Camera App Just don't started - Page 2 - maemo.org

handaxe | # 11 | 2011-01-29, 16:19 | Report

keep the same kernel but use for eg QCpuFreq to set the speed back to the default.

freak-bg | # 12 | 2011-01-30, 12:40 | Report

Originally Posted by handaxe View Post

keep the same kernel but use for eg QCpuFreq to set the speed back to the default.

Nope still nothing ... I noticed that my mirror App don't start too ...Saying some Gstream Error ...

neotalk | # 13 | 2011-01-30, 13:05 | Report

are you using a power kernel? do you use bless or fcam?

if you use fcam try root
apt-get update
apt-get upgrade fcam-drivers

if you use fcam and bless remove bless

if you use titans kernel then there is a fcam driver file that corrects the cam issue.

some more info on your setup and what cam apps you have would help,

neotalk | # 14 | 2011-01-30, 13:11 | Report

and for flashing your phone completly to remove everthing and remove overclocking and get it back to factory settings you need to read how to via this link:

http://wiki.maemo.org/Updating_the_tablet_firmware

handaxe | # 15 | 2011-01-30, 19:32 | Report

@Freak-bg: the steps Neotalk outlined are good but I am confused. You wrote that you reflashed (incl. emmc) and no luck and also mentioned that you o-c (with titan? kernel) but using default freq still made no difference.

Did you test camera after reflashing but before installing the power kernel?

If you follow neotalk's 2nd post and, using an "out of the box" setup, the camera does not work then there is nothing that can be done from a software pov. That USB repair job potentially may be implicated.

You can also try the following in a terminal. Using gstreamer, and with the camera cover open, it should bring up a feed to the n900's screen. If that does not work then refer my comments above....

Code:

gst-launch v4l2src ! ffmpegcolorspace ! videoflip method=4 ! autovideosink

freak-bg | # 16 | 2011-01-31, 08:04 | Report

I was using Bliss before the flashing ... now I am not using any other camera apps

freak-bg | # 17 | 2011-01-31, 08:08 | Report

freak-bg | # 18 | 2011-01-31, 08:22 | Report

Whit gst-launch v4l2src ... there is the message

Originally Posted by

Setting Pipeline to PAUSED
ERROR: Pipeline doesn't want to pause.
ERROR: from element /GstPipeline: pipeline0/GstV4l2Src:v4l2src0: Device '/dev/video0' is not a capture device

handaxe | # 19 | 2011-01-31, 08:26 | Report

It appears to be a hardware problem.....

Code:

gst-launch v4l2src device=/dev/video1 ! ffmpegcolorspace ! videoflip method=4 ! autovideosinka

The above should stream from the front camera - image is dark so use good light. That probably will not work either as mirror failed for u 2. Back to the repair shop....

Last edited by handaxe; 2011-01-31 at 08:48.

freak-bg | # 20 | 2011-01-31, 22:42 | Report

Originally Posted by handaxe View Post

It appears to be a hardware problem.....

Code:

gst-launch v4l2src device=/dev/video1 ! ffmpegcolorspace ! videoflip method=4 ! autovideosinka

The above should stream from the front camera - image is dark so use good light. That probably will not work either as mirror failed for u 2. Back to the repair shop....

So the phone will go back to the repair shop ... Since I don't have warranty it will be a nice investment for a camera