Notices

@ geekygens

if ur problem is that u have notification that sd card is damaged , u need only to go to settings , storage and choose mount SD card .

but if android can't see it , u can find solution in this topic
forum.nitdroid.com/index.php?topic=1051.0

read my posts and u will find the answer

@ arnest

MyDocs = N900 when connected to pc

i think u copied files to documents when u connect it to pc

u should know that there is documents and MyDocs

documents is folder inside MyDocs

I try to mount MyDocs/SD Card under settings>storage and it goes from preparing the sd card to you can take it out or whatever it says to damaged sd card and no data value in available memory is showing for this area and your custom Gingerbread OS is stored in /dev/mmcblk0p5 /and and is on a logical parition with a ext3 format and under a extended partition.

@ geekygenes

i told u that u can find solution here
http://forum.nitdroid.com/index.php?topic=1051.0

read all my posts in this thread and u will find everything u need

I didn't find a solution for this only if I was using an external sd card.
What I miss?
Thanks in advance!

I don't have an actual MicroSD and Its the mounting of MyDocs or MicroSD as it reads in your custom Gingebread OS that is failing and will not mount and comes up damaged.

i think u don't read it carefully


i want u to know that the problem is ( u have mmcblk0p4 extended and mmcblk0p5 and mmcblk0p6 as logical partitions )

ur patition table is the problem not custom Gingerbread

if u want it to work u can partition it again and delete mmcblk0p6
or another solution is to add real SD card

So I can only have emmc install and mmcblk0p5 install.
That's odd because I have had Gingerbread and Nitdroid 0.09 running on two seperate paritions fine.

again u don't concentrate in my words


i have gingerbread on mmcblk0p5

and froyo 2.2.1 on mmcblk0p6

i.e my partition table is the same as u so i put real SD card to gingerbread

i didn't say that u can't install it

i told u that the problem of SD card in gingerbread occurs only when u have mmcblk0p4 as extended partitionn and have 2 logical partitions inside it as mmcblk0p5 and mmcblk0p6


and u can read this in the topic

so i told u that u have 2 choices : delete partition to have MyDocs mounted without problems

or

put real SD card and follow istructions i wrote in the thread to make it work

I found a way around it
I deleted the mmcblk0p5 and mmcblk0p6 logical partitions and created three new logical partitions and I made the 5th partition or should I say mmcblk0p5 1mb in size and then I created two more partitions aka mmcblk0p6 and mmcblk0p7 and I mounted your OS on mmcblk0p6 and the original gingerbread OS on mmcblk0p7 and so far all is good