bivrat | # 1 | 2010-12-17, 17:49 | Report

some times hang my phone........ after restarting my phone or switch off nd on again show this message


"an unexpected reboot occurred. your custom setting were not loaded" on my nokia n900

so any one tell me how can i solve it..............


pls help me............

HellFlyer | # 2 | 2010-12-17, 17:51 | Report

You probably overclocked to unacceptably high values and phone crashes , try to lower overclock or increase voltage

bivrat | # 3 | 2010-12-17, 17:55 | Report

so how to do tht..................

cause my default overclock is set now........... if there any solution pls tell meeee..........

HellFlyer | # 4 | 2010-12-17, 18:00 | Report

Please no more dots , its hard to read


What do you mean "my default overclock is set now" ??? Power kernel has protection against wrong overclock after restart it gets back to default settings , did you overclocked with another program?

bivrat | # 5 | 2010-12-17, 18:04 | Report

ok tell me 1st how can solve it

pls help

HellFlyer | # 6 | 2010-12-17, 18:09 | Report

I already told you , you didnt answer my questions

You should read before overclocking

http://talk.maemo.org/showpost.php?p...&postcount=774

sutaburosu | # 7 | 2010-12-17, 18:15 | Report

Reading the documentation would also have pointed you in the right direction.

FRuMMaGe | # 8 | 2010-12-17, 18:15 | Report

As far as I can gather from my own experience, all this means is that your phone was not shutdown properly, so to ensure it was not caused by the overclock it reverts to stock settings.

Simply reboot again properly to return be able to overclock again

bivrat | # 9 | 2010-12-17, 18:21 | Report

yaa i overclocking my phone
after reseting
but now i m using default overclocking i mean default kernel.

another thing i m using kernel v2.6.28.10 power46

after this kernel using i m facing this problem........

so can pls give me solution

tzsm98 | # 10 | 2010-12-17, 18:22 | Report

1- Locate x-term in your applications
2- Open X-term
3- sudo gainroot (enter)
4- kernel-config ideal (enter)
5- kernel-config limits 250 805 (enter)
6- exit x-term

This will load the ideal profile and set a lower limit of 250MHz and an upper limit of 805MHz, which should work well for many N900. I believe the Palm Pre, similar processor, is shipped at 805 MHz.