matstumpf | # 1 | 2011-02-04, 16:25 | Report

Hi!
at some time ago, my keyboard leds stopped working, and i think the problem is with the magnetic sensor.
with the command:

cat /proc/kmsg

there's no output with "slide (GPIO 71)..." when i open or close the keyboard.
So, i opened my phone and didn't find nothing wrong, and made some tests with other n900, from mine friend.

if i take only my motherboard out and replace with mine friend's m.b., the lighs works.

so, the problem is with my motherboard, because the leds are working(tested with one app).

and the question is: the magnetic sensor is in the motherboard? if yes, where is? maybe some image?

thanks a lot!!

ps: sorry about the english, i'm from brazil..

cutehunk04 | # 2 | 2011-02-04, 16:36 | Report

is ur incoming notifications are working....if no..then while your cell is running just take out the battery and put it back after 1O seconds. may be this will work.....

matstumpf | # 3 | 2011-02-04, 16:37 | Report

yes, incoming notification are working! =/

matstumpf | # 4 | 2011-02-04, 16:53 | Report

other fact: if i pass a magnet on the phone like this: http://www.youtube.com/watch?v=ID0qd0zLAIQ

it does nothing.

matstumpf | # 5 | 2011-02-07, 20:11 | Report

maybe is this the sensor?

Pavol | # 6 | 2011-02-07, 20:43 | Report

yes magnetic sensor

matstumpf | # 7 | 2011-02-07, 23:12 | Report

oh, i think mine sensor is damaged, it looks like "rusty" (I don't know how to speak in english, in portuguese=oxidado)..
how can i fix it, or buy another one?
ps: Don't have nokia repair in my state, so i have to do this for myself..

thanks!

matstumpf | # 8 | 2011-02-08, 01:38 | Report

there is some script to enable keyboard lights? because is hard to write when is dark =P

thanks!!

Radu | # 9 | 2011-02-08, 09:30 | Report

Actually, my keyboard light stopped working as well..
My slide (GPIO 71) is toggled properly when opening/closing the keyboard, but there is still no light.. Any ideas?

matstumpf | # 10 | 2011-02-08, 13:00 | Report

i've seen in other posts that the fix is taking off the battery, plugin the wall charger(without battery), wait a while, disconnect charger and then put battery back.. did you tried this?

if this doesn't work, maybe reflashing the device in last case could solve!