eefo | # 131 | 2011-01-26, 11:10 | Report

well , i have the worst experience ever related to usb hostmode
flashed my emmc just cause of kernel
and still i wanted to use this mode but afraid of installed kernel again
any tip for me ?

cheve | # 132 | 2011-01-26, 14:44 | Report

@Boemien, I don't know the answer, but just thinking out loud here....currently, what exactly do you do to key in the ID and password? Do you do it by pointing your web browser to a local address(eg. http://192.x.x.x)? If so, then I think as long as you get your USB-ethernet up; then I see no reason why you wouldn't browser to the same local address to give the ID and password. However, if the interface to supply those info is thru a special application; then i think it is much more difficult. You may have to contact the manufacturer, if possible, for info.

good luck

cheve | # 133 | 2011-01-26, 14:59 | Report

@eefo, From reading your other posts and threads, I would advice you to slow down somewhat, take a 'breather' so to speak and do some reading. For what is worth, I have varies version of power kernels on my N900 and had not experienced issue that forces me to reflash. Now, it does not mean the power kernel is absolute perfect; but so far so good for my use case.

By the way, what do you mean by "the worst experience ever", when you have a chance, please provide detail steps of what you did/or attempted to do. With the details, folks round here may offer you educated suggestion. Please consider this: when you go to see a doctor, do you answer doctor that 'I am sick' to every questions that he ask you. Chances are that you would not.

Good luck,

istota | # 134 | 2011-01-26, 19:20 | Report

hi
I have the same problem. There is no dew/sr0, kernel messages ends
[74326.714263] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SE-T084M TD00 PQ: 0 ANSI: 0
and nothing else happens
In WHAT IS THE PROBLEM?

bastibasti | # 135 | 2011-01-31, 12:12 | Report

Maybe your bridge is not supported by the kernel?

sygys | # 136 | 2011-01-31, 12:14 | Report

i havent had any updates in some time now... are there still people working on USB host mode?

hellsing | # 137 | 2011-01-31, 14:43 | Report

Nobody?
i guess it's because my flash drive is in /dev/sda instead of /dev/sda1, but how can i solve that?

hotkolbas | # 138 | 2011-02-04, 12:16 | Report

after a bit of stuffing around and 4 mice and 2 keyboards i found my HP wireless mouse/keyboard set work great. the total mA rating is 100mA and both work very well with no lag/jitters.
i did have a problem with a usb hub, i can get it working BUT nothing off that can be mounted. maybe power issue maybe not.

pavi.kant | # 139 | 2011-02-06, 06:19 | Report

I am using PowerKernel v46 multibooted with Nitdroid Ginderbread and the omap pr1.3 Kernel i installed the h-e-n software and bought the female to female converter...i am trying to connect a transcend 4gb flash drive with fat32 file system.
I run the device at high speed. nothing happens. some times when i open file manager it says no filesystem found(this is a rarity... most of the times nothing happens at all).
can you suggest what might be going wrong?... any help will be appreciated...

My Kernel messages read:

