems back to normal again. Works fine here.

Last edited by pycage; 2010-11-09 at 19:36.

yin67 | # 570 | 2010-11-09, 07:25 | Report

Originally Posted by yin67 View Post

Thanks for your quick answer.
I run the command and I get:

0 upgraded, 0 newly installed, 0 to remove and 6 not upgraded.

Then I run apt-get upgrade and I get:

The following packages have been kept back:
libreadline5 libsdl-mixer1.2 libsndfile1 libsoup2.4-1 readline-common x11-common

0 upgraded, 0 newly installed, 0 to remove and 6 not upgraded.

Edit: there is a conflict with gnome-python(2.18.0-2maemo6).

@Pycage
Is there a solution here? I'm a novice, please help.
What is this package? How can I know this? What is it related to? And why when I installed it before it closes alone?