TOHKBD rev2 - Page 163 - maemo.org

zagrim | # 1621 | 2015-07-27, 13:37 | Report

Originally Posted by stefanmohl View Post

Well, the TJC-thread has already come up with a solution to the unresponsive key-problem for me! All it required was pushing the keypad around, as described here: https://together.jolla.com/question/...sponsive-keys/

Good that it fixed everything for you (and to many others, too), but even though I've been doing that, too, I haven't reached perfection yet. All of the three affected keys can be easily got to "click" without having text output :P But then again, it's much better already now than originally

stefanmohl | # 1622 | 2015-07-27, 13:48 | Report

Well the TJC thread is still open, there might be other solutions that remain to be found! Let's keep experimenting and sharing the knowledge, and we will all be happy campers!

In fact, I do have one key ('5') that still is slightly off from perfect. But the others were so much worse before that I didn't even notice that one in the beginning!

The Following 2 Users Say Thank You to stefanmohl For This Useful Post:
Amboss, jalyst

epninety | # 1623 | 2015-07-27, 22:17 | Report

First chance to play properly with my tohkbd, and I think its excellent

Some keys seem more sensitive than others but also a bit variable... sometimes works better than other times. All work though, will play with it for a few days before deciding if it needs any further attention.
Already a huge improvement on the on-screen version imho.

The Following 2 Users Say Thank You to epninety For This Useful Post:
Feathers McGraw, yawuji

rooster13 | # 1624 | 2015-07-28, 05:29 | Report

My CTRL key started to jam even the key is not pressed and the indicator light is not on. Seems like it goes on constantly and I need to press it once to be able to write. The kbd becomes usable for a moment until it happens again.

Anyone else having the same?

kimmoli | # 1625 | 2015-07-28, 08:30 | Report

install mce-tools package, and run

evdev_trace -t

and check is there extra CTRL key presses... look for something like this:

Code:

...EV_KEY - 0x01d/KEY_LEFTCTRL - 1
...EV_SYN - 0x000/SYN_REPORT - 0
...EV_KEY - 0x01d/KEY_LEFTCTRL - 0
...EV_SYN - 0x000/SYN_REPORT - 0

Tohkbd is typically /dev/input/event13

The Following 7 Users Say Thank You to kimmoli For This Useful Post:
Feathers McGraw, hhbbap, minimos, rooster13, santeira, Tsippaduida, zagrim

deryo | # 1626 | 2015-07-28, 09:40 | Report

Originally Posted by Feathers McGraw View Post

I'm hoping it'll come today, and that the package is small enough to fit through my letter box

You can test it: The box is ~ 2.8 x 15.8 x 23.2 cm big.

The Following User Says Thank You to deryo For This Useful Post:
gsalone

sunsurfer | # 1627 | 2015-07-28, 10:45 | Report

Mine arrived today (UK). Not installed it yet but looks lovely. I might lightly varnish the walnut back.

The Following 3 Users Say Thank You to sunsurfer For This Useful Post:
Feathers McGraw, ggabriel, yawuji

dukenukem | # 1628 | 2015-07-28, 10:52 | Report

Mine just arrived today. Finally it feels like a big n900 just as it should. It is working great, except the 'a'-key requires a bit more pressure but you could fix that as described here https://together.jolla.com/question/...sponsive-keys/

The Following 3 Users Say Thank You to dukenukem For This Useful Post:
Amboss, Feathers McGraw, ggabriel

sfb | # 1629 | 2015-07-28, 11:29 | Report

Mine arrived too to day. Everything is working well, got a wrong backplate Kelo instead of carbon, but i think i'm fine with it.

Thanks to Dirk and the Team for all the effort!

The Following 2 Users Say Thank You to sfb For This Useful Post:
ggabriel, mosen

yawuji | # 1630 | 2015-07-28, 11:57 | Report

This wait is killing me

. @Feathers McGraw and tetris11_ , have you received yours..