[Maemo 5] FAS (FRuMMaGe Aircrack Script) - Page 6 - maemo.org

Haider | # 51 | 2011-01-21, 12:07 | Report

How to install it. When I type the first command it says cannot create mkdir. Can you explain it. I am a nooby.

FRuMMaGe | # 52 | 2011-01-21, 12:48 | Report

Originally Posted by angelbratz View Post

Successfully obtained my WEP...

Now learning how to Bruteforce WPA/WPA2...

Huhuhuhuhu.....Keep up the Excellent work...

Thank youuuuu....^.^

Just to verify my steps for bruteforcing my WPA/WPA2...

sh fas.sh

i choose 3 (load)
Then 1 (Enable)
Then 2 (Scan Ap)
Then 4 (brutefoce)
Then 3 Choose Dictionary
Then i enter (test.txt)
Then I choose 2 (Specify Cap)
Then it open a New Window and close it immediately...
It brings me back to the mainmenu.. (1-5)

There is no option to inject or authenticate with client like cracking the WEP...

Did i miss something here?

^.^""

Sorry...

Also...during Deauthentication...

I should enter

(AP MAC) (MYPC MAC) INTERFACE (wlan0)

Right?

WPA is a bit different. Once you have the airodump window open you have 2 options.

1. Wait for a client to authenticate with the AP.

2. If a client is already authenticated, use the deauthenticate option to force them to disconnect/reconnect with the AP.

When this has happened, you will get a message in the top right of the airodump window saying "WPA Handshake". And now you can bruteforce the cap file

The deauthenticate command syntax is:
AP MAC, Client, Interface, Number of Deauths

So it would be:
(AP Mac address) (Already connected client mac) wlan0 (Number of times to send deauth packet)

Originally Posted by Haider View Post

How to install it. When I type the first command it says cannot create mkdir. Can you explain it. I am a nooby.

Make sure you follow this code EXACTLY.

Code:

mkdir /home/user/MyDocs/FAS/
cd /home/user/MyDocs/FAS/
mkdir cap
mkdir diction
mkdir keys
tar -xzvf /home/user/MyDocs/fas.tar.gz .

Post back your results if you get the same error

Last edited by FRuMMaGe; 2011-01-21 at 12:56.

The Following User Says Thank You to FRuMMaGe For This Useful Post:
angelbratz

angelbratz | # 53 | 2011-01-21, 13:06 | Report

Owh...

I get it now...So means after i select which AP to crack and after i input the:

(Ch) (Ap Mac) (filename)

I just wait or De-authenticate...correct?

So once i i see the handshake...Then i can start bruteforcing it...

ill test it right away...hehehe...

Update:
I just tested disconnecting and reconnecting my lappie...i somehow do not see the handshake notification...btw my router now using wpa/wpa2.

oh yea...and the Mac to deauthenticate...the connected mac is at the bottom of the screen rite?

Thank you...

as for the cannot mkdir..is the folder already there??? I think i got the same error last time....but at the end i check my folder..its already created...Try check if the folder is already created or not...

Instead of creating the folder from X-term you can also manually create it at the file manager right?

Last edited by angelbratz; 2011-01-21 at 13:42.

FRuMMaGe | # 54 | 2011-01-21, 13:43 | Report

Originally Posted by angelbratz View Post

I get it now...So means after i select which AP to crack and after i input the:

(Ch) (Ap Mac) (filename)

I just wait or De-authenticate...correct?

So once i i see the handshake...Then i can start bruteforcing it...

ill test it right away...hehehe...

oh yea...and the Mac to deauthenticate...the connected mac is at the bottom of the screen rite?

Correct

Originally Posted by angelbratz View Post

as for the cannot mkdir..is the folder already there??? I think i got the same error last time....but at the end i check my folder..its already created...Try check if the folder is already created or not...

Instead of creating the folder from X-term you can also manually create it at the file manager right?

You can make the folders with file manager, but I prefer the xterm version. If you follow the commands exactly there should not be a problem.

I have a nice queen beecon widget on my desktop for launching the script

The Following User Says Thank You to FRuMMaGe For This Useful Post:
angelbratz

angelbratz | # 55 | 2011-01-21, 13:53 | Report

I suck at queenbeecon script....hahahai mainly rely on the beecon exports...Hehehehe....

I did my testing....could not see the handshake notification...or am i looking at the correct window?

FRuMMaGe | # 56 | 2011-01-21, 14:14 | Report

Originally Posted by angelbratz View Post

I suck at queenbeecon script....hahahai mainly rely on the beecon exports...Hehehehe....

I did my testing....could not see the handshake notification...or am i looking at the correct window?

If your font is any bigger than size 10 then you wont see it. Press Ctrl+Shift+P to take a screenshot and post it here

angelbratz | # 57 | 2011-01-21, 14:32 | Report

Here is my Screenshot...can i know where its gonna appear?

and when i try to bruteforce the cap...it says (0 Handshake)

then it auto close the terminal...

Last edited by angelbratz; 2011-01-21 at 14:35.

FRuMMaGe | # 58 | 2011-01-21, 14:38 | Report

Originally Posted by angelbratz View Post

Here is my Screenshot...can i know where its gonna appear?

and when i try to bruteforce the cap...it says (0 Handshake)

then it auto close the terminal...

