colla84 | # 561 | 2011-03-01, 16:01 | Report

but in my n900 it's installed driver wl1251

FRuMMaGe | # 562 | 2011-03-01, 17:09 | Report

Ok i am getting really sick of answering what is essentially the same problem over and over again.

The network you are attempting to crack is WPA, therefore you dont need to authenticate or inject. That is why the buttons are disabled.

Please read the first post for instructions on how to crack wpa networks

colla84 | # 563 | 2011-03-01, 18:32 | Report

yes but after 100000 beacons dont appear handshake windows :|

mooglez | # 564 | 2011-03-01, 19:43 | Report

then nobody connected to the AP.

have you actually scaled the window down a bit, so that you can see when the handshake is captured, or is that section out of the screen for you?

---

Last edited by mooglez; 2011-03-01 at 19:46.

Lenowar | # 565 | 2011-03-01, 20:07 | Report

I already have installed v46 powerkernel for the h-e-n run, what should I do with this tutorial:


http://talk.maemo.org/showthread.php?t=68002 (Bleeding-edge packet injection drivers by lxp)

I install everything that is posted?

FRuMMaGe | # 566 | 2011-03-01, 20:58 | Report

Read the instructions.

It only generates the handshake when a client connects

FRuMMaGe | # 567 | 2011-03-01, 20:59 | Report

Yes. Instal the v46 version that comes with the drivers

Lenowar | # 568 | 2011-03-01, 21:20 | Report

I click on the buttons Injection Enable and Monitor on the faircrack, nothing happens, help?
i installed aircrack, drivers wifi, pyqt, john, faircrack, rebooted, what's now?

FRuMMaGe | # 569 | 2011-03-02, 00:05 | Report

Run in terminal:

sh /home/user/MyDocs/FAS/launch.sh

And post the output when you click the buttons

EDIT: Ok, since half of the posts here are from people who have not bothered to read the instructions thoroughly, I want to clarify something.

Aircrack is a pretty complicated program to use, particularly if you are new to it. That is why I made this software, just to simplify the usage and make it much quicker than manually typing in each command. However, you still need to have at least a rough understanding of what it is actually doing.

I have made the instructions in the first post as easy and informative as possible, so it is genuinely irritating that there are so many posts along the lines of "CANT INJECT IN MY WPA NETWRK OMFG!!!!!!!!111!1!!" and "IVE CAPTURED 10000000000000 BEACONS BUT CANT FIND KEY!!!!!!!!!". Please read the first post thoroughly.

I'm not saying I don't want to help people, but most people are asking questions that have been answered many many times. I think most of these questions can only really be answered with an exasperated face-palm.

---

Last edited by FRuMMaGe; 2011-03-02 at 00:38.

Lenowar | # 570 | 2011-03-02, 02:19 | Report

Run on terminal:

Maemo application must be run with the run-standalone.sh script
QGtkStyle was unable to detect the current GTK+ theme.
Segmentation Fault

only this!