i install speed and battery patch .deb, and got a lot of reboot: last cssu, power kernel 48. i uninstall batterypatch and it's ok.
But the battery drain fast. Something like six hours.
don't use the .deb versions they are very old
just install the patches from HAM or FAM or
apt-get install batterypatch speedpatch
@zurrain101
there are custom profiles (overclock, underclock) buut they have the same voltages as the default profile
so i avoid reboots
@ ALL
what's in the newest batterypatch:
When device is locked : or system is inactive
while the keyboard is closed
1-) vfs_cache goes to 10
2-) multiple processes are paused (which are known to use CPU in standby)
3-) change to underclock profile which has vdd1 vdd2 enabled powersavebias=20 (but with the stock voltages)
When the device is unlocked or brightness is on
doesn't require the keyboard to be opened
1-) vfs goes back to 100
2-) overclock profile is loaded which has vdd2 and conservative mode with powersavebias=20
3-) the multiple processes are started again
PS: if you are downloading or installing something which takes a long time and you locked the screen while you don't want batterypatch gets activated
and you don't want to make N900 slow in standby
just open the keyboard and lock the screen
then nothing happens if N900 is in standby (while keyboard is opened)
and if you are done simply close the keyboard and lock the screen so the batterypatch gets activated
don't use the .deb versions they are very old
just install the patches from HAM or FAM or
apt-get install batterypatch speedpatch
@zurrain101
there are custom profiles (overclock, underclock) buut they have the same voltages as the default profile
so i avoid reboots
@ ALL
what's in the newest batterypatch:
When device is locked : or system is inactive
while the keyboard is closed
1-) vfs_cache goes to 10
2-) multiple processes are paused (which are known to use CPU in standby)
3-) change to underclock profile which has vdd1 vdd2 enabled powersavebias=20 (but with the stock voltages)
When the device is unlocked or brightness is on
doesn't require the keyboard to be opened
1-) vfs goes back to 100
2-) overclock profile is loaded which has vdd2 and conservative mode with powersavebias=20
3-) the multiple processes are started again
PS: if you are downloading or installing something which takes a long time and you locked the screen while you don't want batterypatch gets activated
and you don't want to make N900 slow in standby
just open the keyboard and lock the screen
then nothing happens if N900 is in standby (while keyboard is opened)
and if you are done simply close the keyboard and lock the screen so the batterypatch gets activated
Is this good to use stock voltages? Maybe You could try the LV ones. They are lower than stock but still work ok.
this is what i have got so far
started @ 9am with 94%
11am 90% mass texts and browsing
12pm 83% mass texts and browsing
2pm 76% not used
3pm 73% texts
4pm 73% texts and calls
5pm 69% texts.
6pm 66% uploading images and browsing
not very accurate but you get the drift.
you can tell on battery graph the difference with today's and previous day's
nice one cheers