[Commercial] Rockwatch - Pebble smart watch support for the N9 - Page 14 - maemo.org

Active Topics

HDMI with Leste (1)
to Maemo 7 / Leste by teroyk - 1 day, 12 hrs ago
Firefox with Leste (9)
to Maemo 7 / Leste by teroyk - 3 days, 14 hrs ago
more...

Page 14 of 24

Thread Tools

	Alexxxl	2013-12-22 , 11:23
	Posts: 152 \| Thanked: 91 times \| Joined on Mar 2013 @ Russia Saratov	#131

I realized this command shows the last incoming / outgoing call.
but does not show the fact of the call at the moment

Quote & Reply |

	Alexxxl	2013-12-22 , 16:17
	Posts: 152 \| Thanked: 91 times \| Joined on Mar 2013 @ Russia Saratov	#132

some ideas ...

script informs on connecting / disconnecting the charger

notifies the charge reaches 70% 50% 30% 20% 10% 5%

will soon be additional functionality

Code:

#!/bin/bash
status=$(hal-get-property --udi /org/freedesktop/Hal/devices/bme --key maemo.charger.connection_status)
echo $status > /home/user/MyDocs/status.log
echo "no" > /home/user/MyDocs/level.log
echo "no" > /home/user/MyDocs/level1.log
echo "no" > /home/user/MyDocs/level2.log
echo "no" > /home/user/MyDocs/level3.log
echo "no" > /home/user/MyDocs/level4.log
echo "no" > /home/user/MyDocs/level5.log
#Создаем первоначальный лог

source /tmp/session_bus_address.user
while true
do


# #############################charge on/off###################################

status=$(hal-get-property --udi /org/freedesktop/Hal/devices/bme --key maemo.charger.connection_status)
log=$(cat /home/user/MyDocs/status.log)
if [[ "$status" == "$log" ]]; then
:
else
if [[ "$status" == "connected" ]]; then
qdbus com.mikeasoft.rockwatch /rockwatch showSMS "N9" "Charge Connected!"
echo $status > /home/user/MyDocs/status.log
else
qdbus com.mikeasoft.rockwatch /rockwatch showSMS "N9" "Charge disconnected!"
echo $status > /home/user/MyDocs/status.log
fi
fi
 
# ########################## charge level 70%##################################

level=$(hal-get-property --udi /org/freedesktop/Hal/devices/bme --key battery.charge_level.percentage)
levellog=$(cat /home/user/MyDocs/level.log) 
	if [[ "$level" == "70" ]]; then
		if [[ "$levellog" == "ok" ]]; then
		:
			else
			qdbus com.mikeasoft.rockwatch /rockwatch showSMS "N9" "Charge level 70%"
			echo "ok" > /home/user/MyDocs/level.log
     		fi
     else
     echo "no" > /home/user/MyDocs/level.log
	fi
 
 
# ########################## charge level 50%##################################

level1=$(hal-get-property --udi /org/freedesktop/Hal/devices/bme --key battery.charge_level.percentage)
levellog1=$(cat /home/user/MyDocs/level1.log) 
	if [[ "$level1" == "50" ]]; then
		if [[ "$levellog1" == "ok" ]]; then
		:
			else
			qdbus com.mikeasoft.rockwatch /rockwatch showSMS "N9" "Charge level 50%"
			echo "ok" > /home/user/MyDocs/level1.log
     		fi
     else
     echo "no" > /home/user/MyDocs/level1.log
	fi
 

# ########################## charge level 30%##################################

# charge level 30%
level2=$(hal-get-property --udi /org/freedesktop/Hal/devices/bme --key battery.charge_level.percentage)
levellog2=$(cat /home/user/MyDocs/level1.log) 
	if [[ "$level2" == "30" ]]; then
		if [[ "$levellog2" == "ok" ]]; then
		:
			else
			qdbus com.mikeasoft.rockwatch /rockwatch showSMS "N9" "Charge level 30%"
			echo "ok" > /home/user/MyDocs/level2.log
     		fi
     else
     echo "no" > /home/user/MyDocs/level2.log
	fi
 



# ########################## charge level 20%##################################

level3=$(hal-get-property --udi /org/freedesktop/Hal/devices/bme --key battery.charge_level.percentage)
levellog3=$(cat /home/user/MyDocs/level1.log) 
	if [[ "$level3" == "20" ]]; then
		if [[ "$levellog2" == "ok" ]]; then
		:
			else
			qdbus com.mikeasoft.rockwatch /rockwatch showSMS "N9" "Charge level 20%"
			echo "ok" > /home/user/MyDocs/level3.log
     		fi
     else
     echo "no" > /home/user/MyDocs/level3.log
	fi


