The in-development Maemo 5 Community SSU - Page 220 - maemo.org

HughF_UK | # 2191 | 2011-03-23, 16:19 | Report

This is me... it makes no difference if I have widgets on the desktops or an SD card inserted... It was however plugged into the charger when this was run.

Code:

Powertop 1.13.3
Sleeping for 11 seconds before sampling
Collecting data for 30 seconds
Sample interval was 00m 30s 8972us

C#      | Ratio  | Avg/dura | Frequency | Ratio
--------+--------+----------+-----------+--------+
     C0 |  25.3% |          |   600 MHz |  22.1% |
     C1 |  74.7% |   17.2ms |   550 MHz |   0.0% |
     C2 |   0.0% |    0.1ms |   500 MHz |  77.9% |
     C3 |   0.0% |          |   250 MHz |   0.0% |
     C4 |   0.0% |          | 

IRQ#    | Activity   | Type           | Name
--------+------------+----------------+---------------------------
     12 |       3307 |           INTC | DMA
     56 |       2357 |           INTC | i2c_omap
     86 |       1302 |           INTC | mmc1
     37 |       1121 |           INTC | gp
     57 |         69 |           INTC | i2c_omap
    225 |         20 |           GPIO | omap2-onenand
    202 |         14 |           GPIO | wl1251
     11 |          9 |           INTC | prcm

PID#    | Activity   | Name           | Function Entry (Expire)
--------+------------+----------------+---------------------------
      0 |       1013 |  <kernel core> | tick_nohz_restart_sched_tick (tick_sched_timer)
    517 |         84 |          mmcqd | cfq_completed_request (cfq_idle_slice_timer)
     38 |         62D|            awk | cpufreq_governor_dbs (delayed_work_timer_fn)
    517 |         23 |          mmcqd | queue_delayed_work (delayed_work_timer_fn)
     15 |         23 |        kswapd0 | blk_plug_device (blk_unplug_timeout)
      0 |         20 |  <kernel core> | hrtimer_start (tick_sched_timer)
   1443 |         19 |         modest | schedule_hrtimeout_range (hrtimer_wakeup)
    693 |         18 |      bme_RX-51 | sys_timer_settime (posix_timer_fn)
    693 |         18 |      bme_RX-51 | schedule_timeout (process_timeout)
    693 |         15 |      bme_RX-51 | sys_timer_settime (posix_timer_fn)
   1104 |         14 | hildon-desktop | schedule_hrtimeout_range (hrtimer_wakeup)
     15 |         13 |        kswapd0 | schedule_timeout (process_timeout)
    661 |          9 |           dsme | __enqueue_rt_entity (sched_rt_period_timer)
    462 |          7 |         wl12xx | queue_delayed_work (delayed_work_timer_fn)
   1543 |          7 |        browser | do_nanosleep (hrtimer_wakeup)
   1543 |          7 |        browser | schedule_hrtimeout_range (hrtimer_wakeup)
     30 |          5 |          mount | setup_wb_timer (wb_timer_fn)
   1549 |          4 |       browserd | futex_wait (hrtimer_wakeup)
    661 |          3 |           dsme | do_nanosleep (hrtimer_wakeup)
    462 |          3 |         wl12xx | schedule_timeout (process_timeout)
   1160 |          2 |  BatteryGraphd | journal_get_write_access (commit_timeout)
      1 |          2D|  <kernel core> | queue_delayed_work (delayed_work_timer_fn)
    693 |          2 |      bme_RX-51 | do_nanosleep (hrtimer_wakeup)
   1547 |          2 |       browserd | blk_plug_device (blk_unplug_timeout)
   1547 |          2 |       browserd | journal_get_write_access (commit_timeout)
   1133 |          2 |       wlancond | ieee80211_ioctl_siwpower (ieee80211_dynamic_ps_timer)
    760 |          2 |       gconfd-2 | ubifs_wbuf_write_nolock (wbuf_timer_callback_nolock)
   1519 |          2 |       browserd | futex_wait (hrtimer_wakeup)
   1160 |          1 |  BatteryGraphd | schedule_hrtimeout_range (hrtimer_wakeup)
     14 |          1 |        pdflush | blk_plug_device (blk_unplug_timeout)
    883 |          1 | hald-addon-bme | schedule_hrtimeout_range (hrtimer_wakeup)
   1160 |          1 |  BatteryGraphd | ubifs_wbuf_write_nolock (wbuf_timer_callback_nolock)
   1002 |          1 | sapwood-server | blk_plug_device (blk_unplug_timeout)
   1002 |          1 | sapwood-server | schedule_timeout (process_timeout)
   1002 |          1 | sapwood-server | schedule_hrtimeout_range (hrtimer_wakeup)
   1101 |          1 |    hildon-home | schedule_hrtimeout_range (hrtimer_wakeup)
   1551 |          1 |e-addressbook-f | schedule_timeout (process_timeout)
   1551 |          1 |e-addressbook-f | futex_wait (hrtimer_wakeup)
   1547 |          1 |       browserd | schedule_timeout (process_timeout)
    760 |          1 |       gconfd-2 | schedule_hrtimeout_range (hrtimer_wakeup)
    462 |          1 |         wl12xx | schedule_timeout (process_timeout)
   1443 |          1 |         modest | schedule_timeout (process_timeout)
   1443 |          1 |         modest | journal_get_write_access (commit_timeout)
    730 |          1 |            mce | schedule_hrtimeout_range (hrtimer_wakeup)
   1133 |          1 |       wlancond | schedule_timeout (process_timeout)
   1133 |          1 |       wlancond | queue_delayed_work (delayed_work_timer_fn)
     10 |          1 |    omap2_mcspi | neigh_add_timer (neigh_timer_handler)
   1538 |          1 |       powertop | do_nanosleep (hrtimer_wakeup)

