Cannot Flash EMMC - Page 3 - maemo.org

Duy2anh | # 21 | 2010-12-31, 01:14 | Report

Originally Posted by michaaa62 View Post

Try fsck after unmounting the partition. First find out the partition to check

Code:

mount

This will list every mounted partition and folder. Identify the partition mounted at /home/user/MyDocs, may be /dev/mmcblk0p1, the default.

The code lists a bunch of mounted things, among which:

/dev/mmcblk0p1 on /home/user/MyDocs

Originally Posted by

Unmount the partition

Code:

umount /dev/mmcblk0p1 #OrYourPartitonHere

With "#OrYourPartitonHere" is replaced by "/home/user/MyDocs"

Return:

"umount: cannot umount /dev/mmcblk0p1: invalid argument" without the quotes

Despite not being able to umount the partition, I proceed with this:

Originally Posted by

Check the file system

Code:

fsck -af /dev/mmcblk0p1

The "fsck" indentified some problems, did some autocorrection. The problems turn out to be because I play some games stored on the external memory card with DrNokSnes or iNES and stop in the middle when the phone froze.

Originally Posted by

Then, if everything goes well, mount it back to its place

Code:

mount /home/user/MyDocs -o rw

Everything goes back to normal. THANK YOU. YOU SAVE ME alot of time and troubles.

I will copy all games to the internal eMMC to play to avoid this error.

Should I convert all the /MyDocs partition to ext3 instead of Vfat to completely prevent this stupid read-only problems? I have a 16GB external memory card, which I think is enough to communicate with the Windows PC.

Last edited by Duy2anh; 2010-12-31 at 01:17.

pursueky | # 22 | 2011-03-16, 16:25 | Report

Originally Posted by tcbl50 View Post

dude i had a similar problem with the same error but i followed these instructions n i was able to flash emmc...

flasher-3.5 -F RX-51_2009SE_10.2010.19-1_PR_COMBINED_MR0_ARM.bin -f

change kernel with
flasher-3.5 -F RX-51_2009SE_1.2009.42-11_PR_COMBINED_MR0_ARM.bin' --flash-only=kernel -f

Restore emmc with vanilla
flasher-3.5 -F RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin' -f -R

hope it works for you

it failed to flash the emmc again after i reinstall the kernel

J4ZZ | # 23 | 2011-03-25, 15:57 | Report

Originally Posted by pursueky View Post

it failed to flash the emmc again after i reinstall the kernel

It's not reinstalling the kernel it's "changing the kernel"

Here's it how it works...

First of all you need two firmware images PR1.2 and PR1.3 for example

Code:

• PR1.3 = RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM

• PR1.2 = RX-51_2009SE_10.2010.19-1_PR_COMBINED_MR0_ARM

PR1.1.1 will work also...

Then you need a matching emmc image (PR1.3_original or a custom image file for bigger apps partition)

Code:

• PR1.3 RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin 

• 5GB Apps 24GB MyDocs:
http://www.mediafire.com/?j6srnaxwr3notaf 

• 8GB Apps 21GB MyDocs:
http://www.mediafire.com/?5o1hkuuwhn8hh1c

1. Flash PR1.3

Code:

flasher-3.5 -F RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin -f

2. Flash only Kernel of PR1.2

Code:

flasher-3.5 -F RX-51_2009SE_10.2010.19-1_PR_COMBINED_MR0_ARM.bin --flash-only=kernel -f

3. Flash your EMMC (custom or PR1.3)

Code:

flasher-3.5 -F RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin -f

4. Reflash PR1.3 firmware (see 1.) or try --flash-only=kernel but with the PR1.3 image (see 2.)

:cheers:

..::J4ZZ::..

Last edited by J4ZZ; 2011-04-10 at 14:11.

The Following User Says Thank You to J4ZZ For This Useful Post:
SNOFRI

andy2611 | # 24 | 2011-05-25, 05:54 | Report

Originally Posted by borland View Post

Hello
I've got a problem with my N900 that whole memory became ReadOnly. I cannot delete any files,I cannot format the storage, fsck does not find any problems, and I cannot connect it to PC in MassStorageDevice.
I cannot flash emmc as well I am getting the following Error when trying to do so:
Raw data transfer EP found at EP2.
SU_GET_UPDATE_STATUS_REQ terminated with error code 1.

The Flashing is done under WinXP Pro.

Anyone knows how solve this issue?

Hello Pal,

I have the exact problem as you had but my phone is now out of warranty,do you know the root cause of this problem and have you been able to figure out a solution other than replacing the phone?

karan9t1 | # 25 | 2011-05-28, 19:23 | Report

my device memory is corrupted
doesnt show any data
cannot access file manager
..i m worried.
can you help me?

karan9t1 | # 26 | 2011-05-28, 19:28 | Report

Originally Posted by ivyking View Post

ouch ! can't flash.. this hurts ! may I know how are you flashing in details ? you may be doing something wrong .

does maemo still boot ?

my phone's inbuilt 32gb memory is corrupted
no data no access to file manager
memry status shows memory corrupted.
can you help me fixing this problem
i m worried

gabby131 | # 27 | 2011-06-17, 13:00 | Report

okay, i was once having a challenge flashing n900 emmc but yesterday, i surprisingly made it using windows 7 with windows xp virtual machine. and after flashing, installing/restoring apps, nitdroid, and CSSU etc, i noticed that my n900 seems faster than before. that was my first time of flashing the eMMC and wondering if i did something wrong before i flash that I feel some pain using my n900. the device is not yet OC'd but it feels like its on 850mhz.

Lasher | # 28 | 2011-09-27, 11:19 | Report

Ive been at this for a few hours now. It will simply NOT install eMMC. I have tried flashing different vanilla.bin 's and relevant eMMC's after. When it does boot the Mydocs etc is not visible when I run 'mount' in Xterm. I've even tried rescue kernel and initrd rpm from my ubuntu laptop and was unable to even see the disk in Gparted. Is the memory gone? arent the rootfs and mydocs just partitions on the same flash storage not seperate? it should be possible to just wipe the lot and start over like any other flash disk shouldnt it? I want to cry lol. I love my n900.

:EDIT

As a last resort after one more try changing the kernal as suggested by J4ZZ i will try to use my 8gb memory stick as the home/mydocs and see how it goes from there

Last edited by Lasher; 2011-09-27 at 11:26. Reason: mmc /home

jochga | # 29 | 2012-05-29, 16:40 | Report

My device is corrupt can you help me?

MINKIN2 | # 30 | 2012-05-29, 17:11 | Report

Originally Posted by jochga View Post

My device is corrupt can you help me?

Can you give a more detailed description of "corrupt"? There are a lot of helpful people here but we would need to have some idea of what proplems you are facing

Also, what device are you using?

The Following User Says Thank You to MINKIN2 For This Useful Post:
jochga