Active Topics
-
How many of you still use N900 as main phone? (592)
to Community by bradvesp - 2 days, 9 hrs ago -
Which is the best N95? What software modifications could be made to it? (3)
to General by Kalatti - 2 days, 18 hrs ago -
Installing CSSU Stable in year 2024 (2)
to Maemo 5 / Fremantle by teroyk - 3 days, 2 hrs ago -
Porting apps to Leste (34)
to Maemo 7 / Leste by Arno_11 - 3 days, 11 hrs ago -
[ANNOUNCE] CSSU-thumb thread - stable Thumb2 on N900 (2,266)
to Maemo 5 / Fremantle by pali - 5 days, 3 hrs ago -
Firefox with Leste (7)
to Maemo 7 / Leste by teroyk - 5 days, 7 hrs ago - more...
 |
|
2014-01-12
, 19:27
|
|
Posts: 562 |
Thanked: 2,744 times |
Joined on Dec 2013
@ Espoo, Finland
|
#72
|
Originally Posted by skvark
oooh there is mi problem.
Those were converted with FreeCAD from .stl back to solid models. .
The triangular STL is almost impossible to edit... this has now been gone to the STEP file too... I'm just heating my printer up.
EDIT: Previous stl was crap. this should be better.
Last edited by kimmoli; 2014-01-12 at 19:32.
|
|
2014-01-12
, 20:40
|
|
Posts: 562 |
Thanked: 2,744 times |
Joined on Dec 2013
@ Espoo, Finland
|
#74
|
Print finished.
Have to move the power switch opening a little, and add a smal notch to the bottom edge
Have to move the power switch opening a little, and add a smal notch to the bottom edge
|
|
2014-01-13
, 07:01
|
|
Posts: 646 |
Thanked: 1,124 times |
Joined on Jul 2010
@ Espoo, Finland
|
#77
|
Originally Posted by kimmoli
I looked at the frame with Netfabb Basic, and it marked the part as 'damaged'.
Attached is the tuned STL of OH outer frame.
Just add your own stuf on top of it...
It seems something weird about the four corners...
|
|
2014-01-13
, 07:20
|
|
Posts: 11 |
Thanked: 0 times |
Joined on Sep 2010
|
#78
|
Very interesting project.
I'd like to add serial port (UART RX/TX pins at least) capability to Jolla with I2C.
Are there I2C to UART converters that could do this ?
I'd like to add serial port (UART RX/TX pins at least) capability to Jolla with I2C.
Are there I2C to UART converters that could do this ?
|
|
2014-01-13
, 08:19
|
|
Guest |
Posts: n/a |
Thanked: 0 times |
Joined on
|
#79
|
Originally Posted by phenoboy
http://www.nxp.com/products/interfac...dges/#products
Very interesting project.
I'd like to add serial port (UART RX/TX pins at least) capability to Jolla with I2C.
Are there I2C to UART converters that could do this ?
|
|
2014-01-13
, 08:43
|
|
Posts: 562 |
Thanked: 2,744 times |
Joined on Dec 2013
@ Espoo, Finland
|
#80
|
I have given some toughts to this already...
--> or SC16IS850L. Has 1.8V operation, no need for I2C level converter, but needs 1.8V regulator. and some tricks to interface to 232 transceiver.
Originally Posted by nieldk
--> either SC16IS750. Has 3.3V operation, but you'll need I2C levelconverter (e.g. PCA9517) and 1.8V regulator. Easier to interface to the 232 transceiver.
http://www.nxp.com/products/interfac...dges/#products
--> or SC16IS850L. Has 1.8V operation, no need for I2C level converter, but needs 1.8V regulator. and some tricks to interface to 232 transceiver.
| The Following 2 Users Say Thank You to kimmoli For This Useful Post: | ||
I modeled the model originally with Autodesk 123D Design: https://www.123dapp.com/design
The .iges and .step can be found from here: http://relativity.fi/jolla_toh/3dmodels/ (I'll add the DWTFYWT-license). Those were converted with FreeCAD from .stl back to solid models. I can of course provide the 123D Design file too if needed.