Reply
Thread Tools
Posts: 1,320 | Thanked: 915 times | Joined on Feb 2010
#401
Originally Posted by Dousan View Post
Need a little help here.

Can't seem to connect my sixaxis to my N9.

I've downloaded and installed motionjoy + drivers and can connect it to my pc and when testing in motionjoy it's working.

When pairing in motionjoy I use custom mac address and push pair, disconnect usb.

Then open xterm and do all the codes, then start the monitor in emumaster and then turn on the sixaxis but no dice.

I'm using windows xp.

Regards Dousan...
Strange mine is working fine. Have you checked to make sure you have the exact bluetooth MAC address??
__________________
Well Nokia do at least know how to build a decent phone, just apparently don't know how to support it..

N900 Died Replaced with N8, Requested E7, "Accidentally Broke E7", Now rolling with an N9 and im loving it!


My Contributions

N900 Conversations Wiki Page
 

The Following User Says Thank You to godofwar424 For This Useful Post:
Dousan's Avatar
Posts: 1,161 | Thanked: 1,707 times | Joined on Jan 2010 @ Denmark
#402
Originally Posted by godofwar424 View Post
Strange mine is working fine. Have you checked to make sure you have the exact bluetooth MAC address??
Have tripple checked it, it's the right one.

Regards Dousan...
__________________
My Procreate art:
https://folio.procreate.art/dousan

My Søciety6:
http://society6.com/Dousan
 
Posts: 1,320 | Thanked: 915 times | Joined on Feb 2010
#403
Originally Posted by Dousan View Post
Have tripple checked it, it's the right one.

Regards Dousan...
Have you triple checked the codes you entered into x-term??

Also is your bluetooth enabled and visible BEFORE you start typing the commands into x-term??
__________________
Well Nokia do at least know how to build a decent phone, just apparently don't know how to support it..

N900 Died Replaced with N8, Requested E7, "Accidentally Broke E7", Now rolling with an N9 and im loving it!


My Contributions

N900 Conversations Wiki Page
 
Dousan's Avatar
Posts: 1,161 | Thanked: 1,707 times | Joined on Jan 2010 @ Denmark
#404
Originally Posted by godofwar424 View Post
Have you triple checked the codes you entered into x-term??

Also is your bluetooth enabled and visible BEFORE you start typing the commands into x-term??
The codes I have written myself and double checked, have even c/p the codes from a post made by sniper_swe.

The bluetooth is off and not visible, then i use:

# killall bluetoothd

and then the rest of the codes.

The thing is sometimes the bluetooth icon appears in the statusbar after issuing the commands ans sometimes it doesn't?

Regards Dousan...
__________________
My Procreate art:
https://folio.procreate.art/dousan

My Søciety6:
http://society6.com/Dousan
 
Posts: 1,320 | Thanked: 915 times | Joined on Feb 2010
#405
Originally Posted by Dousan View Post
The codes I have written myself and double checked, have even c/p the codes from a post made by sniper_swe.

The bluetooth is off and not visible, then i use:

# killall bluetoothd

and then the rest of the codes.

The thing is sometimes the bluetooth icon appears in the statusbar after issuing the commands ans sometimes it doesn't?

Regards Dousan...
Hmmm, turn bluetooth ON and make it VISIBLE!

Then killall bluetoothd

Then the other commands, then open up EmuMaster - SixAxis Monitor and then turn on your PS3 Controller with the Home Button, and it should appear in the SixAxis Monitor
__________________
Well Nokia do at least know how to build a decent phone, just apparently don't know how to support it..

N900 Died Replaced with N8, Requested E7, "Accidentally Broke E7", Now rolling with an N9 and im loving it!


My Contributions

N900 Conversations Wiki Page
 

The Following User Says Thank You to godofwar424 For This Useful Post:
Dousan's Avatar
Posts: 1,161 | Thanked: 1,707 times | Joined on Jan 2010 @ Denmark
#406
Originally Posted by godofwar424 View Post
Hmmm, turn bluetooth ON and make it VISIBLE!

Then killall bluetoothd

Then the other commands, then open up EmuMaster - SixAxis Monitor and then turn on your PS3 Controller with the Home Button, and it should appear in the SixAxis Monitor
Tried some what different ways to make it work still no dice, the monitor screen stays all black.

Anyway thanks for your help.

Will try to reinstall everything and try again.

Regards Dousan...
__________________
My Procreate art:
https://folio.procreate.art/dousan

My Søciety6:
http://society6.com/Dousan
 

The Following User Says Thank You to Dousan For This Useful Post:
Posts: 314 | Thanked: 567 times | Joined on Oct 2011
#407
Do you know that MotionJoy expects MAC in reverse order?

Do you have the genuine SixAxis? (China imitation doesn't count, even it looks the same, most genuine has CECHZC2E product ID).
__________________
Do you like my work? Donate by PayPal Thank you!
 

The Following 2 Users Say Thank You to elemental For This Useful Post:
Dousan's Avatar
Posts: 1,161 | Thanked: 1,707 times | Joined on Jan 2010 @ Denmark
#408
Originally Posted by elemental View Post
Do you know that MotionJoy expects MAC in reverse order?

Do you have the genuine SixAxis? (China imitation doesn't count, even it looks the same, most genuine has CECHZC2E product ID).
Didn't know about reverse order?

Yes it's genuine.

Will try to reverse it and what happens.

Regards Dousan...
__________________
My Procreate art:
https://folio.procreate.art/dousan

My Søciety6:
http://society6.com/Dousan
 
Posts: 314 | Thanked: 567 times | Joined on Oct 2011
#409
When your MAC is:
12:34:56:78:9A:BC
you should type:
BC:9A:78:56:34:12
__________________
Do you like my work? Donate by PayPal Thank you!
 

The Following 2 Users Say Thank You to elemental For This Useful Post:
Dousan's Avatar
Posts: 1,161 | Thanked: 1,707 times | Joined on Jan 2010 @ Denmark
#410
Just awesome @elemental it works now.

Thanks for your help. Was starting to go nutts here, but your post saved me

Regards Dousan...
__________________
My Procreate art:
https://folio.procreate.art/dousan

My Søciety6:
http://society6.com/Dousan

Last edited by Dousan; 2012-06-16 at 21:46.
 
Reply


 
Forum Jump


All times are GMT. The time now is 03:06.