No sound throughout the OS - Page 2 - maemo.org

mattbutsko | # 11 | 2010-11-12, 05:00 | Report

Yeah. Here's a funny thing. I'm on linux now, during my reboot (windows to ubuntu) II heard one of the system sounds kick in. So here's what I troubleshooted to rectify the issue, I did all four of these in no particular order.

1 apt-get install --reinstall gstreamer0.10-plugins-base
2 apt-get install --reinstall gstreamer0.10-plugins-good
3 sudo su > pulseaudio
Got a lotta bad information and errors
4 sudo su > pulseaudio --system
Same thing, lotta errors

System sounds came on, call audio works, and music plays.

The Following User Says Thank You to mattbutsko For This Useful Post:
shallimus

shazosbourne | # 12 | 2010-11-12, 11:41 | Report

My audio was working again but just randomly shut down.
So mine obviously isn't fixed will try suggestions here.

kureyon | # 13 | 2010-11-12, 16:38 | Report

Don't know why, but all of a sudden I have no audio, pulseaudio is not started and when booting there is no boot video because the sound system is borked.

As far as I can determine it started to stop working after installing power kernel v45. However now even when reflashing back to default PR1.3 kernel pulseaudio does not start up.

Here's what happens when I start it after booting:

Code:

[1|root@Nokia-N900|~]start pulseaudio
pulseaudio (start) waiting
pulseaudio (stop) starting
pulseaudio (stop) starting
pulseaudio (stop) waiting
start: pulseaudio respawning too fast, stopped

If I keep repeating it then after a while it manages to start and I have sound again:

Code:

[1|root@Nokia-N900|~]start pulseaudio
pulseaudio (start) waiting
pulseaudio (start) starting
pulseaudio (start) pre-start, process 2181
pulseaudio (start) spawned, process 2186
pulseaudio (start) post-start, process 2187
        main process 2186
pulseaudio (start) running, process 2186

mattbutsko | # 14 | 2010-11-12, 21:33 | Report

I can confirm this issue can happen without installing power kernel (although the power kernel does seem to be affecting people). I was running the stock kernel when this happened to me the first time, my only answer was to reflash.

shazosbourne | # 15 | 2010-11-12, 22:28 | Report

I updated titans from 40 to 42 and that has got me my sound back for the time being.

mattbutsko | # 16 | 2010-11-12, 22:49 | Report

It happened again, this time however, SavageD's suggestion of "start pulseaudio" as root in the terminal worked. It didn't work last night, but it did now. Wonder why pulseaudio keeps killing itself.

[OM] | # 17 | 2010-11-13, 09:31 | Report

it happend to me after update kernel-power yesterday to v45
after that i updated kenerl-power-bootimg and multiboot-kernel-power

now i have no sound when i boot with kernel-power

BUT

when i boot in standard kernel (option 1 on multiboot) the sound is working right from the start.

so this is to me the power-kernel that is causing this error

i have tried "start pulseaudio" after booting to the power-kernel, that worked ONE time, after reboot the command wont work again.

please help

atilla | # 18 | 2010-11-13, 18:26 | Report

have the same problem.
start pulseaudio worked for me but i don't know for how long

silbah | # 19 | 2010-11-14, 13:02 | Report

Hi,

I'm having the same problem: most of the times the phone boots and pulseaudio doesn't start. No sound, no ringtone, no sound during calls. This is a very serious situation, in my opinion.
I'm surprised that this thread isn't getting any attention.

For me, this started after updating to power kernel .45 but coincidently (or not) when I tried booting meego from the memory card (which I was unable to do in case you're wondering)

Now, every time I boot the phone I check if sound is working (try to increase or decrease volume and see if the volume bar is shown). If it doesn't I have to go into x-term and use

sudo gainroot
start pulseaudio

And usually I need to run the 'start pulseaudio' command a few times before it actually starts. When it doesn't start, it says 'respawning too fast' or something like that...

I would honestly like to know if this a general problem or only a very few of us are suffering of this.
For me it's really annoying because my N900 is my business phone and I have lost a couple of calls already due to this.

Hopefuly pulseaudio keeps running and doesn't fail all of a sudden during the day.

Any help or suggestion to what's causing this is welcome.
My guess would be power kernel .45.

silbah

nicolai | # 20 | 2010-11-14, 13:16 | Report

Happens to me too. It started since I updated to PR 1.3 (OTA).
I never used power kernel.

I have to reboot two or three times until the
sound works.

nicolai