|
2007-01-31
, 04:45
|
|
Posts: 3,096 |
Thanked: 1,525 times |
Joined on Jan 2006
@ Michigan, USA
|
#32
|
|
2007-02-01
, 05:15
|
Posts: 1 |
Thanked: 0 times |
Joined on Feb 2007
|
#34
|
|
2007-02-09
, 14:10
|
Posts: 29 |
Thanked: 1 time |
Joined on Jan 2007
@ New York City
|
#35
|
|
2007-02-09
, 14:31
|
Posts: 3,401 |
Thanked: 1,255 times |
Joined on Nov 2005
@ London, UK
|
#36
|
There's a potential reason found for this. In the case there have been earlier >=10 consecutive reboots, the device doesn't clear the reboot count ever and thinks that an error has occured too often in a row. As a result it always powers the device off.
If this is the cause of the bug, enabling the R&D mode (where this check is
not done) with flasher should allow the device to boot up completely.
|
2007-02-09
, 14:46
|
Posts: 29 |
Thanked: 1 time |
Joined on Jan 2007
@ New York City
|
#37
|
|
2007-02-09
, 15:11
|
Posts: 3,401 |
Thanked: 1,255 times |
Joined on Nov 2005
@ London, UK
|
#38
|
If enabling R&D mode results in a successful boot, why keep off the watchdog monitor? It is there for a reason, no. It is there so if there is a lockup, the Nokia will reboot.
What happens if there is a segfault and the watchdog is off? This is not a regular PC and I don't see a hardware reset nor a control-alt-delete would resolve things.
I would rather work with a safety net than have access to the N800 and then some buggy code gives it the final bork.
|
2007-02-10
, 01:34
|
Posts: 370 |
Thanked: 443 times |
Joined on Jan 2006
@ Italy
|
#39
|
flasher 3.0 --set-rd-flag=no-lifeguard-reset flasher 3.0 --disable-rd-mode boot
flasher-3.0 --set-rd-flag=no-lifeguard-reset -F RX-34_2007SE_2.2006.51-6_PR_COMBINED_MR0_ARM.bin -f -R
flasher3.0 --disable-rd-mode
flasher3.0 -R
|
2007-02-10
, 02:48
|
Posts: 3,401 |
Thanked: 1,255 times |
Joined on Nov 2005
@ London, UK
|
#40
|
So i flashed the device following exactly the instructions found here and on the list - i.e.
and the device booted on its second try.Code:flasher-3.0 --set-rd-flag=no-lifeguard-reset -F RX-34_2007SE_2.2006.51-6_PR_COMBINED_MR0_ARM.bin -f -R
What am I doing "wrong"? :/