Page 2 of 2 1 2
Reply
Thread Tools
ggroen is offline ggroen
2010-10-29 , 19:53
Posts: 117 | Thanked: 23 times | Joined on Aug 2008 @ Hardenberg
#11
I need help here!
I had kernel power settings vs 28 and kernel power settings running in 1.2
I loaded PR1.3 OTA.
It says on uname -r? 2.6.28-omap1

I don't how to get kernel power settings to load ideal etc. I think something is very? wrong here?
I used 'apt-get install --reinstall kernel-power-modules kernel-power-flasher
Then is says I allready have the newest version. What to do next? All commands I used before seem to fail. I 've seen messages on archives, not being in sudo file, I'm confused.
Last edited by ggroen; 2010-10-29 at 19:56.
 
atilla's Avatar
atilla is offline atilla
2010-10-29 , 19:55
Posts: 1,210 | Thanked: 597 times | Joined on Apr 2010 @ hamburg,germany
#12
pointless thread ever.
overclocking is as easy like it always was.
and there are 100 better tutorials for overclocking.
it has nothing to do with pr1.3.
and there is no need for cpufreq
and that it doesn't work with nitdroid is super crap too.
__________________


Nobody likes us but we dont care....
Last edited by atilla; 2010-10-29 at 20:08.
 

The Following 2 Users Say Thank You to atilla For This Useful Post:
AMLJ's Avatar
AMLJ is offline AMLJ
2010-10-29 , 19:58
Posts: 226 | Thanked: 59 times | Joined on Sep 2010 @ Mierlo, Netherlands
#13
See this
After you install NITDroid, you should do some things to get kernel power to work.
__________________
AMLJ**0-1-47
 
cheve is offline cheve
2010-10-29 , 21:20
Posts: 362 | Thanked: 143 times | Joined on Mar 2008
#14
Originally Posted by ggroen View Post
I need help here!
I had kernel power settings vs 28 and kernel power settings running in 1.2
I loaded PR1.3 OTA.
It says on uname -r? 2.6.28-omap1

I don't how to get kernel power settings to load ideal etc. I think something is very? wrong here?
I used 'apt-get install --reinstall kernel-power-modules kernel-power-flasher
Then is says I allready have the newest version. What to do next? All commands I used before seem to fail. I 've seen messages on archives, not being in sudo file, I'm confused.
http://talk.maemo.org/showpost.php?p=852499&postcount=8 suggested that a reload of the kernel is needed. May be try to un-install the kernel and then re-install it.

good luck
 
ggroen is offline ggroen
2010-10-30 , 16:45
Posts: 117 | Thanked: 23 times | Joined on Aug 2008 @ Hardenberg
#15
Originally Posted by cheve View Post
http://talk.maemo.org/showpost.php?p=852499&postcount=8 suggested that a reload of the kernel is needed. May be try to un-install the kernel and then re-install it.

good luck
Ok, I succeeded to reinstall the kernel this time, maybe less trafic on the site?

My 'old' commands starting with /usr/sbin/kernel-load and /usr/share/ k-p-s/ideal did not work anymore but:

kernel-config load ideal
kernel-config limits 500 900

Worked fine! I'm on th road again, thanks!
 
crxtodd16 is offline crxtodd16
2010-10-31 , 23:43
Posts: 13 | Thanked: 4 times | Joined on Feb 2010
#16
Careful about using kernel-power, just found out that using it on PR 1.3 potentially has a negative effect on Joikuspot (ie it doesn't work). Or perhaps it's just my phone.

Check out the related thread, if you'd like: http://talk.maemo.org/showthread.php?t=64807
 
royalbindal is offline royalbindal
2011-01-13 , 10:39
Posts: 1 | Thanked: 0 times | Joined on Dec 2010
#17
hii,,
i hav made my phone reset from nokia care and hav also updated it to pr 1.3, bt after tht master reset i am unable to install enhanced linux kerel, it shows an error conflicting application package kernel-module-maemo.....
and i too want to install nitdroid.. wht to do...????
plz help....
 
n900 lover is offline n900 lover
2011-01-15 , 22:13
Posts: 247 | Thanked: 67 times | Joined on May 2010 @ limassol cyprus
#18
just used the instructions on overclocking, and it works fine, can overclock to 1150mhz....i say good job and thanks for the help!.
 
rmlifted is offline rmlifted
2011-03-12 , 17:59
Posts: 2 | Thanked: 0 times | Joined on Mar 2011
#19
Originally Posted by n900 lover View Post
just used the instructions on overclocking, and it works fine, can overclock to 1150mhz....i say good job and thanks for the help!.
Hi N900 lover, pls i hope you can help me here: i am unable to install the ''enhanced linux kernel for power users'' it used to say: unable to install.....conflicting package. i am new to all these but really not happy how my battery ends up after few hours. i can see you are online now pls help. thanks
 
rmlifted is offline rmlifted
2011-03-14 , 23:51
Posts: 2 | Thanked: 0 times | Joined on Mar 2011
#20
I have the same problem with you,..........unable to install enhanced linux kernel for power users 'conflicting package.... i need help, pls someone help,
 
Reply
Page 2 of 2 1 2

« Previous Thread | Next Thread »

 
Forum Jump


All times are GMT. The time now is 12:41.

Contact Us - Home - Archive - Top