moved power button and device lock settings to their own pages
power button double-tap support and actions for secure and normal mode
lock and blank actions for the power button
increased power button long press from 1 second to 1.5 seconds, to match MCE
This release changes the names for the power_action and secure_power_action keys so you'll have go change them back from defaults.
Double-tap support is enabled by default which causes a one second delay before the power button reacts to single-taps. If MCE doesn't have a double-tap action and you don't want ASUI to have one then you can disable support.
New test binary, should be the last before I release 0.5.8 in a couple days. Restores autolock/stayslit settings on restart and blanking pause failure.
fix: charging point on battery graph only resets when capacity increases more than 1% above previous capacity
fix: bluetooth state is preserved when exiting flight mode
fix: don't show long tap marker or drain rate in charging runlevel
fix: power button key events are used instead of the HAL signal, long press will always work now
fix: don't display negative battery drain values
fix: blanking pause detection issue when blank and dim timeouts are identical
fix: overall UI throttling didn't use the 60 second limit for tap throttling, it does now
fix: restore autolock/stayslit settings on restart and blanking pause failure
fix: memory/swap tap markers were at the wrong horizontal position
fix: battery graph won't flip to landscape when opened from inverted landscape
fix: display short tap marker instead of long tap marker in upper lock buttons when split
changed 28% battery icon to all yellow
cosmetic changes to asui-settings main menu
an external shutdown (long press power button) now displays the "shutting down" dialog
statusbar applet plays charging and battery low sounds
setting to shutdown system when power button is long pressed and screen is locked
setting to prevent power button from blanking screen when locked, instead unlocks or asks for secondary unlock key
button to change system, keypad and touchscreen volumes
setting to split lock buttons in two halves so both actions can be handled with short taps instead of short and long taps
moved power button and device lock settings to their own pages
power button double-tap support and actions for secure and normal mode
lock and blank actions for the power button
ASUI reads longpress and double-tap delays from /etc/mce/mce.ini
MCE settings page to configure values in /etc/mce/mce.ini
moved tap markers inside flight mode buttons
changed screenshot long tap marker to an orange underline
added circular border around screenshot delay buttons
changed innerline color (dotted button borders) from #cccccc to #e3e3e3 for white theme
changed secondary selection color (long tap markers) from #ee6100 to #ee8a00 for white theme
moved long tap markers inside rotation button icons
aligned rotation icons
Bold items are new since last test binary.
Those who haven't been installing test binaries will need to reconfigure their power button settings because the old keys have been renamed.
If you have problems with the screen not blanking try restarting alarmd and then restart mce. If that doesn't work, stop alarmd, restart mce and then start alarmd. Should fix the problem without a reboot.
Not sure why but the statusbar applet doesn't restart when upgrading so be sure to turn it off and back on again.
Bah, sadly i forgot to check the blanking issue before i updated because now it has returned. Thing is that my N800 had run out of battery earlier, and when i plugged in the charger it booted but then "screen fade" rebooted.
going to try rebooting with alarmd disabled, and then rebooting again with it enabled to see if that shakes something "loose".
Edit: Crap, booting with alarmd disabled had no effect this time. Could it be related to some kind of charging issue?
edit2: bah, no change when booting with charger unplugged.
edit3: shutting down, inserting charger, letting the tablet boot into charging mode, then booting to full desktop made blanking work again. Funny enough the tablet came up with screen locked. Also, alarmd was disabled during all this. Now to enable and reboot.
edit4: blanking works after rebooting with alarmd enabled. But the ASUI battery meter seems a bit confused. It is displaying a 94.5% battery level...
