Jolla C - Page 59 - maemo.org

mosen | # 581 | 2016-07-07, 08:51 | Report

hm, maybe sticky is a little to harsh.
I ment there is a noticeable difference in resistance when sliding on TGP compared to glass. At least from the 3 different ones i tried, non was comparable to glass.
To the extent that my wife demanded to take the Brotech TPG off from Jolla Tablet again because her Fruit Ninja score went down

I guess oleophobic ≠ anti-stick.

Last edited by mosen; 2016-07-07 at 08:57.

The Following 3 Users Say Thank You to mosen For This Useful Post:
juiceme, lal, pichlo

juiceme | # 582 | 2016-07-07, 09:08 | Report

Originally Posted by mosen View Post

Tampered Glass is a composit of at least 4 layers, much like your car windscreen.
Usually starting with shock absorbent and adhesive silicon on the bottom layer that sticks to the screen, followed by PET film, and an optically clear adhesive to sandwich the previous two layers with the next two, which are the actual hardend "tempered" glass and oleophobic coating to keep dat grease on ya fingaz.
All is compressed to neat 0,4mm thickness.

You do not want to drill or cut because it will completely mess up the structure and planeness.

Hmm, have you actually tried to file/dremel holes to it?
With very high-grade sanding and fast tool it should cause no stress to the material.

The Following 2 Users Say Thank You to juiceme For This Useful Post:
mosen, pichlo

mosen | # 583 | 2016-07-07, 09:48 | Report

The composite makes it really hard to find the correct drilling method.
If you go for speed to not hurt the glass, it heats up and melts the surrounding coating/PET for example.
I did not accomplish to cut out jolla speaker holes from a htc one M7 Protector.
So at least i failed

The Following 5 Users Say Thank You to mosen For This Useful Post:
eekkelund, juiceme, lal, pichlo, r0kk3rz

r0kk3rz | # 584 | 2016-07-07, 14:00 | Report

Originally Posted by mosen View Post

The composite makes it really hard to find the correct drilling method.
If you go for speed to not hurt the glass, it heats up and melts the surrounding coating/PET for example.
I did not accomplish to cut out jolla speaker holes from a htc one M7 Protector.
So at least i failed

So its a group buy job then

The Following 6 Users Say Thank You to r0kk3rz For This Useful Post:
Feathers McGraw, Fellfrosch, juiceme, lal, mosen, peterleinchen

mosen | # 585 | 2016-07-07, 14:12 | Report

I just called with Bedifol GmbH and they are strictly cutting Vikuiti™ foiles as a licensed partner.
We would have to look for a chinese contact, like this one

Originally Posted by

6.MOQ:
Some time 50-100pcs is acceptable.

sounds promising

Edit, here is a quick mock-up based on frontal photos, cut and resized to 1420x720px phonesize, 1mm=10px.
Screenprotector would be 135x68mm to play safe.
A 100% fit would need to be based on correct measures.

Last edited by mosen; 2016-07-07 at 15:07.

The Following 11 Users Say Thank You to mosen For This Useful Post:
curryfun, explit, Feathers McGraw, Fellfrosch, Jordi, juiceme, lal, mrsellout, pagis, peterleinchen, rolh

peterleinchen | # 586 | 2016-07-07, 15:10 | Report

Originally Posted by r0kk3rz View Post

So its a group buy job then

Put me in, as SOON as we receive the device (and can feel the need for a real protector...)

The Following 3 Users Say Thank You to peterleinchen For This Useful Post:
Fellfrosch, juiceme, mosen

explit | # 587 | 2016-07-07, 16:33 | Report

Originally Posted by mosen View Post

I just called with Bedifol GmbH and they are strictly cutting Vikuiti™ foiles as a licensed partner.
We would have to look for a chinese contact, like this one

sounds promising

Edit, here is a quick mock-up based on frontal photos, cut and resized to 1420x720px phonesize, 1mm=10px.
Screenprotector would be 135x68mm to play safe.
A 100% fit would need to be based on correct measures.

http://mosushi.net/misc/TPG_jollac.png

Sorry, my mistake:
It was not Bedifol GmbH, it was: www.schutzfolien24.de

They have some assistant on their website.

The Following 6 Users Say Thank You to explit For This Useful Post:
Feathers McGraw, Fellfrosch, juiceme, lal, mosen, peterleinchen

jameson | # 588 | 2016-07-07, 17:52 | Report

Did anybody bother to look on their own local Amazon for Jolla C Displayschutz?
Try that, you could be in for a surprise.

mosen | # 589 | 2016-07-07, 18:07 | Report

Originally Posted by explit View Post

Sorry, my mistake:
It was not Bedifol GmbH, it was: www.schutzfolien24.de

They have some assistant on their website.

Nice!
I started a request for prices for 50,100,200 and 500 pcs based on the mock up, lets see if they can do it for a reasonable price.
Material would be my not so favoured "Brotect AirGlass", Vikuiti DQCT130 or Savvies SU75.

I think the later two are not glass but foils.

The Following 7 Users Say Thank You to mosen For This Useful Post:
eekkelund, Fellfrosch, Jordi, juiceme, lal, pagis, peterleinchen

Fellfrosch | # 590 | 2016-07-07, 18:35 | Report

If it will be a reasonable price count me in as well.

The Following 2 Users Say Thank You to Fellfrosch For This Useful Post:
juiceme, mosen