[26428.858734] WARNING: at /home/builder2/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/musb/musb_host.c:128 musb_h_tx_flush_fifo+0x94/0xcc()
[26428.858795] Could not flush host TX0 fifo: csr: 000a
[26428.858825] Modules linked in: ipv6 pn_pep vfat fat sd_mod scsi_mod iphb rfcomm panic_info_buff sco l2cap ext3 jbd omaplfb pvrsrvkm bridgedriver g_file_storage uinput board_rx51_camera et8ek8 omap_previewer_hack omap34xxcam_mod isp_mod iovmm videobuf_dma_sg videobuf_core omap3_iommu iommu2 iommu dspbridge ssi_mcsaab_imp phonet cmt_speech joydev wl12xx smc91x mii omap_ssi nokia_av hci_h4p mac80211 crc7 tsc2005 bluetooth fmtx_si4713 smia_sensor ad5820 adp1653 rtc_twl4030 tsl2563 leds_twl4030_vibra lis302dl videodev v4l1_compat compat_ioctl32 rtc_core smiaregs v4l2_int_device ntfs nls_utf8 leds_lp5523 led_class mmc_block omap_hsmmc mmc_core twl4030_wdt omap_wdt
[26428.859405] [<c0030470>] (dump_stack+0x0/0x14) from [<c0057444>] (warn_slowpath+0x64/0x80)
[26428.859497] [<c00573e0>] (warn_slowpath+0x0/0x80) from [<c01e9a60>] (musb_h_tx_flush_fifo+0x94/0xcc)
[26428.859558] r3:00000000 r2:c0349b67
[26428.859588] r6:d80ab100 r5:0000000a r4:0000000a
[26428.859649] [<c01e99cc>] (musb_h_tx_flush_fifo+0x0/0xcc) from [<c01ea930>] (musb_cleanup_urb+0xc0/0x10c)
[26428.859710] [<c01ea870>] (musb_cleanup_urb+0x0/0x10c) from [<c01eb134>] (musb_urb_dequeue+0x1dc/0x248)
[26428.859771] [<c01eaf58>] (musb_urb_dequeue+0x0/0x248) from [<c01cec9c>] (unlink1+0x108/0x114)
[26428.859863] [<c01ceb94>] (unlink1+0x0/0x114) from [<c01cfc38>] (usb_hcd_unlink_urb+0x9c/0xf8)
[26428.859924] [<c01cfb9c>] (usb_hcd_unlink_urb+0x0/0xf8) from [<c01d0af4>] (usb_kill_urb+0x84/0x14c)
[26428.860015] r7:c93afa80 r6:c93afa80 r5:cf0a6000 r4:00000000
[26428.860046] [<c01d0a70>] (usb_kill_urb+0x0/0x14c) from [<c01d1d78>] (usb_start_wait_urb+0x80/0x120)
[26428.860137] r6:00001388 r5:cf0a7e50 r4:00000000
[26428.860168] [<c01d1cf8>] (usb_start_wait_urb+0x0/0x120) from [<c01d1ff8>] (usb_control_msg+0xc4/0xe8)
[26428.860260] [<c01d1f34>] (usb_control_msg+0x0/0xe8) from [<c01cacec>] (hub_port_init+0x3d8/0x634)
[26428.860321] [<c01ca914>] (hub_port_init+0x0/0x634) from [<c01cc3e4>] (hub_events+0x86c/0xe64)
[26428.860412] [<c01cbb78>] (hub_events+0x0/0xe64) from [<c01ce034>] (hub_thread+0x30/0x19c)
[26428.860473] [<c01ce004>] (hub_thread+0x0/0x19c) from [<c006da90>] (kthread+0x54/0x80)
[26428.860534] r6:00000000 r5:c01ce004 r4:00000000
[26428.860565] [<c006da3c>] (kthread+0x0/0x80) from [<c005a950>] (do_exit+0x0/0x7bc)
[26428.860656] r5:00000000 r4:00000000
[26428.860687] ---[ end trace adbd6ed65c91e9be ]---
[26428.890655] usb 1-1: khubd timed out on ep0out len=0/0
[26435.101074] ------------[ cut here ]------------
[26435.101135] WARNING: at /home/builder2/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/musb/musb_host.c:128 musb_h_tx_flush_fifo+0x94/0xcc()
[26435.101196] Could not flush host TX0 fifo: csr: 000a