Power domain activity breakdown
Domain  | % of time spent in states
--------+---------+---------+---------+---------+----------
usbhost |OFF: 100%|RET:   0%|INA:   0%| ON:   0%| now:(OFF)
    sgx |OFF: 100%|RET:   0%|INA:   0%| ON:   0%| now:(OFF)
    per |OFF:   0%|RET:   0%|INA:   0%| ON:  99%| now:(ON)
    dss |OFF: 100%|RET:   0%|INA:   0%| ON:   0%| now:(OFF)
    cam |OFF: 100%|RET:   0%|INA:   0%| ON:   0%| now:(OFF)
   core |OFF:   0%|RET:   0%|INA:   0%| ON: 100%| now:(ON)
   neon |OFF:   0%|RET:   0%|INA:   0%| ON:  99%| now:(ON)
    mpu |OFF:   0%|RET:   0%|INA:   0%| ON:  99%| now:(ON)
   iva2 |OFF: 100%|RET:   0%|INA:   0%| ON:   0%| now:(OFF)

Clock activity breakdown at end of period
Domain  | Active clocks
--------+---------------+---------------+------------------
   core |          SDRC | HSOTGUSB_STBY | HSOTGUSB_IDLE 
        |      OMAPCTRL |     MAILBOXES |
   wkup |          GPT1 |       32KSYNC |         GPIO1 
        |           SR1 |           SR2 |
  ckgen |          CORE |          PERI |           96M 
        |           48M |           12M |           54M 
        |      EMU_CORE |
    per |         GPIO2 |         GPIO3 |         GPIO4 
        |         GPIO5 |         GPIO6 |

Total wakeups  9602, 320.1/s | IRQ 8199, 273.3/s | Timers 1403,  46.8/s
HW wakeups        9,   0.3/s |     Real gp_timers expired   97,   3.2/s

I have enabled the sr_vdd1 and sr_vdd2 autocomp features in /etc/pmconfig but that should improve things surely?

