![]() |
2012-09-06
, 00:39
|
Posts: 54 |
Thanked: 8 times |
Joined on Nov 2009
|
#2
|
![]() |
2012-09-06
, 02:08
|
Posts: 54 |
Thanked: 8 times |
Joined on Nov 2009
|
#3
|
![]() |
2012-09-06
, 05:57
|
Posts: 2,102 |
Thanked: 1,937 times |
Joined on Sep 2008
@ Berlin, Germany
|
#4
|
![]() |
2012-09-06
, 07:00
|
Posts: 1 |
Thanked: 0 times |
Joined on Jul 2012
|
#5
|
Here is what I run and the error I get. One caveat, if I run sudo ./flasher-3.5 -r RX-51_2009SE_2
0.2010.36-2.002_PR_COMBINED_002_ARM.bin -f -R it works. I just downloaded two copies yesterday from the link on the wiki site "Updating the tablet firmware". Any suggs?
[jpwhite@newkid maemo_flasher-3.5_2.5.2.2]$ sudo ./flasher-3.5 -F RX-51_2009SE_20.2010.36-2.002_PR_COMBINED_002_ARM.bin -f -R
[sudo] password for jpwhite:
flasher v2.5.2 (Oct 21 2009)
SW version in image: RX-51_2009SE_20.2010.36-2.002_PR_002
Image 'kernel', size 1705 kB
Version 2.6.28-20103103+0m5
Image 'rootfs', size 185856 kB
Version RX-51_2009SE_20.2010.36-2.002_PR_002
FIASCO subimage data length mismatch
[jpwhite@newkid maemo_flasher-3.5_2.5.2.2]$
Here is the command when it works:
[jpwhite@newkid maemo_flasher-3.5_2.5.2.2]$ sudo ./flasher-3.5 -r RX-51_2009SE_2
0.2010.36-2.002_PR_COMBINED_002_ARM.bin -f -R
flasher v2.5.2 (Oct 21 2009)
Suitable USB device not found, waiting.
The -r switch for Flasher, means you are flashing a root JFFS2 image. Or at least that is what I gather from the Flasher help.
This is my first time flashing so I am kind of at a loss. Any help is much appreciated as I plan on doing my n9 once I get the hang of this flashing stuff :-)
www.itanalysts.net
www.whiteslimo.com
Last edited by jpaulwhite; 2012-09-06 at 00:47.