Yabba | # 81 | 2010-12-27, 12:25 | Report

Sorry that this ansvering is taking time, which I don't currently have a lot

There may have, but that is not in my current priority list. But maybe in the future.

Yes, I can include it, and I will do that as soon as I find enough time to do that (hopefully in next few weeks).

fabiomanzoni | # 82 | 2011-01-10, 01:58 | Report

Any news on Sony profiles? (I have a Sony Alpha 330 too )

mdziaf | # 83 | 2011-01-10, 02:37 | Report

Hi there all first time poster...

I too would like to see sony profiles to be included in this software I'm using an Alpha 500 (it should be the same profile with A330s right?), and wouldnt mind testing it if needed too

Yabba | # 84 | 2011-01-14, 11:27 | Report

Hello, sorry to take time to ansver again

About the time tables for Sony (With Minolta RC) is that I will try to finnish that this weekend so hopefully new version is out at the end of this week, or at the beginning of next.

Thank you for your patiense.

lennartb | # 85 | 2011-01-14, 15:07 | Report

http://www.flickr.com/photos/lennartbnl/5351789915/

I took this photo with pyKake, can't live without my pyKake!

Is it maybe possible to be able to set timed photo intervals to seconds with decimals? Like 9.55 seconds? I was trying to exactly time something and 10 seconds was too slow, and 9 seconds was too fast.

cincibluer6 | # 86 | 2011-01-14, 21:55 | Report

Need help here..
I've never been able to get this to work with my XSi for some reason. I came back to it, tried it and it didn't work. I am pointing the IR sensor of the N900 to the camera one from about 2 inches away and nothing.
I turned off the camera, back on- no change.
Removed and reinstalled pykake- no change.
Am I doing something wrong here? Am I missing some kind of setting that needs to be enabled?

lennartb | # 87 | 2011-01-15, 11:34 | Report

Yup you missed a setting on the camera
You need to put your camera in the 'Self Timer/Remote' (Is that the right word?) setting.

cincibluer6 | # 88 | 2011-01-15, 17:12 | Report

Doh!

Here I am going through the menu looking for anything but couldn't find it.
Thanks for the help. Going to give it a shot now.

Yabba | # 89 | 2011-01-15, 17:24 | Report

Hello! This time I bring some good news The pyKake 0.7.3 is kicked to the autobuilder, and it includes support for Minolta and Sony (I couldn't test that by myself, but I assume that here is lot of avid testers to do that). So, I will say, that Sony (Alphas) should be supported now (as long as they really work with Minolta RC3) - And of course, Minolta is supported too, cause it is Minoltas remote file.

So, without longer speaks, Feel free to test* the version 0.7.3 is in extras-devel (or should be as soon as it goes trought the autobuilder)!

And I wish you will send the results here.

*) At your own risk of course, it is in devel after all, and there may be some bugs I haven't noticed (but that is non likely because changes for the version 0.7.2 were only few added lines of code and couple of commented prints).

Yabba | # 90 | 2011-01-15, 19:11 | Report

Ok, like usually with the first build... there was some bugs (this time they were harmless, but pretty stupid) which caused some problems, but those are fixed now. Build 0.7.3-2 is in the autobuilder.