It will appear to the right of the date and time. I'll test when I get home

The Following User Says Thank You to FRuMMaGe For This Useful Post:
angelbratz

angelbratz | # 59 | 2011-01-21, 14:48 | Report

Ohhh... i see...hmmm...maybe i missed a step somewhere...but i dont think so....lemme racall it...

1. Enter WPA Mode
2. Load Injection Driver
3. Enter Monitor Mode
4. Scan AP
5. Enter Ap Channel, Mac and Filename
6. Wait for it to handshake...(this where i waited and tested for 1 hour) Also sucessfully deauthenthicate my lappie...but i still dont see the handshake notification)
7. Select bruteforce
8. Enter Dictionary File
9. Select Cap (then the status is reading the cap files, while there is a Status (0 Handshake)
10. Throw me out at the WPA menu again...

@.@""

Thanks for all the tutorial and help....really appreciate it.... achieved something new, at least success on the WEP...now the WPA/WPA2 only...

oh yea...if you're free...can include the Widget as well on the mainpage?

^.^

FRuMMaGe | # 60 | 2011-01-21, 15:06 | Report

Originally Posted by angelbratz View Post

Ohhh... i see...hmmm...maybe i missed a step somewhere...but i dont think so....lemme racall it...

1. Enter WPA Mode
2. Load Injection Driver
3. Enter Monitor Mode
4. Scan AP
5. Enter Ap Channel, Mac and Filename
6. Wait for it to handshake...(this where i waited and tested for 1 hour) Also sucessfully deauthenthicate my lappie...but i still dont see the handshake notification)
7. Select bruteforce
8. Enter Dictionary File
9. Select Cap (then the status is reading the cap files, while there is a Status (0 Handshake)
10. Throw me out at the WPA menu again...

@.@""

Thanks for all the tutorial and help....really appreciate it.... achieved something new, at least success on the WEP...now the WPA/WPA2 only...

oh yea...if you're free...can include the Widget as well on the mainpage?

^.^

Those commands are correct. I'll test when I get home. For the widget, open a new beecon widget and click the "advanced" button, then scroll down to the bottom text box and paste the following code:

Code:

[queen-beecon-header]
version=1.000000
checksum=2788276
[queen-beecon-exported-instance]
widgetType=1
widgetVisible=1
operationalStatus=0
hideCanvas=false
hideClickCanvas=false
snippetBgRGB=0
snippetExtBgRGB=#627500000000
beecon_lt0_ImgZoom=0
beecon_lt0_BgRGB=2
beecon_lt0_ExtBgRGB=#64a500000000
beecon_lt0_ImgFilename=queen-beecon-appok.png
beecon_eq0_ImgZoom=0
beecon_eq0_BgRGB=3
beecon_eq0_ExtBgRGB=#65bd00000000
beecon_eq0_ImgFilename=queen-beecon-appok.png
beecon_eq1_ImgZoom=0
beecon_eq1_BgRGB=4
beecon_eq1_ExtBgRGB=#ffffffff0000
beecon_eq1_ImgFilename=queen-beecon-appwrn.png
beecon_ge2_ImgZoom=0
beecon_ge2_BgRGB=5
beecon_ge2_ExtBgRGB=#ffff00000000
beecon_ge2_ImgFilename=queen-beecon-apperr.png
beecon_idxge2_ImgZoom=0
beecon_idxge2_BgRGB=11
beecon_idxge2_ExtBgRGB=#0000ffffffff
beecon_idxge2_ImgFilename=queen-beecon-index.png
widWidth=147.70642201834863
widHeight=64.264705882352942
instanceTitle=Aircrack
instanceCmd=osso-xterm -e "sh /home/user/MyDocs/FAS/fas.sh"
rememberMe=
cmdImgFilename=queen-beecon-appok.png
cmdImgAngle=0
cmdImgZoom=11
cmdFgRGB=1
cmdExtFgRGB=#ffffffffffff
cmdTextAngle=0
cmdVisibilityPosition=5
cmdImgVisibilityPosition=5
cmdJustify=0
cmdExtFont=Nokia Sans bold italic 18
cmdFontName=3
cmdFontSize=12
resImgFilename=queen-beecon-appok.png
resImgAngle=0
resImgZoom=0
resFgRGB=1
resExtFgRGB=#ffffffffffff
resTextAngle=0
resVisibilityPosition=0
resImgVisibilityPosition=5
resJustify=0
resExtFont=Nokia Sans bold 12
resFontName=2
resFontSize=12
progressAnimationFrames=4
progressAnimationTimer=0
progressAnimationPos=4
progressAnimationAtClickXY=false
progressAnimationBasename=queen-beecon-progress
updOnStartup=false
updOnClick=true
updOnDesktop=false
updOnSight=false
delayIndex=0
customIntervalSecs=0
updNeworkPolicy=0
updOnDBUS=0
updOnDBUSBus=0
updOnDBUSMatchRule=

Then click the "import buffer to beecon" button.

The Following User Says Thank You to FRuMMaGe For This Useful Post:
angelbratz