Can't you access the man circuit board after you have removed the screen ? I dissembled my own phone completely and it seemed to me that every part was accessible.

hard to take a picture but here goes
as you can see i had to cut some of the metal frame off, and i have just soldered a wire where the fuse should be.

to give a scale, that wire is only 2 stands and solder thats how damm small that is.......

I think you will have a good chance finding one here.

Now i get why you had to cut the screen !

thanks, i already searched farnell, RC and such but i didn't find it
but now i have a couple of candidates

http://se.farnell.com/bourns/sf-0402...-2a/dp/1652129
http://se.farnell.com/tyco-electroni...-2a/dp/1843786

and only approx 10kr for both (SEK kr even )
if anybody should be curious thats just over 1 euro, and about 1.5$

Ok i've got the 2$ crap battery from dealextrem, now i will by a good one ^^
thanks for all this test

Hi guys,I could need some ideas here.

I bought two Japods in hope of somehow getting over 1300 mAh when charging, because even my genuine N900 nokia battery only charges up to 1222 max. This means I never saw a battery status over 1300 mAh and I'm having no clue what could causing this.

The same is with the japods both were only charging to 1222 mAh. Is there something software related I need to reset for getting full charging back?!
The wiki about software BME writes something about learrning thee battery's capacity.

thanks in advance,

Greetz,

..::J4ZZ::..

Mine is equal yours... 1222 and 1223 for Japod's...

i must assume you both are referring to what the phone is telling you and not external testing equipment, we have been over this a million times, my mega battery that has 2765mAh also shows 1200mAh on the phone, this is controlled with a resistor in the battery's electronics.

which means that you can get your stock battery to report anything from 100mAh - 4000mAh+

updated battery meter with Ver 1.4 now with LED notification