Last edited by HughF_UK; 2011-03-23 at 16:23.

corduroysack | # 2192 | 2011-03-23, 16:26 | Report

sh: status: not found
Sleeping for 11 seconds before sampling
Collecting data for 30 seconds
Sample interval was 00m 30s 29267us

C# | Ratio | Avg/dura | Frequency | Ratio
--------+--------+----------+-----------+--------+
C0 | 0.4% | | 1150 MHz | nan% |
C1 | 0.0% | 0.3ms |
C2 | 0.4% | 3.3ms |
C3 | 8.1% | 220.8ms |
C4 | 91.1% | 2103.6ms |

IRQ# | Activity | Type | Name
--------+------------+----------------+---------------------------
56 | 129 | INTC | i2c_omap
11 | 50 | INTC | prcm
37 | 43 | INTC | gp
57 | 34 | INTC | i2c_omap
21 | 2 | INTC | SGX
Segmentation fault

this is my powertop and i'm running cssu, don't know what a segmentation fault is though

tyrian89 | # 2193 | 2011-03-23, 16:34 | Report

Originally Posted by corduroysack View Post

sh: status: not found
Sleeping for 11 seconds before sampling
Collecting data for 30 seconds
Sample interval was 00m 30s 29267us

C# | Ratio | Avg/dura | Frequency | Ratio
--------+--------+----------+-----------+--------+
C0 | 0.4% | | 1150 MHz | nan% |
C1 | 0.0% | 0.3ms |
C2 | 0.4% | 3.3ms |
C3 | 8.1% | 220.8ms |
C4 | 91.1% | 2103.6ms |

IRQ# | Activity | Type | Name
--------+------------+----------------+---------------------------
56 | 129 | INTC | i2c_omap
11 | 50 | INTC | prcm
37 | 43 | INTC | gp
57 | 34 | INTC | i2c_omap
21 | 2 | INTC | SGX
Segmentation fault

this is my powertop and i'm running cssu, don't know what a segmentation fault is though

Run it as root, I had the same issue.

The Following User Says Thank You to tyrian89 For This Useful Post:
corduroysack

MohammadAG | # 2194 | 2011-03-23, 16:40 | Report

Originally Posted by HughF_UK View Post

This is me... it makes no difference if I have widgets on the desktops or an SD card inserted... It was however plugged into the charger when this was run.

I have enabled the sr_vdd1 and sr_vdd2 autocomp features in /etc/pmconfig but that should improve things surely?

PR1.3's kernel introcued a tweak that caused a bug, the CPU maxes out while charging, either reverse that and compile your own kernel, or get kernel-power.

corduroysack | # 2195 | 2011-03-23, 16:41 | Report

/home/user # powertop
Powertop 1.13.3
status: Unknown job: pmtrackerdaemon
Sleeping for 11 seconds before sampling
Collecting data for 30 seconds
Sample interval was 00m 30s 22339us

C# | Ratio | Avg/dura | Frequency | Ratio
--------+--------+----------+-----------+--------+
C0 | 1.2% | | 1150 MHz | nan% |
C1 | 0.3% | 96.7ms |
C2 | 2.9% | 9.1ms |
C3 | 8.6% | 99.7ms |
C4 | 86.9% | 745.5ms |

IRQ# | Activity | Type | Name
--------+------------+----------------+---------------------------
56 | 373 | INTC | i2c_omap
86 | 123 | INTC | mmc1
37 | 112 | INTC | gp
11 | 91 | INTC | prcm
57 | 42 | INTC | i2c_omap
12 | 37 | INTC | DMA
67 | 19 | INTC | ssi_p1_mpu_irq0
71 | 13 | INTC | ssi_gdd
311 | 6 | GPIO | ssi_p1_cawake_gpio
21 | 2 | INTC | SGX