# ########################## charge level 10%##################################

level4=$(hal-get-property --udi /org/freedesktop/Hal/devices/bme --key battery.charge_level.percentage)
levellog4=$(cat /home/user/MyDocs/level1.log) 
	if [[ "$level4" == "10" ]]; then
		if [[ "$levellog2" == "ok" ]]; then
		:
			else
			qdbus com.mikeasoft.rockwatch /rockwatch showSMS "N9" "Charge level 10%"
			echo "ok" > /home/user/MyDocs/level4.log
     		fi
     else
     echo "no" > /home/user/MyDocs/level4.log
	fi

# ########################## charge level 5%##################################

level5=$(hal-get-property --udi /org/freedesktop/Hal/devices/bme --key battery.charge_level.percentage)
levellog5=$(cat /home/user/MyDocs/level1.log) 
	if [[ "$level5" == "5" ]]; then
		if [[ "$levellog2" == "ok" ]]; then
		:
			else
			qdbus com.mikeasoft.rockwatch /rockwatch showSMS "N9" "Charge level 5% LOW POWER!!!"
			echo "ok" > /home/user/MyDocs/level5.log
     		fi
     else
     echo "no" > /home/user/MyDocs/level5.log
	fi




sleep 1
done

Last edited by Alexxxl; 2013-12-24 at 10:42.

Quote & Reply |

	Alexxxl	2013-12-22 , 21:45
	Posts: 152 \| Thanked: 91 times \| Joined on Mar 2013 @ Russia Saratov	#133

another script monitors the status of your internet connection, and informs when connecting ... GPRS / wlan, connected / disconnected:

Code:

#!/bin/bash


echo "-" > /home/user/MyDocs/wifi_log.log


source /tmp/session_bus_address.user
while true
do


name_wifi=$(qdbus --system com.nokia.icd2.context /org/maemo/contextkit/Internet/NetworkName org.maemo.contextkit.Property.Get | sed q)
status_wifi=$(qdbus --system com.nokia.icd2.context /org/maemo/contextkit/Internet/NetworkState org.maemo.contextkit.Property.Get | sed q)
wifi_log=$(cat /home/user/MyDocs/wifi_log.log)
lan=$(qdbus --system com.nokia.icd2.context /org/maemo/contextkit/Internet/NetworkType org.maemo.contextkit.Property.Get | sed q)

if [[ "$status_wifi" == "connected" ]]; then
          if [[ "$status_wifi" == "$wifi_log" ]]; then
          :
          else     
          qdbus com.mikeasoft.rockwatch /rockwatch showSMS "N9" "$lan ""$name_wifi ""$status_wifi"
          echo $status_wifi > /home/user/MyDocs/wifi_log.log
	   echo $name_wifi > /home/user/MyDocs/wifi_log1.log
	   echo $lan > /home/user/MyDocs/wifi_lan.log
          fi
else
if [[ "$status_wifi" == "disconnected" ]]; then
          if [[ "$status_wifi" == "$wifi_log" ]]; then
          :
          else     
          wf_name=$(cat /home/user/MyDocs/wifi_log1.log)
          lan_name=$(cat /home/user/MyDocs/wifi_lan.log)
	   qdbus com.mikeasoft.rockwatch /rockwatch showSMS "N9" "$lan_name ""$wf_name ""$status_wifi"
          echo $status_wifi > /home/user/MyDocs/wifi_log.log
fi
fi
fi

sleep 1
done

Quote & Reply |

	Alexxxl	2013-12-22 , 21:53
	Posts: 152 \| Thanked: 91 times \| Joined on Mar 2013 @ Russia Saratov	#134

in the near future:

information about connecting to whatsup / wazzap

weather from meecast (information every two hours)

state RAM (how often have not decided yet)

anything else ...

Quote & Reply |

The Following User Says Thank You to Alexxxl For This Useful Post:
P@t

	Alexxxl	2013-12-23 , 10:21
	Posts: 152 \| Thanked: 91 times \| Joined on Mar 2013 @ Russia Saratov	#135

Meecast

Code:

#!/bin/bash

source /tmp/session_bus_address.user
while true
do


echo "$(qdbus com.meecast.data /com/meecast/data com.meecast.data.GetCurrentWeather)" > /usr/share/meecast.txt
a=$(sed '1!d' /usr/share/meecast.txt)

b=$(sed '2!d' /usr/share/meecast.txt)
c=$(sed '6!d' /usr/share/meecast.txt)
d=$(sed '8!d' /usr/share/meecast.txt)

# echo $a $b $c $d

qdbus com.mikeasoft.rockwatch /rockwatch showSMS "Meecast" "$a ,       ""$b В°C, ""$c,        ""$d"


sleep 7200 
# 2 hours
done

Last edited by Alexxxl; 2013-12-23 at 10:24.

