Page 81 of 156 « First 717980 81 828391 Last »
Reply
Thread Tools
panorton is offline panorton
2013-05-22 , 21:48
Posts: 29 | Thanked: 2 times | Joined on Feb 2013
#801
I restarted the computer and it finds the phone again. I flashed with the Germain firmware and it's the very same.
 
panorton is offline panorton
2013-05-22 , 22:20
Posts: 29 | Thanked: 2 times | Joined on Feb 2013
#802
Progress. When I flash the phone with the German firmware I can start the phone, it takes a while. It has no wifi and there is a problem with sim card message appears at the start. There are no maps but the camera works and the phone stays on. If I then flash the old_main I get back to boot loop. I'm now downloading a new Chineese firmware and I'll use this as an Old_main.bin and do a cmt oly flash. Fingers crossed.
 
panorton is offline panorton
2013-05-22 , 23:13
Posts: 29 | Thanked: 2 times | Joined on Feb 2013
#803
Unfortunately I'm back where I started. Phone boots as far as the Nokia logo and starts all over again. What did I do to deserve this phone.
 
suyog is offline suyog
2013-05-23 , 13:30
Posts: 131 | Thanked: 22 times | Joined on Sep 2012 @ India
#804
Originally Posted by panorton View Post
Unfortunately I'm back where I started. Phone boots as far as the Nokia logo and starts all over again. What did I do to deserve this phone.
Try flashing german fw and then try cmt flash only from fw for product code mentioned on sim tray. If that doesnt help then only use chinese as last resort.
Let me know how it goes.
 
panorton is offline panorton
2013-05-23 , 22:15
Posts: 29 | Thanked: 2 times | Joined on Feb 2013
#805
Originally Posted by suyog View Post
Try flashing german fw and then try cmt flash only from fw for product code mentioned on sim tray. If that doesnt help then only use chinese as last resort.
Let me know how it goes.
I've done all that time and time again. The phone starts after a main.bin flash. It reports errors pipe 7 I think. I've no mobile network, no wifi no maps. I do have camera and bluetooth. Then I flash old_main.bin which matches the product code and the phone won't start. The product code is Chineese
Last edited by panorton; 2013-05-23 at 22:17.
 
panorton is offline panorton
2013-05-23 , 22:16
Posts: 29 | Thanked: 2 times | Joined on Feb 2013
#806
Sorry for sounding so despondent.
 
suyog is offline suyog
2013-05-24 , 14:07
Posts: 131 | Thanked: 22 times | Joined on Sep 2012 @ India
#807
Originally Posted by panorton View Post
Sorry for sounding so despondent.
I can understand as I also faced same problem and felt very helpless because it is not cheap phone.
Also downloading these huge fw files consumes lots of data.

But Can you try to download UAE fw and check? It have higher version number than german. I am suggesting this because you can at least try to get phone working in such condition that you can see wlan and bluetooth id and no longer sim error while startup.
This will allow you to use it for all functions except telephony.
 
panorton is offline panorton
2013-05-25 , 01:40
Posts: 29 | Thanked: 2 times | Joined on Feb 2013
#808
Originally Posted by suyog View Post
I can understand as I also faced same problem and felt very helpless because it is not cheap phone.
Also downloading these huge fw files consumes lots of data.

But Can you try to download UAE fw and check? It have higher version number than german. I am suggesting this because you can at least try to get phone working in such condition that you can see wlan and bluetooth id and no longer sim error while startup.
This will allow you to use it for all functions except telephony.
I tried that but it's the very same.
 
suyog is offline suyog
2013-05-27 , 20:46
Posts: 131 | Thanked: 22 times | Joined on Sep 2012 @ India
#809
Anyone can help me further to know what is exactly causing this issue?

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1601
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3.480.04.1_PR_480
Sending ape-algo image (7103 kB)...
100% (7103 of 7103 kB, avg. 18450 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1601
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_40.2012.21-3.418.2_PR_418
Image cert-sw skipped
Image xloader skipped
Image secondary skipped
Image kernel skipped
Image moslo skipped
Image rootfs skipped
Image mmc skipped
Image tar skipped
Image config skipped

Battery level 79 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[_] cmt-mcusw [finishing 75 % 6050 / 6050 kB 3390 kB/s]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[x] cmt-algo [finished 100 % 789 / 789 kB NA ]
[f] cmt-mcusw [finishing 0 % 6050 / 6050 kB 3390 kB/s]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
MTC_POWER_OFF not received
CMT RFS failed
[Pipe 2] Finishing in error state with status 1
========================================

ERROR: Failed to flash images
 
rswelter is offline rswelter
2013-05-28 , 06:19
Posts: 87 | Thanked: 7 times | Joined on Apr 2013
#810
I am just guessing here, but did you have developer mode on before flashing?
 
Reply
Page 81 of 156 « First 717980 81 828391 Last »

Tags
flashing, nokia n9

« Previous Thread | Next Thread »
Thread Tools

 
Forum Jump


All times are GMT. The time now is 08:13.

Contact Us - Home - Archive - Top