quicksilver524 | # 391 | 2008-07-31, 19:44 | Report

i've reinstalled become root and i'm trying again

quicksilver524 | # 392 | 2008-07-31, 19:50 | Report

/home/user # umount /media/mmc2
/home/user # sfdisk /dev/mmcblk0 << EOF
> EOF
Checking that no-one is using this disk right now ...
OK

Disk /dev/mmcblk0: 62032 cylinders, 4 heads, 16 sectors/track
Old situation:
Units = cylinders of 32768 bytes, blocks of 1024 bytes, counting from 0

Device Boot Start End #cyls #blocks Id System
/dev/mmcblk0p1 0+ 62031 62032- 1985016 b W95 FAT32
/dev/mmcblk0p2 0 - 0 0 0 Empty
/dev/mmcblk0p3 0 - 0 0 0 Empty
/dev/mmcblk0p4 0 - 0 0 0 Empty
New situation:
No partitions found

sfdisk: no partition table present.
/home/user # mke2fs /dev/mmcblk0p1
mke2fs 1.37 (21-Mar-2005)
/dev/mmcblk0p1 is mounted; will not make a filesystem here!
/home/user # mount /dev/mmcblk0p1 /media/mmc1
/home/user # df -h
Filesystem Size Used Available Use% Mounted on
/dev/mtdblock4 4.0M 2.6M 1.4M 64% /mnt/initfs
none 512.0k 92.0k 420.0k 18% /mnt/initfs/tmp
/dev/mtdblock4 249.5M 170.1M 79.4M 68% /
none 512.0k 92.0k 420.0k 18% /tmp
none 1.0M 52.0k 972.0k 5% /dev
tmpfs 1.0M 0 1.0M 0% /dev/shm
/dev/mmcblk0p1 1.9G 16.0k 1.9G 0% /media/mmc2
/dev/mmcblk0p1 1.9G 16.0k 1.9G 0% /media/mmc1
/home/user #

quicksilver524 | # 393 | 2008-07-31, 19:52 | Report

after a reinstall of becomeroot i got this from entering what you asked

mrgreaper | # 394 | 2008-07-31, 19:54 | Report

i download install tools to documents
in app manager i choose to install from file
and ok the pop up
it starts to do its thing
after a few minutes i get the error all it says is unable to install install tools no useful error codes


log is attached (if i have done it right lol)

Attached Files

Log.txt (7.8 KB, 128 views)

fatalsaint | # 395 | 2008-07-31, 19:56 | Report

It apparantly already had it mounted on /media/mmc2... but no big deal as it's obvious the full 2.0 GB are there in a single partition.. which was the goal.

Don't know what to do tell you.. I cloned my SD to my internal 2GB card and it auto-formatted mine with 128MB FAT, 128MB swap, and 1.6GB or so ext2. I might recommend trying the advanced one that I linked earlier instead of the easy deb.. see if there are any failures during clone.sh..

Or attach your Application Manager log file so that we can see what the deb is doing.. right now with no errors or anything I'm at a loss.. And the fact that it formatted your card into a 800MB ext2 was completely confusing.

fatalsaint | # 396 | 2008-07-31, 19:59 | Report

mrgreaper - reboot your tabled and run it again.

quicksilver524 | # 397 | 2008-07-31, 20:11 | Report

when i go to attatch the file its twice the size of what this replay accepts, so i will move it to my computer, cut it in half and send it in peices

quicksilver524 | # 398 | 2008-07-31, 20:12 | Report

sorry reply accepts lol

fatalsaint | # 399 | 2008-07-31, 20:12 | Report

quicksilver did you clear it out first??

quicksilver524 | # 400 | 2008-07-31, 20:29 | Report

yes, i cleared it. could i just give you my email and then iemail it you, its not accepted from vista docx form into this post reply section (what the @#$%) lol