rayman2k1 | # 1 | 2011-02-17, 21:35 | Report

so i've been reading about the host of problems that have been caused by loose/missing magnets on the back cover of the n900.
i've been having a problem that nobody has addressed before. i know that the sensor is effed on my n900, so i use a little script using gconftool. it sets these values manually:
internal-mmc-device-present (true)
mmc-cover-open (false)
internal-mmc-cover-open (false)
mmc-device-present (true)

this has helped bring back the functionality of the camera lens cover, but nothing as far as the memory card slot.

but i have a more fundamental problem in that in /dev, there is no entry for the memory card. there is only mmcblk0 and its associated mmcblk0p1..p3 which represent the emmc. as such, there are no messages in dmesg in regards to anything mmc. also, i obviously can't manually mount the device as it's not even present.

does anyone have any idea of what i can do to fix this? any help would be much appreciated.

shallimus | # 2 | 2011-02-17, 21:47 | Report

Don't know, but I'd be very interested to know more as I'm in the same boat as you (possibly eff'd back cover sensor, definitely missing magnet, experiments with replacing magnet were not full of win).

---

Last edited by shallimus; 2011-02-18 at 16:01.

rayman2k1 | # 3 | 2011-02-17, 21:58 | Report

you may wanna try this:

http://www.forums.internettablettalk...t=38739&page=4

casper27 | # 4 | 2011-02-17, 21:59 | Report

Can you not just buy a new back cover. You can get one for less than $10 on Ebay. Must be better than going through this much trouble.

juise- | # 5 | 2011-02-18, 11:47 | Report

It works if the problem is that the magnet fell off from the back cover. But if the sensor that detects that magnet is broken (which appears to be the case with OP), it won't help.

StefanL | # 6 | 2011-02-18, 12:17 | Report

Same here, is anybody able to shed some light on how to get the mmcblk1 device definition into /dev? Much appreciated.