|
#1
|
|||
|
|||
|
Kernel-power version v51 is now in this thread.
Kernel-power version v50 is now in Extras! Update (from old version): Use Hildon Application Manager or via apt-get Installation: From download page: https://maemo.org/downloads/product/...-power-flasher Or in Hildon Application Manager install package: Linux kernel for power user Or via apt-get package: kernel-power-flasher Overclock support (optional): From download page: https://maemo.org/downloads/product/...power-settings Or in Hildon Application Manager install package: Linux kernel for power user (settings and overclock) Or via apt-get package: kernel-power-settings Multiboot support (optional): In Hildon Application Manager install packages: Maemo ULTimate BOOTloader and Linux kernel for power user (boot image for multiboot) Or via apt-get packages: multiboot and kernel-power-bootimg U-Boot support (optional): First from U-Boot for Nokia RX-51 with BootMenu thread install needed U-Boot packages. Then in Hildon Application Manager install package Linux kernel for power user (boot image for multiboot) Or via apt-get package kernel-power-bootimg Packet injection wifi driver (optional): Source code and compiled driver for >= v50 is in this post: http://talk.maemo.org/showpost.php?p...&postcount=458 Uninstallation: Multiboot and overclock support can be uninstalled via Hildon Application Manager or via apt-get. Uninstalling kernel image is possible only via menu entry "Nokia Kernel". NEVER UNINSTALL KERNEL POWER PACKAGES!!! IT CAN MAKE YOUR DEVICE UNBOOTABLE. === Changelog: kernel-power (1:2.6.28-10power50) fremantle; urgency=low . * Fixed reboot problem * Added option (sysfs entry) to disable indicator led * Enabled module xt_owner * Fixed scheduling while atomic bugs * efuse calibrations are re-calculated - using linear approximation instead of hard-coded increments * Fixed camera driver to use framebuffer memory for video-capture buffer (DMA to framebuffer) * Enabled cdrom drivers * Disabled verbose power_supply messages * Notify about changed musb mode * Disabled mesh network (kernel sometimes crashed) * Fixed the famous BT headset disconnecting issue * Upstream patch: Bluetooth: Fix potential bad memory access with sysfs files * Disabled errata 430973 * If FM transmitter is locked do not show error message when trying to change power level * Fixed oops in g_ether with windows * kernel-power-bootimg package now working with U-Boot Bootmenu too -- Pali Rohár <hidden> Wed, 14 Mar 2012 19:43:04 +0100 === For questions about development, bugs, etc... write to thread [Development] kernel-power on http://talk.maemo.org/showthread.php?t=78371 Here is also information how to compile kernel, send patches, ... Last edited by pali; 2012-07-23 at 16:25. |
|
#2
|
|||
|
|||
|
No more red LED, YIPPEE!
__________________
N900: One of God's own prototypes. A high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die.
|
| The Following 3 Users Say Thank You to vi_ For This Useful Post: | ||
|
#3
|
||||
|
|
||||
|
update it, and its great, thx so much, my N900 will never feel thats 'old',
__________________
~$ ~# |
|
#4
|
||||
|
||||
|
thanks for the update. flash my device and update it then will create a backup menu backup.
Last edited by panjgoori; 2012-03-19 at 10:30. |
|
#5
|
||||
|
||||
|
Thnx for the update!
Love to see that people still care their N900 |
| The Following User Says Thank You to HtheB For This Useful Post: | ||
|
#6
|
|||
|
|||
|
|
|
#7
|
|||
|
|||
|
bleeding edge drivers don't want to load
![]() edit: nevermind i was too quick Last edited by dhbiker; 2012-03-19 at 10:49. |
|
#8
|
|||
|
|||
|
Try to modprobe -f. Drivers are compiled agains pre v50 version. lxp must recompile it against released v50 to avoid problems...
|
| The Following User Says Thank You to pali For This Useful Post: | ||
|
#9
|
|||
|
|||
|
works fine for me!!
|
|
#10
|
|||
|
|||
|
Please anyone who has not enabled SR, to do a little experimenting with default and dsp profiles and to confirm/not if SR is stable and how is the battery life with SR. Also if you have your own undervolting profile, I will appreciate a comparison between your manually tuned voltages and SR calculated. SR should be rock stable in KP50, but I need a confirmation.
Note: Have in mind that if you have your own undervolting profile, SR would not make battery life better, at least not much. |
| The Following 3 Users Say Thank You to freemangordon For This Useful Post: | ||
![]() |
| Tags |
| battery test, i <3 fmg, i <3 pali, igottaboner, kernel, kernel-power, viva fmg, viva pali |
|
|