[Question] - Does the Smartreflex work in P.R. 1.3?

[F2thaK]

much better.

I used to be O/C'd @ 1150 starving

But now im @ 805 ideal.

Cant notice any slow down in performance

I use WIFI quite a lot and usually by the end of the day my phone is flat. but now its around 20-30%.

[Erazor]

Originally Posted by vi_

For total max bro style battery life you may wish to consider limiting the device to 600MHz, you will notice the voltage jump from 600-700MHz is quite significant.

power=voltage^2*frequency

obviously how you are connected to the net also has a significant effect in battery.

i.e.

under-powered wifi>wifi>2G>3G


The other major pest is crumby software. Python+QML appz? forget it...hardware polling appz? forget it...

i'm on 2G btw

when i'm on 2G it needs much more power than on wifi

my cpu works great with the voltages

Originally Posted by yassirc

i make test days with 805 for you with my profile

Originally Posted by f2thak

when it works for you i test it too

but 805 is my max that i go.
don't see a sense in clocking a 600MHz CPU to 1150MHz

[Xagoln]

It seems for most people SR vdd1 works fine.

I enabled it again yesterday and within 5 minutes, my /var/lib/dpkg/available file was corrupted during an apt-get install operation.

But then my phone crashes if I even try to use the 'ideal' overclocking profile.

[yasirrfc]

okk thanks a lot

[Erazor]

every cpu is unique

not every cpu can handle all settings.
i'm one of the lucky guys who get a imba cpu.

no problems so far

btw my testday with 805MHz started for 1h

Greetz
Erazor

[yasirrfc]

ok lets see how this works

[Erazor]

okayyyyy

reboot @ 805MHz
played over the night music (with wallcharger)
and now 7.5h after i unpluged it, there is a reboot

seems that anything goes wrong with a process

for me it says that i set mine to my default clock

[IcyMoustache]

k guys, posted this somewhere else but I guess this is the right place....

does smartreflex work on the stock kernel??

[Erazor]

Originally Posted by IcyMoustache

k guys, posted this somewhere else but I guess this is the right place....

does smartreflex work on the stock kernel??

hmm i think no.
because you dont have a prfile for editing.

nothing wrong with the power-kernel

try it

[vi_]

Originally Posted by IcyMoustache

k guys, posted this somewhere else but I guess this is the right place....

does smartreflex work on the stock kernel??

Yes. Either:

1. as root:

echo "1" > /sys/power/sr_vdd1_autocomp
echo "1" > /sys/power/sr_vdd2_autocomp

or

2. set it in qcpufreq.