xperto | # 1 | 2010-11-12, 13:53 | Report

Guys i just got an update for uboot 1.3 but aint able to update it as the package conflicts with Power Kernel.. Am un V45.. help will be appriciated

Thanks.

Netweaver | # 2 | 2010-11-12, 13:57 | Report

it's on purpose, stskeeps has just put in these new 'conflicts' to prevent crashes during boot when both installed. Power45 has ALREADY u-boot installed, so no need for the 'official PR1.3 kernel' version.

So no worries. Your life (and N900) is in the hands of titan now

SubCore | # 3 | 2010-11-12, 14:00 | Report

the first N900 officially saved from reboot-loop :P

jorgecallejas | # 4 | 2010-11-12, 14:07 | Report

Please help me .I do not what happen but a penguin show up while I was installing a full charged battery it do not time out, I can not turn off my n900 and if I remove the battery and reinstall it the penguin show up on power on.
How can go back to maemo , when I typed the command

run mmcboot it said wrong image format comand
ERROr : can not get kernel image

---

Last edited by jorgecallejas; 2010-11-12 at 14:33.

af7567 | # 5 | 2010-11-12, 14:13 | Report

What happens if you

run noloboot

?

jorgecallejas | # 6 | 2010-11-12, 15:02 | Report

I t said

getting NOLO supplied boot parameters and after all parameters are showed
MAP3 RX-51#run noloboot
Booting NOLO supplied kernel
## booting kernel from legacy imageat 80538d18
Image name:kernel-power
Image type:ARM LINUX kernel image(unconpressed) 1.7 MIB
Load address:80008000
Entry point: 80008000
Verifying Checksum...OK
Loading kernel image... OK
OK
Using existing atags at Ox80000100
Starting Kernel...

But nothing else the light keep white firm

CepiPerez | # 7 | 2010-11-12, 15:31 | Report

The easy way is flash the kernel using PR1.3 image

af7567 | # 8 | 2010-11-12, 16:24 | Report

It looks like the proper maemo kernel is getting loaded but failing after that. are you sure that when you installed the meego image you put it on your sdcard and not onto the internal phone memory?

jorgecallejas | # 9 | 2010-11-13, 02:03 | Report

This is the problem I never intalled the image, I do not how the U-boot was intalled ,I only want to get maemo back

kuin | # 10 | 2010-11-13, 22:12 | Report

I have the same problem jorgecallejas i only update the power kernel from the automatic updates in the extras devel repository and when i restart the n900 shows the same things to you, Cepiperez says flash the kernel using pr1.3 image, how can i do that?