[26435.101226] Modules linked in: ipv6 pn_pep vfat fat sd_mod scsi_mod iphb rfcomm panic_info_buff sco l2cap ext3 jbd omaplfb pvrsrvkm bridgedriver g_file_storage uinput board_rx51_camera et8ek8 omap_previewer_hack omap34xxcam_mod isp_mod iovmm videobuf_dma_sg videobuf_core omap3_iommu iommu2 iommu dspbridge ssi_mcsaab_imp phonet cmt_speech joydev wl12xx smc91x mii omap_ssi nokia_av hci_h4p mac80211 crc7 tsc2005 bluetooth fmtx_si4713 smia_sensor ad5820 adp1653 rtc_twl4030 tsl2563 leds_twl4030_vibra lis302dl videodev v4l1_compat compat_ioctl32 rtc_core smiaregs v4l2_int_device ntfs nls_utf8 leds_lp5523 led_class mmc_block omap_hsmmc mmc_core twl4030_wdt omap_wdt
[26435.101806] [<c0030470>] (dump_stack+0x0/0x14) from [<c0057444>] (warn_slowpath+0x64/0x80)
[26435.101898] [<c00573e0>] (warn_slowpath+0x0/0x80) from [<c01e9a60>] (musb_h_tx_flush_fifo+0x94/0xcc)
[26435.101959] r3:00000000 r2:c0349b67
[26435.102020] r6:d80ab100 r5:0000000a r4:0000000a
[26435.102050] [<c01e99cc>] (musb_h_tx_flush_fifo+0x0/0xcc) from [<c01ea930>] (musb_cleanup_urb+0xc0/0x10c)
[26435.102111] [<c01ea870>] (musb_cleanup_urb+0x0/0x10c) from [<c01eb134>] (musb_urb_dequeue+0x1dc/0x248)
[26435.102203] [<c01eaf58>] (musb_urb_dequeue+0x0/0x248) from [<c01cec9c>] (unlink1+0x108/0x114)
[26435.102264] [<c01ceb94>] (unlink1+0x0/0x114) from [<c01cfc38>] (usb_hcd_unlink_urb+0x9c/0xf8)
[26435.102325] [<c01cfb9c>] (usb_hcd_unlink_urb+0x0/0xf8) from [<c01d0af4>] (usb_kill_urb+0x84/0x14c)
[26435.102416] r7:c93afa80 r6:c93afa80 r5:cf0a6000 r4:00000000
[26435.102478] [<c01d0a70>] (usb_kill_urb+0x0/0x14c) from [<c01d1d78>] (usb_start_wait_urb+0x80/0x120)
[26435.102539] r6:00001388 r5:cf0a7e50 r4:00000000
[26435.102600] [<c01d1cf8>] (usb_start_wait_urb+0x0/0x120) from [<c01d1ff8>] (usb_control_msg+0xc4/0xe8)
[26435.102661] [<c01d1f34>] (usb_control_msg+0x0/0xe8) from [<c01cacec>] (hub_port_init+0x3d8/0x634)
[26435.102752] [<c01ca914>] (hub_port_init+0x0/0x634) from [<c01cc3e4>] (hub_events+0x86c/0xe64)
[26435.102813] [<c01cbb78>] (hub_events+0x0/0xe64) from [<c01ce034>] (hub_thread+0x30/0x19c)
[26435.102874] [<c01ce004>] (hub_thread+0x0/0x19c) from [<c006da90>] (kthread+0x54/0x80)
[26435.102935] r6:00000000 r5:c01ce004 r4:00000000
[26435.102996] [<c006da3c>] (kthread+0x0/0x80) from [<c005a950>] (do_exit+0x0/0x7bc)
[26435.103057] r5:00000000 r4:00000000
[26435.103088] ---[ end trace adbd6ed65c91e9be ]---
[26435.124694] usb 1-1: khubd timed out on ep0out len=0/0
[26435.334686] usb 1-1: device not accepting address 35, error -110
[26435.459838] usb 1-1: new full speed USB device using musb_hdrc and address 36
[26441.458312] ------------[ cut here ]------------
[26441.458374] WARNING: at /home/builder2/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/musb/musb_host.c:128 musb_h_tx_flush_fifo+0x94/0xcc()
[26441.458404] Could not flush host TX0 fifo: csr: 000a
[26441.458404] Modules linked in: ipv6 pn_pep vfat fat sd_mod scsi_mod iphb rfcomm panic_info_buff sco l2cap ext3 jbd omaplfb pvrsrvkm bridgedriver g_file_storage uinput board_rx51_camera et8ek8 omap_previewer_hack omap34xxcam_mod isp_mod iovmm videobuf_dma_sg videobuf_core omap3_iommu iommu2 iommu dspbridge ssi_mcsaab_imp phonet cmt_speech joydev wl12xx smc91x mii omap_ssi nokia_av hci_h4p mac80211 crc7 tsc2005 bluetooth fmtx_si4713 smia_sensor ad5820 adp1653 rtc_twl4030 tsl2563 leds_twl4030_vibra lis302dl videodev v4l1_compat compat_ioctl32 rtc_core smiaregs v4l2_int_device ntfs nls_utf8 leds_lp5523 led_class mmc_block omap_hsmmc mmc_core twl4030_wdt omap_wdt