PID# | Activity | Name | Function Entry (Expire)
--------+------------+----------------+---------------------------
0 | 43 | <kernel core> | tick_nohz_restart_sched_tick (tick_sched_timer)
0 | 36 | <kernel core> | hrtimer_start (tick_sched_timer)
38 | 32D| awk | cpufreq_governor_dbs (delayed_work_timer_fn)
627 | 14 | mmcqd | schedule_timeout (process_timeout)
627 | 10 | mmcqd | queue_delayed_work (delayed_work_timer_fn)
1174 | 10 | hildon-home | schedule_hrtimeout_range (hrtimer_wakeup)
734 | 9 | bme_RX-51 | sys_timer_settime (posix_timer_fn)
10 | 4 | omap2_mcspi | inet_twsk_schedule (inet_twdr_hangman)
3380 | 3 | osso-xterm | schedule_hrtimeout_range (hrtimer_wakeup)
3134 | 3 | browserd | futex_wait (hrtimer_wakeup)
703 | 3 | dsme | do_nanosleep (hrtimer_wakeup)
703 | 3 | dsme | __enqueue_rt_entity (sched_rt_period_timer)
734 | 3 | bme_RX-51 | schedule_timeout (process_timeout)
1 | 3D| <kernel core> | queue_delayed_work (delayed_work_timer_fn)
0 | 2 | <kernel core> | queue_delayed_work (delayed_work_timer_fn)
10 | 2 | omap2_mcspi | neigh_add_timer (neigh_timer_handler)
1722 | 2D|<kernel module> | queue_delayed_work (delayed_work_timer_fn)
627 | 2 | mmcqd | schedule_timeout (process_timeout)
734 | 2 | bme_RX-51 | do_nanosleep (hrtimer_wakeup)
30 | 2 | mount | setup_wb_timer (wb_timer_fn)
848 | 1 | Xorg | queue_delayed_work (delayed_work_timer_fn)
3117 | 1 | browserd | schedule_hrtimeout_range (hrtimer_wakeup)
3368 | 1 | browserd | futex_wait (hrtimer_wakeup)
1327 | 1 | sp360d | schedule_hrtimeout_range (hrtimer_wakeup)
2832 | 1 | pdflush | blk_plug_device (blk_unplug_timeout)
872 | 1 | hald-addon-bme | schedule_hrtimeout_range (hrtimer_wakeup)
627 | 1 | mmcqd | cfq_completed_request (cfq_idle_slice_timer)
3386 | 1 | powertop | do_nanosleep (hrtimer_wakeup)

Power domain activity breakdown
Domain | % of time spent in states
--------+---------+---------+---------+---------+----------
usbhost |OFF: 100%|RET: 0%|INA: 0%| ON: 0%| now

OFF)
sgx |OFF: 99%|RET: 0%|INA: 0%| ON: 0%| now

OFF)
per |OFF: 94%|RET: 3%|INA: 0%| ON: 1%| now

ON)
dss |OFF: 100%|RET: 0%|INA: 0%| ON: 0%| now

OFF)
cam |OFF: 100%|RET: 0%|INA: 0%| ON: 0%| now

OFF)
core |OFF: 86%|RET: 7%|INA: 0%| ON: 5%| now

ON)
neon |OFF: 86%|RET: 8%|INA: 2%| ON: 1%| now

ON)
mpu |OFF: 86%|RET: 8%|INA: 2%| ON: 1%| now

ON)
iva2 |OFF: 100%|RET: 0%|INA: 0%| ON: 0%| now

rantom | # 2196 | 2011-03-23, 16:54 | Report

Before I'll make a bug-report out of this I want to confirm it. Is the applications list open or closed source? I noticed, since installing CSSU, that you can't edit the position of icons in portrait, unless you enter the editing mode from landscape and then use CTRL+Shift+R to force the portrait.

The Following User Says Thank You to For This Useful Post:
Mentalist Traceur

pelago | # 2197 | 2011-03-23, 17:03 | Report

Originally Posted by rantom View Post

Is the applications list open or closed source?

Open source, I'm 99% sure.

The Following User Says Thank You to pelago For This Useful Post:

HELLASISGREECE | # 2198 | 2011-03-23, 17:12 | Report

when is the next update coming?

Bratag | # 2199 | 2011-03-23, 17:38 | Report

Originally Posted by HELLASISGREECE View Post

when is the next update coming?

When it gets here. Lord don't let this thread/project turn into a bunch of people clambering for the next new shiny thing.

The Following 2 Users Say Thank You to Bratag For This Useful Post:
Jaffa, Switch_

elie-7 | # 2200 | 2011-03-23, 17:39 | Report

just a small request

is it possible to have horizontal app menu scrolling instead of the vertical one, like on meego or galaxy S, and is it possible to have an horizontal task manager like on meego ??
cheers, and you guys are doing an awesome job, i'm going to reflash tonight as my phone's performance is getting slow after 20 hours of ON time, all these reboots are driving me crazy, cssu will be the first thing to get tomorow