|
#1
|
|||
|
|||
![]() Here is a working port of Kali Linux Rolling Edition with Kernel 4.5 for our Nokia N900 device. This port is much more stable than my previous port, I have not faced any kernel panic errors, segmentation faults etc. Everything that worked in my previous port should work in this port. I have attached working kali-rolling rootfs image to this post along with installation instructions. Installation instructions: Step 1: Get a 8GB or more sized memory card. Step 2: Extract 'kali-rolling.7z' file, it will give you 'kali-rolling.img' file. Step 3: Insert your memory card to a linux system. Step 4: Write the extracted 'kali-rolling.img' file to your sdcard (sudo dd if=/path to the extracted .img file/kali-rolling.img of=/dev/sdx bs=1M (here replace x with your sdcard device letter)). Step 5: Install pali's U-Boot in your phone (Maemo). Step 6: Copy 'configure_u-boot.sh' file to your phone memory, and run it as root user ('$ sudo gainroot' then '# ./configure_u-boot.sh'). Step 7: Insert your sdcard into your phone. Step 8: Switch off and slide up your phone then switch on. And choose Kali-Rolling OS from the list. Step 9: Configure your Kali OS on your first boot. Step 10: Login with username 'user' and password with the password that you have specified during configuration. Step 11: After everything works fine, shutdown your device and resize your sdcard's existing partition using any partition managing tool and you can add a 'swap' partition to your sdcard if you want. Dowload link: Kali Linux Rolling Edition for Nokia N900 I have built this using the official documentation from kali I thank every person who put their effort on this device. Especially wicket, I have used his scripts for patching the kali's rootfs. Hope you enjoy! Last edited by rapol.goutham; 2016-03-31 at 17:44. Reason: Updated instructions |
| The Following 39 Users Say Thank You to rapol.goutham For This Useful Post: | ||
Boemien, Brodyga, chill, DA5, Dongle Fongle, endsormeans, epninety, explit, Fatalist, freemangordon, Halftux, hrbani, immi.shk, jellyroll, justmemory, Kabouik, Macros, MINKIN2, napaDokc, nieldk, panjgoori, Redouan, reinob, rewan, RiD, Roth, santeira, saponga, shawnjefferson, sLumPia, Sohil876, ste-phan, t-b, tcbl50, Tiran, tmi, wicket, xes, xiskillo | ||
|
#2
|
|||
|
|||
|
Reserved
Last edited by rapol.goutham; 2016-03-31 at 17:45. |
| The Following User Says Thank You to rapol.goutham For This Useful Post: | ||
|
#3
|
|||
|
|||
|
Awesome! Kernel 4.5? Does this kernel support telephony?
|
| The Following 3 Users Say Thank You to t-b For This Useful Post: | ||
|
#4
|
||||
|
||||
|
good question.
telephony and audio were an issue if I remember when I was playing with the old version.. If it has no seg. faults... or panics.. or updating probs... etc.. I would hope it handles tele and audio... crossing fingers to hear back from rapol the good news...
__________________
Lurker since 2007, Member since 2013, Certifiable since 1972 Owner of : 1-n770 (in retirement), 3-n800's / 3-n810's (still in daily use), 5-n900's ((3 are flawless, 1 loose usb ( parts), 1 has no telephony (parts)) 3-nexus 5's : 1 w/ Floko Pie 9.1 (running beautifully) waiting for Stable Droid 10 rom, 1 w/ ̶Ubuntu Touch, 1 with Maru OS (intend maemo leste when ready) 1/2 - neo900 pre- "purchased" in 2013. N̶o̶w̶ ̶A̶w̶a̶i̶t̶i̶n̶g̶ ̶r̶e̶f̶u̶n̶d̶ ̶p̶r̶o̶c̶e̶s̶s̶ ̶l̶a̶s̶t̶ ̶f̶e̶w̶ ̶y̶e̶a̶r̶s̶ - neo900 start up declared officially dead - Lost invested funds. PIMP MY N8X0 (Idiot's Guide and a video walkthrough)http://talk.maemo.org/showthread.php?t=94294 THE LOST GRONMAYER CATALOGShttp://talk.maemo.org/showthread.php...ight=gronmayer N8X0 VIDEO ENCODING THE EASY WAYhttp://talk.maemo.org/showthread.php...ght=mediacoder 242gb ON N800http://talk.maemo.org/showthread.php?t=90634 THE PAIN-FREE MAEMO DEVELOPMENT LIVE DISTRO-ISO FOR THE NOOB TO THE PROhttp://talk.maemo.org/showthread.php?t=95567 AFFORDABLE MASS PRODUCTION FOR MAEMO PARTShttp://talk.maemo.org/showthread.php?t=93325 Meateo balloons now available @ Dave999's Meateo Emporium |
| The Following User Says Thank You to endsormeans For This Useful Post: | ||
|
#5
|
|||
|
|||
|
I have not yet tested telephony or audio, mostly the telephony will be supported by the kernel. Don't have enough time to test them
|
|
#6
|
|||
|
|||
|
Just checked http://elinux.org/N900/Changelog
Seems to have speech since 4.1 |
| The Following 4 Users Say Thank You to t-b For This Useful Post: | ||
|
#7
|
|||
|
|||
|
Quote:
|
| The Following 4 Users Say Thank You to rapol.goutham For This Useful Post: | ||
|
#8
|
|||
|
|||
|
Not sure - maybe this helps someone?
http://pavelmachek.livejournal.com/130784.html#comments |
| The Following 3 Users Say Thank You to t-b For This Useful Post: | ||
|
#9
|
|||
|
|||
|
Quote:
|
| The Following User Says Thank You to rapol.goutham For This Useful Post: | ||
|
#10
|
|||
|
|||
|
I am trying installing it and I think everything went good until I typed my password, but now I only have a black screen with a blinking underscore on the top left. I have waited a bit just in case the first boot would be longer, but it has been more than 10 min now. Am I doing something wrong?
|
![]() |
| Tags |
| kali armhf, kali latest, kali n900, kali rolling |
|
|