[26441.458709] [<c0030470>] (dump_stack+0x0/0x14) from [<c0057444>] (warn_slowpath+0x64/0x80)
[26441.458770] [<c00573e0>] (warn_slowpath+0x0/0x80) from [<c01e9a60>] (musb_h_tx_flush_fifo+0x94/0xcc)
[26441.458801] r3:00000000 r2:c0349b67
[26441.458801] r6:d80ab100 r5:0000000a r4:0000000a
[26441.458831] [<c01e99cc>] (musb_h_tx_flush_fifo+0x0/0xcc) from [<c01ea930>] (musb_cleanup_urb+0xc0/0x10c)
[26441.458862] [<c01ea870>] (musb_cleanup_urb+0x0/0x10c) from [<c01eb134>] (musb_urb_dequeue+0x1dc/0x248)
[26441.458923] [<c01eaf58>] (musb_urb_dequeue+0x0/0x248) from [<c01cec9c>] (unlink1+0x108/0x114)
[26441.458953] [<c01ceb94>] (unlink1+0x0/0x114) from [<c01cfc38>] (usb_hcd_unlink_urb+0x9c/0xf8)
[26441.458984] [<c01cfb9c>] (usb_hcd_unlink_urb+0x0/0xf8) from [<c01d0af4>] (usb_kill_urb+0x84/0x14c)
[26441.459014] r7:c93afa80 r6:c93afa80 r5:cf0a6000 r4:00000000
[26441.459045] [<c01d0a70>] (usb_kill_urb+0x0/0x14c) from [<c01d1d78>] (usb_start_wait_urb+0x80/0x120)
[26441.459075] r6:00001388 r5:cf0a7e50 r4:00000000
[26441.459106] [<c01d1cf8>] (usb_start_wait_urb+0x0/0x120) from [<c01d1ff8>] (usb_control_msg+0xc4/0xe8)
[26441.459136] [<c01d1f34>] (usb_control_msg+0x0/0xe8) from [<c01cacec>] (hub_port_init+0x3d8/0x634)
[26441.459197] [<c01ca914>] (hub_port_init+0x0/0x634) from [<c01cc3e4>] (hub_events+0x86c/0xe64)
[26441.459228] [<c01cbb78>] (hub_events+0x0/0xe64) from [<c01ce034>] (hub_thread+0x30/0x19c)
[26441.459259] [<c01ce004>] (hub_thread+0x0/0x19c) from [<c006da90>] (kthread+0x54/0x80)
[26441.459289] r6:00000000 r5:c01ce004 r4:00000000
[26441.459320] [<c006da3c>] (kthread+0x0/0x80) from [<c005a950>] (do_exit+0x0/0x7bc)
[26441.459350] r5:00000000 r4:00000000
[26441.459381] ---[ end trace adbd6ed65c91e9be ]---
[26441.542388] usb 1-1: khubd timed out on ep0out len=0/0
[26447.749176] ------------[ cut here ]------------
[26447.749267] WARNING: at /home/builder2/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/musb/musb_host.c:128 musb_h_tx_flush_fifo+0x94/0xcc()
[26447.749298] Could not flush host TX0 fifo: csr: 000a
[26447.749328] Modules linked in: ipv6 pn_pep vfat fat sd_mod scsi_mod iphb rfcomm panic_info_buff sco l2cap ext3 jbd omaplfb pvrsrvkm bridgedriver g_file_storage uinput board_rx51_camera et8ek8 omap_previewer_hack omap34xxcam_mod isp_mod iovmm videobuf_dma_sg videobuf_core omap3_iommu iommu2 iommu dspbridge ssi_mcsaab_imp phonet cmt_speech joydev wl12xx smc91x mii omap_ssi nokia_av hci_h4p mac80211 crc7 tsc2005 bluetooth fmtx_si4713 smia_sensor ad5820 adp1653 rtc_twl4030 tsl2563 leds_twl4030_vibra lis302dl videodev v4l1_compat compat_ioctl32 rtc_core smiaregs v4l2_int_device ntfs nls_utf8 leds_lp5523 led_class mmc_block omap_hsmmc mmc_core twl4030_wdt omap_wdt
[26447.749908] [<c0030470>] (dump_stack+0x0/0x14) from [<c0057444>] (warn_slowpath+0x64/0x80)
[26447.750000] [<c00573e0>] (warn_slowpath+0x0/0x80) from [<c01e9a60>] (musb_h_tx_flush_fifo+0x94/0xcc)
[26447.750091] r3:00000000 r2:c0349b67
[26447.750122] r6:d80ab100 r5:0000000a r4:0000000a
