Vector, just reinstall in again, sometimes it takes a few times.
Install deb, reboot
worked?
yes = good
no then
Install deb, reboot
worked?
yes = good
no then
Install deb, reboot
worked?
yes = good
no then
Install deb, reboot
yep the 3rd time mine was doing it perfectly...now im looking into that kde thing..btw anyone with winimage canback up the sd /sdhc card...works perfectly i switch between 3 differrent cards..
...
I have no idea what to do next. Is there any other solution?
Many thanks, for any clue.
Vect0r.
Posting here is a very good idea. What do you think?
If you clone and went all right without ANY error statment, you need LLF. Most cards larger than 8G needs LLF, except a few. Info about LLF is on the same link you quoted, GeraldKo, thread #2.
Mind to share with us your make of the card and the size?
Mind to share with us your make of the card and the size?
Thanks.
Sure... my mistake. I have got a Kingtoston SDHC card, 4 gb capacity.
I am afraid, that even LLF did not help
I think, thats the end of my adventure with mmc boot.
Thank you very much anyway.
I appreciate your help. This is a very friendly forum.
Sure... my mistake. I have got a Kingtoston SDHC card, 4 gb capacity.
I am afraid, that even LLF did not help
I think, thats the end of my adventure with mmc boot.
Thank you very much anyway.
I appreciate your help. This is a very friendly forum.
Greetings
Vect0r.
Well I assume you read the 1st post, also known as instructions?
Make sure "virtual memory" is off in the control panel.
Make sure to save the deb to flash while installing, not on the SD card your trying to destroy.
Finally if you still can't install, POST you error log here
Open application manager, bring up the menu, go to "tools" > Log
Clear the log and install, then paste the log in here so we can see what is happening.
Posting here is a very good idea. What do you think?
If you clone and went all right without ANY error statment, you need LLF. Most cards larger than 8G needs LLF, except a few. Info about LLF is on the same link you quoted, GeraldKo, thread #2.
Mind to share with us your make of the card and the size?
Thanks.
I have used this on several cards, I HAVE NEVER EVER DONE A LOW LEVEL FORMAT...
Hi!
I spent several hours flashing and reflashing my N800, trying to find a way to boot from internal mmc card. I did try both ways: the "step by step" method, from this topic and the .deb file, made by mr penguinbait.
The result was similar - proces was uncorrupted, boot menu is functioning properly, but after choosing "boot from Internal MMC card, partition 2, ext2" the screen gets white, with information about booting above. After then Nokia appers to attempt to boot from mmc:
during several seconds and sudenly reboots, goes back to the boot menu, or shows message:
Result is similar.
I have no idea what to do next. Is there any other solution?
Many thanks, for any clue.
