Page 2 of 6 1 2 34 Last »
Reply
Thread Tools
jedi's Avatar
jedi is offline jedi
2011-10-05 , 11:17
Posts: 1,411 | Thanked: 1,330 times | Joined on Jan 2010 @ Tatooine
#11
Originally Posted by janour View Post
omg ok let us start from the beging i have the flasher 3.5 in my comp so i should go to this link http://tablets-dev.nokia.com/nokia_N900.php and what i shoul downold after i put my imei just give me the names of the tow folder plllz
Please read this: http://wiki.maemo.org/Updating_the_firmware - and also have a browse around the wiki as you'll find lots of your questions are already answered...
__________________
May the source be with you.
 

The Following 3 Users Say Thank You to jedi For This Useful Post:
janour is offline janour
2011-10-05 , 11:28
Posts: 42 | Thanked: 2 times | Joined on Oct 2011
#12
ok im downloading the last version of vanilia

after finishing i have to put this inside the flasher folder right ?

so i have there the emmc and the RX-51_2009SE_20.2010.36-2.003_PR_COMBINED_003_ARM(1) together right ?

so i open the the command pronpt and i give the order to open the flasher ok

after that which one i put to make flashing first (the emmc ) first or the second one ?

im so sory but im so confused that's my first time and im not exeprt i hope that u have patient
 
knobby is offline knobby
2011-10-05 , 11:35
Posts: 159 | Thanked: 68 times | Joined on Sep 2011 @ India
#13
Originally Posted by janour View Post
ok im downloading the last version of vanilia

after finishing i have to put this inside the flasher folder right ?

so i have there the emmc and the RX-51_2009SE_20.2010.36-2.003_PR_COMBINED_003_ARM(1) together right ?

so i open the the command pronpt and i give the order to open the flasher ok

after that which one i put to make flashing first (the emmc ) first or the second one ?

im so sory but im so confused that's my first time and im not exeprt i hope that u have patient
yes u r right ... go on ..
r u using windows...?
 
janour is offline janour
2011-10-05 , 11:38
Posts: 42 | Thanked: 2 times | Joined on Oct 2011
#14
yes i have Xp
but u did not answer me wich one i choose first the frimeware or the second on when i satrat to make reflashing ?
 
knobby is offline knobby
2011-10-05 , 11:40
Posts: 159 | Thanked: 68 times | Joined on Sep 2011 @ India
#15
Originally Posted by janour View Post
yes i have Xp
but u did not answer me wich one i choose first the frimeware or the second on when i satrat to make reflashing ?
i always start from emmc but really doesn't matter...
 
janour is offline janour
2011-10-05 , 11:53
Posts: 42 | Thanked: 2 times | Joined on Oct 2011
#16
ok thank u so much knobby ill try and we will see i hope it will be ok but thanks alot dude
 
ziggadebo is offline ziggadebo
2011-10-05 , 11:55
Posts: 99 | Thanked: 36 times | Joined on Mar 2010
#17
Right.

Flash the emmc first

Run this command in the flasher

PHP Code:
flasher-3.5.exe -F EMMC -f 
(This assmumes you renamed your emmc file 'EMMC')

When this finishes( 30secs to 5 mins) remove the battery from your mobile.

Then reconnect to pc holiding down the U key.

Then flash the firmware

Run this command in flasher

PHP Code:
flasher-3.5.exe -F FIRMWARE.bin -f -R 
(This assumes you renamed your firmware file 'FIRMWARE')

When it's finished the phone will reboot and voila you have a newly flashed and operational phone.

This is all in the WIKI as previously pointed out, but the above should summarise what you need to do.
Last edited by ziggadebo; 2011-10-05 at 12:08. Reason: typo. Thx knobby
 

The Following User Says Thank You to ziggadebo For This Useful Post:
knobby is offline knobby
2011-10-05 , 12:04
Posts: 159 | Thanked: 68 times | Joined on Sep 2011 @ India
#18
Originally Posted by ziggadebo View Post
Right.

Flash the emmc first

Run this command in the flasher

PHP Code:
flasher-3.5.exe -F EMMC -f 
(This assmumes you renamed your emmc file 'EMMC')

When this finishes( 30secs to 5 mins) remove the battery from your mobile.

Then reconnect to pc holiding down the U key.

Then flash the firmware

Run this command in flasher

PHP Code:
flasher-3.5.exe -F FIRMWARE-f -R 
(This assumes you renamed your firmware file 'FIRMWARE')

When it's finished the phone will reboot and voila you have a newly flashed and operational phone.

This is all in the WIKI as previously pointed out, but the above should summarise what you need to do.
its a typo i think so....it must be.

flasher-3.5.exe -F FIRMWARE.bin -f -R


and remember type as written...as command window is case sensitive..
 

The Following User Says Thank You to knobby For This Useful Post:
demolition is offline demolition
2011-10-05 , 12:08
Posts: 560 | Thanked: 422 times | Joined on Mar 2011
#19
@janour
Thanks for making your font normal size at last. Now, please have a look through the answers and if any were helpful: press the Thanks button.

If you're flashing both, always do the emmc first and do Not allow device to boot until the fiasco image has been flashed.

Roughly speaking:
The eMMC is the main internal storage. You shouldn't need to wipe/reset/flash this unless you sell your device or for whatever other reason find it gets full or somehow (e.g. -devel s/w) corrupted.
i.e. it sets/resets everything in the /home and /opt folders

The FIASCO image sets/resets the rootfs (/root) and I think some of the other top level ones too (Someone please clarify). This is the one to use if you just need to clear out unwanted or faulty s/w, though you may need to go through /home or /opt to remove settings folders from software you've removed by flashing the device.
 

The Following 4 Users Say Thank You to demolition For This Useful Post:
janour is offline janour
2011-10-05 , 13:01
Posts: 42 | Thanked: 2 times | Joined on Oct 2011
#20
ok i start from the emmc and that what i got :
sw versin in image : RX-51_2009SE_20.2010.36-2.003_pr_003
image 'kernel',size 1705kb
version 2.6.28-201030103+0m5
image 'rootfs', size 185856 kb
version RX-51_2009SE_20.2010.36-2.003_PR_003
fiasco subimage data length mistach


what alll taht mean ???
 

The Following User Says Thank You to janour For This Useful Post:
Reply
Page 2 of 6 1 2 34 Last »

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 23:05.

Contact Us - Home - Archive - Top