[26447.750152] [<c01e99cc>] (musb_h_tx_flush_fifo+0x0/0xcc) from [<c01ea930>] (musb_cleanup_urb+0xc0/0x10c)
[26447.750213] [<c01ea870>] (musb_cleanup_urb+0x0/0x10c) from [<c01eb134>] (musb_urb_dequeue+0x1dc/0x248)
[26447.750305] [<c01eaf58>] (musb_urb_dequeue+0x0/0x248) from [<c01cec9c>] (unlink1+0x108/0x114)
[26447.750366] [<c01ceb94>] (unlink1+0x0/0x114) from [<c01cfc38>] (usb_hcd_unlink_urb+0x9c/0xf8)
[26447.750457] [<c01cfb9c>] (usb_hcd_unlink_urb+0x0/0xf8) from [<c01d0af4>] (usb_kill_urb+0x84/0x14c)
[26447.750518] r7:c93afa80 r6:c93afa80 r5:cf0a6000 r4:00000000
[26447.750579] [<c01d0a70>] (usb_kill_urb+0x0/0x14c) from [<c01d1d78>] (usb_start_wait_urb+0x80/0x120)
[26447.750640] r6:00001388 r5:cf0a7e50 r4:00000000
[26447.750701] [<c01d1cf8>] (usb_start_wait_urb+0x0/0x120) from [<c01d1ff8>] (usb_control_msg+0xc4/0xe8)
[26447.750762] [<c01d1f34>] (usb_control_msg+0x0/0xe8) from [<c01cacec>] (hub_port_init+0x3d8/0x634)
[26447.750854] [<c01ca914>] (hub_port_init+0x0/0x634) from [<c01cc3e4>] (hub_events+0x86c/0xe64)
[26447.750915] [<c01cbb78>] (hub_events+0x0/0xe64) from [<c01ce034>] (hub_thread+0x30/0x19c)
[26447.750976] [<c01ce004>] (hub_thread+0x0/0x19c) from [<c006da90>] (kthread+0x54/0x80)
[26447.751037] r6:00000000 r5:c01ce004 r4:00000000
[26447.751098] [<c006da3c>] (kthread+0x0/0x80) from [<c005a950>] (do_exit+0x0/0x7bc)
[26447.751159] r5:00000000 r4:00000000
[26447.751190] ---[ end trace adbd6ed65c91e9be ]---
[26447.824554] usb 1-1: khubd timed out on ep0out len=0/0
[26448.029937] usb 1-1: device not accepting address 36, error -110
[26448.030029] hub 1-0:1.0: unable to enumerate USB device on port 1
[26448.030059] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[26448.030090] hub 1-0:1.0: port 1 enable change, status 00000101
[26450.202667] hub 1-0:1.0: hub_suspend
[26450.202758] usb usb1: bus auto-suspend
[26450.202789] musb_bus_suspend 2266: trying to suspend as a_host is_active=1
[26450.202850] usb usb1: bus suspend fail, err -16
[26450.202880] hub 1-0:1.0: hub_resume
[26450.202941] hub 1-0:1.0: port 1: status 0101 change 0000
[26450.203033] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[26450.203125] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[26450.327026] usb 1-1: new full speed USB device using musb_hdrc and address 37
[26455.326904] usb 1-1: khubd timed out on ep0in len=0/64
[26460.327056] usb 1-1: khubd timed out on ep0in len=0/64
[26465.327239] usb 1-1: khubd timed out on ep0in len=0/64
[26465.451873] usb 1-1: device descriptor read/64, error -110
[26470.561248] usb 1-1: khubd timed out on ep0in len=0/64

joerg_rw | # 140 | 2011-02-06, 12:00 | Report

please copy/move this post to http://talk.maemo.org/showthread.php?t=65232 [Announce] USB hostmode beta release.

This is clearly h-e-n kernel related, and needs somebody checking & fixing weird stuff e.g. in

http://mxr.maemo.org/fremantle/sourc...usb_regs.h#278
http://mxr.maemo.org/fremantle/sourc...usb_regs.h#480
http://mxr.maemo.org/fremantle/sourc...usb_host.c#111
etc.
Please add as much info as possible, esp *full* syslog as attachment, as well as precise description of the steps taken

thanks
jOERG