32GB SD adapter For N810 - Page 32 - maemo.org

craves1 | # 311 | 2009-01-13, 15:43 | Report

Originally Posted by superbondbond View Post

I received the kit today. The stainless steel back looks and fits great. One glitch I ran into was the T-5 torx driver included is too large. I'm trying to track down a T-4 to check, but they aren't readily available.

Craves (or anyone else), can you confirm the size of the torx screws on the n810?

The screw driver should be T-5 but it seems the manufacturer did not make all of them the same or they have T-6 mixed in with the shipment. Send me you address and I will send you a replacement.

The Following User Says Thank You to craves1 For This Useful Post:
superbondbond

craves1 | # 312 | 2009-01-13, 16:28 | Report

This is a message from jmbow

chester
i just want to let u know know that i got the complete kit for the nokia n810. its very nice and it work very will. the back cover fit perfectly with no problem. so i thank you very much for your effort to make our device even better.. to all people that doesnt have one you better grab one now before it run out. ...

can you do me a favor? can you post my message to internet tablet talk under ( 32gb for nokia n810) sorry i dont how to register......

thanks to you again and keep up good work..

jmbow

superbondbond | # 313 | 2009-01-13, 18:17 | Report

Originally Posted by craves1 View Post

The screw driver should be T-5 but it seems the manufacturer did not make all of them the same or they have T-6 mixed in with the shipment. Send me you address and I will send you a replacement.

The driver I received is stamped T-5 on the shaft, but it doesn't fit the screws. I think I have a T-6 at home somewhere to compare it against. I can't get a T-4 locally.

Thanks for your help.

craves1 | # 314 | 2009-01-13, 19:01 | Report

Originally Posted by superbondbond View Post

The driver I received is stamped T-5 on the shaft, but it doesn't fit the screws. I think I have a T-6 at home somewhere to compare it against. I can't get a T-4 locally.

Thanks for your help.

Send me you address and I will send you a T-5 that fits.

Thanks for the purchase.

The Following User Says Thank You to craves1 For This Useful Post:
superbondbond

superbondbond | # 315 | 2009-01-13, 20:22 | Report

Originally Posted by craves1 View Post

Send me you address and I will send you a T-5 that fits.

Thanks for the purchase.

Thanks, just e-mailed you.

When I was home at lunch I checked the T-5 I received from you against a T-6 I already had, and they seem to match. So I guess it's mis-labeled.

I'd be happy to send the first one back if you like. Just let me know.

Thanks again for following up on this.

torsen | # 316 | 2009-01-13, 20:30 | Report

Got mine today, didn't have instructions enclosed but it was very easy to fit.

This is a really nice peice of kit, and very well made.

Thanks for producing it, I am very happy with it

Cheers

nhanquy | # 317 | 2009-01-14, 04:07 | Report

I don't know how or why but I busted the screw head and the screw could not come out.

Anyway, I just glued the SDHC holder in and re-installed my 8G microSDC back with an adapter and the N810 worked perfectly!

Thanks craves1!

craves1 | # 318 | 2009-01-14, 05:19 | Report

Originally Posted by nhanquy View Post

I don't know how or why but I busted the screw head and the screw could not come out.

Anyway, I just glued the SDHC holder in and re-installed my 8G microSDC back with an adapter and the N810 worked perfectly!

Thanks craves1!

Thats a first. I have not had any other reports about getting the screw out. Glad you like it.

Thanks again for the purchase

craves1 | # 319 | 2009-01-15, 02:20 | Report

The 32GB Full Size SD adapter installation manual can be found here if you did not receive one in your kit

http://www.remotefactory.com/How%20t...%20adapter.pdf

Thanks

The Following 2 Users Say Thank You to craves1 For This Useful Post:
allnameswereout, superbondbond

Burnin TODI | # 320 | 2009-01-16, 02:11 | Report

Originally Posted by craves1 View Post

After reading this I decided to check the shippment of Torx screw drivers and there are a few that do not fit. It seems the manufacturer did not make them properly. The size is T-5 not T-4.

Send me a email with your address to cgraves256@optonline.net and I will send you one that fits.

Also some kits was shipped out without instruction sheets (about 10 kits) if this is the case for anyone send me a email and I will email a PDF file of the instructions.

Thanks again for the purchase

Thanks for making this product available....have it up and running!

NOTE: my N810 did need a T-4 torx and not a T-5, just in case others are having problems with theirs.

Thanks again