I dunno, troubleshootr, I've never seen nor used a N800....
As noted in my original post, I'm just contemplating one as an idea at this point...and realized that I needed to know if I'd be able to connect to internet at work if I want as this would help determine whether I'd look into a N800 further....
As for 3200, I think they're great lil' units...beautiful crisp, clear display and keyboard is much better than you'd would guess it would be...if they had built-in wifi and ethernet port they'd be perfect....but it's OK using my CF wifi and ethernet cards...
FWIW, I've reflashed my ROM with various distros available. Currently, quite happy with a pdaXrom variant called pdaXii13.....very good user community over at OESF.org/forums....they even have a small Nokia section there too...
But not as large or active as this one...mainly focused on Zaurii....
HTH,
Mark
Sorry Mark, I thought you had an 800 as well. I should have read the thread better . Thanks for your input on the Zaurus 3200. Sorry to post OT.
I use a small (cig. packet sized) wifi/ethernet adapter. It can work either as a little access point (plug it in the ethernet port and connect via wi-fi), or as a wi-fi adapter (plug it in the ethernet port on a computer and you now have a wi-fi interface). It can be powered either by a separate power unit, or from an USB port (usb-to-power cable).
A BT access point sounds like a good idea too, I was however just thinking about the N800 setup.. out of the box the wizard seems to want to connect to BT devices with a Phone profile only, so presumably you'll have to do the setup manually. But this could be the best solution for workplaces where you're not allowed to put a wi-fi AP onto their internal network (understandable!). BT devices are paired, after all, and class 2 devices have short range.
EDIT: Aha.. no N800.. so the wizard remark doesn't apply. Anyway my own Zaurus (old SL series) doesn't have BT at all.
or an Apple Airport Express. Both serve the same purpose. Of course they are a bit pricey solutions. But if you don't have a bluetooth phone with a data plan, this is a good solution.
I use a small (cig. packet sized) wifi/ethernet adapter. It can work either as a little access point (plug it in the ethernet port and connect via wi-fi), or as a wi-fi adapter (plug it in the ethernet port on a computer and you now have a wi-fi interface). It can be powered either by a separate power unit, or from an USB port (usb-to-power cable).
A BT access point sounds like a good idea too, I was however just thinking about the N800 setup.. out of the box the wizard seems to want to connect to BT devices with a Phone profile only, so presumably you'll have to do the setup manually. But this could be the best solution for workplaces where you're not allowed to put a wi-fi AP onto their internal network (understandable!). BT devices are paired, after all, and class 2 devices have short range.
EDIT: Aha.. no N800.. so the wizard remark doesn't apply. Anyway my own Zaurus (old SL series) doesn't have BT at all.
Thanks for all that info, TA-t3!
Would be nice to know what unit you have, who makes it, model....
As for Z's you can use BT adaptors with them..at least on SL-Cxxx/xxxx series...
or an Apple Airport Express. Both serve the same purpose. Of course they are a bit pricey solutions. But if you don't have a bluetooth phone with a data plan, this is a good solution.
Thanks, phi!
Just checked online and Linksys unit goes for about $80...nice design too...
The one I have is an earlier model, 330B. The only difference is that mine is 802.11b while the newer 330G model is 802.11g, and that my older model can function as a wi-fi bridge (repeater) as well. I haven't actually used that functionality, but it's meant for where e.g. the wi-fi in your hotel has a signal that is too weak when you're sitting outside on the veranda -- you could stretch the range a bit by leaving the pocket adapter in range of the hotel wi-fi and let it work as a repeater. Probably not as much used as the other two modes (AP and adapter), so they dropped it from the new model.
The one I have is an earlier model, 330B. The only difference is that mine is 802.11b while the newer 330G model is 802.11g, and that my older model can function as a wi-fi bridge (repeater) as well. I haven't actually used that functionality, but it's meant for where e.g. the wi-fi in your hotel has a signal that is too weak when you're sitting outside on the veranda -- you could stretch the range a bit by leaving the pocket adapter in range of the hotel wi-fi and let it work as a repeater. Probably not as much used as the other two modes (AP and adapter), so they dropped it from the new model.
Thanks for the follow-up info, TA-t3!! Appreciate it!