Quote & Reply |

	Alexxxl	2013-12-23 , 11:36
	Posts: 152 \| Thanked: 91 times \| Joined on Mar 2013 @ Russia Saratov	#136

Until he realized functional display the name calling, you can use a script like this (draft, but working)

Code:

#!/bin/bash
echo "-" > /home/user/MyDocs/id_log.log
source /tmp/session_bus_address.user
while true
do
call=$(qdbus com.nokia.CallUi.Context /com/nokia/CallUi/CallStatusBar org.maemo.contextkit.Property.Get | sed '1!d')
id=$(qdbus com.nokia.CallUi.Context /com/nokia/CallUi/ActiveCall org.maemo.contextkit.Property.Get | sed '6!d')
id_log=$(cat /home/user/MyDocs/id_log.log)
      if [[ "$id" == "$id_log" ]]; then
	:           
         else    
	#if [[ "$call" == "true" ]]; then 
	  if [[ "$id" != "$id_log" ]]; then
	name=$(qdbus com.nokia.CallUi.Context /com/nokia/CallUi/ActiveCall org.maemo.contextkit.Property.Get | grep displayName | cut -d ' ' -f2)
 	qdbus com.mikeasoft.rockwatch /rockwatch showSMS "INCOMING CALL " "$name"         
sleep 1	
	qdbus com.mikeasoft.rockwatch /rockwatch showSMS "INCOMING CALL " "$name"    
sleep 2
	qdbus com.mikeasoft.rockwatch /rockwatch showSMS "$name" "INCOMING CALL "          
sleep 0.3
	qdbus com.mikeasoft.rockwatch /rockwatch showSMS "$name" "INCOMING CALL "     
	echo $id > /home/user/MyDocs/id_log.log
fi
fi
 sleep 1
done

upd:
slightly improved.

notification is triggered only if the smartphone is locked

Code:

#!/bin/sh
echo "-" > /home/user/MyDocs/id_log.log
source /tmp/session_bus_address.user
while true
do
call=$(qdbus com.nokia.CallUi.Context /com/nokia/CallUi/CallStatusBar org.maemo.contextkit.Property.Get | sed '1!d')
id=$(qdbus com.nokia.CallUi.Context /com/nokia/CallUi/ActiveCall org.maemo.contextkit.Property.Get | sed '6!d')
id_log=$(cat /home/user/MyDocs/id_log.log)
      if [[ "$id" == "$id_log" ]]; then
	:           
      else    
if [[ "$call" == "true" ]]; then 
		if [[ "$id" != "$id_log" ]]; then
			name=$(qdbus com.nokia.CallUi.Context /com/nokia/CallUi/ActiveCall org.maemo.contextkit.Property.Get | grep displayName | cut -d ' ' -f2)
 			qdbus com.mikeasoft.rockwatch /rockwatch showSMS "INCOMING CALL " "$name"         
			sleep 1	
			qdbus com.mikeasoft.rockwatch /rockwatch showSMS "INCOMING CALL " "$name"    
			sleep 2
			qdbus com.mikeasoft.rockwatch /rockwatch showSMS "$name" "INCOMING CALL "          
     			echo $id > /home/user/MyDocs/id_log.log
		else
			: 
		fi
else
			: 
		fi



	fi
 sleep 1
done

Last edited by Alexxxl; 2013-12-23 at 13:50.

Quote & Reply |

	ARJWright	2013-12-23 , 17:45
	Posts: 861 \| Thanked: 734 times \| Joined on Jan 2008 @ Nomadic	#137

dang... latest developments are kinda hot. I'm using a Polar Loop right now, but this might make me pick up a Pebble a good bit faster than I figured I'd get a new one.

Seriously, this is nice work.

__________________

antoinerjwright.com | Mobile Ministry Magazine

Quote & Reply |

The Following User Says Thank You to ARJWright For This Useful Post:
imaginaryenemy

	Elleo	2013-12-24 , 04:44
	Posts: 266 \| Thanked: 979 times \| Joined on Jan 2010 @ London	#138

Just uploaded version 1.3 for QA, hopefully it'll get processed before the store gets locked down. This version now adds caller id for incoming call notifications and fixes incorrect time offsets when setting the watch's time from the phone.

Any future releases will be through OpenRepos and will probably just be donation supported.

Quote & Reply |

The Following 5 Users Say Thank You to Elleo For This Useful Post:
Alexxxl, ARJWright, Boxeri, imaginaryenemy, tigas

	Ancelad	2013-12-24 , 06:58
	Posts: 1,552 \| Thanked: 3,108 times \| Joined on Jun 2012 @ Russia, 96	#139

Originally Posted by Alexxxl

Meecast

Code:

#!/bin/bash

source /tmp/session_bus_address.user
while true
do


echo "$(qdbus com.meecast.data /com/meecast/data com.meecast.data.GetCurrentWeather)" > /usr/share/meecast.txt
a=$(sed '1!d' /usr/share/meecast.txt)

b=$(sed '2!d' /usr/share/meecast.txt)
c=$(sed '6!d' /usr/share/meecast.txt)
d=$(sed '8!d' /usr/share/meecast.txt)

# echo $a $b $c $d

qdbus com.mikeasoft.rockwatch /rockwatch showSMS "Meecast" "$a ,       ""$b В°C, ""$c,        ""$d"


sleep 7200 
# 2 hours
done

Hmm, why you use old version? I've told you new one yesterday, as you remember