F2thaK | # 31 | 2012-01-16, 23:21 | Report

I did it on my N9 and got that warning

marrat | # 32 | 2012-01-17, 10:08 | Report

As soon as my newly-ordered Cyan N9 arrives (in addition to my current black one) the first thing I will do before powering it on is to flash PR1.1 image + Open Mode kernel!

That way I can provide "real-world" testing of Open Mode from day one to the community :-)

EDIT: should I use the patched kernel or the unmodified open mode kernel?

And after flashing complete PR1.1 with original kernel, closed mode is there again as usual, I assume?

---

Last edited by marrat; 2012-01-17 at 10:24.

mscion | # 33 | 2012-01-17, 13:08 | Report

Qole, marrat and anyone else, for the sake of the community, please wear protective gloves and goggles before flashing to Open Mode kernel...

marrat | # 34 | 2012-01-17, 13:10 | Report

I will keep your advise in mind when I press Enter at the flasher command prompt

wicket | # 35 | 2012-01-17, 13:24 | Report

Flashing your own kernel also gives you the ability to overclock which will significantly shorten the life of your device. I suspect the only way Nokia can check to see if you may have overclocked your device is to check if you have ever installed an unofficial kernel.

The solution to this would be for Nokia to provide a signed open-mode kernel. Perhaps someone could raise a bug to address this?

---

Last edited by wicket; 2012-01-17 at 19:54.

jalyst | # 36 | 2012-01-17, 18:55 | Report

This is gathering steam, glad to see more folks jumping on board!
As soon as the White N9s available in my country I intend to "dip my toe" ;-P

admiral0 | # 37 | 2012-01-17, 19:41 | Report

+1 lurking from FMC times

merlin1991 | # 38 | 2012-01-17, 23:50 | Report

got it here on the n9

but I also have no problem with aegisfs (did erase user data with flasher prior to flashing) and I flashed like this

Makeclick | # 39 | 2012-01-18, 20:21 | Report

m'kay! I got boot loop and i try to flash only kernel from orginal fiasco (flasher -f --flash-only=kernel -F orginalfirmware.bin) and i got that same message! why? is that illegal to flash only kernel?? Is that some sort auto message? Must refalsh all of fiasco... again, i do not want to lose my warranty..

marrat | # 40 | 2012-01-19, 08:45 | Report

Just flashed PR1.1 and unpatched Open Mode kernel on my fresh Cyan N9. Phone is booting now, so let's see

EDIT: Reinstall authorised Operating System! Not booting...

With original kernel, no problem...

OK, tried the same again, now it's working with unpatched Open Mode kernel. I will post my experiences here.

---

Last edited by marrat; 2012-01-19 at 09:15.